SPRING EASTER BASKET using FLOWERING FIELDS PAPER - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is an Easter Basket that I made using Flowering Fields Designer Series Paper.  It measures 3 1/4 round by 2 3/4" high.  I also used Flowering Tulips stamp set, the Tulips dies, Layering Circle dies and Highland Heather Grosgrain Ribbon.  You can get two of these Baskets from one piece (12x12") of Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Flowering Fields Designer Series Paper sized  10 1/2  x  5".

I scored the  10 1/2" side at:

1,  2,  3,  4,  5,  6,  7,  8,  9  and  10".

I scored the  5" side at:

1 1/2  and 4 1/4"

To cut and put the basket together you can watch my Video Tutorial Here.

I put the basket together with Liquid Glue.

Below is a picture of my Template.  Your DSP should look like this after scoring and cutting.

I folded the top 3/4" strip inside the box and attached it with Liquid Glue.

Then I put the bottom of the box together.

I cut 2 Highland Heather Cardstock circles, 2 5/8", for the bottom and inside bottom of the Basket.  I attached them with Liquid Glue.

I used a piece of Highland Heather Cardstock, sized  3/4  x  8 1/2" for the handle.

I put Liquid Glue on the ends of the strip and glued about 1" of the strip below each side.

I stamped the Tulip image from Flowering Tulips stamp set onto Basic White Cardstock.

I stamped the first stamp with Daffodil Delight Ink.

I stamped the second part of the Tulip with Crushed Curry Ink.

I stamped the inside with Tuxedo Black Ink.

I colored the remaining white areas of the Tulip with a Light So Saffron Stampin' Blend.

I cut the image out using the Tulip dies.

I cut out three more circles using the Layering Circle dies.

I cut a smooth circle from Highland Heather Cardstock sized 1 7/8".

I cut a scalloped circle from So Saffron Cardstock sized 2".

I cut a smooth circle from Pear Pizzazz Cardstock sized 1 7/8".

I attached the circles together in size order with Liquid Glue.

I attached the Tulip on top of the Highland Heather circle with Dimensionals.

I attached the entire piece to the front of the Basket with Dimensionals also.

I tied Highland Heather Grosgrain Ribbon in a bow at the top of the handle and for the final touch I added 3  2021-2023 In Color Jewels around the Tulip.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Flowering Fields Designer Series Paper

Flowering Tulips stamp set

Tulips dies

Layering Circles dies

Highland Heather Grosgrain Ribbon

2021-2023 In Color Jewels

Highland Heather Cardstock

So Saffron Cardstock

Pear Pizzazz Cardstock

Basic White Cardstock

Daffodil Delight Ink

Crushed Curry Ink

Tuxedo Black Ink

Light So Saffron Stampin' Blend

Liquid Glue

Dimensionals

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today!  I hope you enjoyed my Basket.

See you next time.

Love and Hugs,

Cathryn

CHOCOLATE LADYBUG WINDOW BOX with the LADYBUG BUILDER PUNCH - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Window Box that measures

4 1/2  x  3 1/2  x  3/4".  It holds 4 Lindt Ladybug and Bee Chocolates.  I used Hello Ladybug stamps set, the Ladybug Builder Punch, Seasonal Label dies and Abstract Beauty Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Real Red Cardstock sized

7 1/2  x  7 1/2".

I scored the first 7 1/2" side at:

3/4,  1 1/2,  3 1/4  and  4".

I turned the Cardstock 1/4 turn and scored the second  7 1/2" side at:

3/4,  1 1/2,  6  and  6 3/4".

To cut and put the box together you can watch my Video Tutorial here.

Below is a picture of how your Cardstock should look after scoring, cutting and rounding the corners of the side and top flaps with the Detail Trio Punch.

Before putting the box together I attached one piece of

Abstract Beauty Designer Series Paper to the front area of the box (4 1/2 x 1 3/4 area) with Stampin' Seal.

I cut the window out with a label from the Seasonal Labels dies.

I attached a piece of Window Sheet, sized  4 1/4  x  1 1/2", to the inside of the box with Glue Dots.

I put the box together with Liquid Glue.

I attached the other piece of Abstract Beauty Designer Series Paper to the top area of the box with Liquid Glue.

I stamped the images from Hello Ladybug stamp set onto Basic White Cardstock.

I stamped the Ladybug body with Tuxedo Black Ink.

I stamped the wings with Real Red Ink.

I stamped the Spots on the wings with Tuxedo Black Ink.

I cut the Ladybug out using the Ladybug Builder Punch.

I fussy cut the flowers out by hand.

I attached the wings to the ladybug with Mini Dimensionals on the bottom of the wings and Liquid Glue on the neck.

I stamped the flowers onto Basic White Cardstock with Daffodil Delight Ink.

I stamped the sentiment, from Easter Friends stamp set, onto the Real Red Cardstock side of the label we cut out for the window.  I used Tuxedo Black Ink.

I attached the label to the upper part of the box with Liquid Glue.

I attached the Ladybug to the right side of the label with Dimensionals.

I attached the flowers around the window with Liquid Glue.

I added Wonderful Gems to the middle of the flowers and a Matte Black Dot to the left side of the sentiment label.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Hello Ladybug stamp set

Ladybug Builder Punch

Seasonal Label dies

Easter Friends stamp set

Abstract Beauty Designer Series Paper

Detail Trio Punch

Real Red Cardstock

Basic White Cardstock

Window Sheets

Real Red Ink

Daffodil Delight Ink

Tuxedo Black Ink

Wonderful Gems

Matte Black Dots

Glue Dots

Mini Dimensionals

Dimensionals

Liquid Glue

Stampin' Pierce Mat

Simply Scored

Take Your Pick Tool

Small Hole Punch

Lindt Bugs and Bees Chocolate - Target

Thank you for visiting my Blog today!  I hope you enjoyed my Window Box.

See you next time.

Love and Hugs,

Cathryn

FRIENDS of the FOREST WINDOW BOX with DELIGHTFUL TAG TOPPER PUNCH - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Window Box that measures  3 3/4  x  2  x  2".  It will hold at least 10 chocolate eggs or many other treats.  I used Friends of the Forest stamp set, Rectangle Stitched dies, Layering Circle dies, Delightful Tag Topper Punch and Abstract Beauty Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Magenta Madness Cardstock sized

8 1/2  x  7 5/8".

I scored the  8 1/2" side at:

1/2,  2 1/2,  4 1/2  and  6 1/2".

I scored the  7 5/8" side at:

2,  4 1/2  and 6".

To cut the Cardstock you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

Before I put the box together I cut the hole for the Window.

I attached a piece of Abstract Beauty Designer Series Paper,

sized  2 1/4  x  1 3/4",  to the panel shown below, with Stampin' Seal.

I cut the window with a  1 1/4  x  1 3/4" die from the Rectangle Stitched dies.

I attached a piece of Window Sheet sized  2 1/4  x  1 3/4" to the inside of the box with Glue Dots.

Then I put the box together with Tear and Tape.

I punched the front flap with the Delightful Tag Topper Punch.

I attached more pieces of Abstract Beauty Designer Series Paper to the box.

(3) more sized  2 1/4  x  1 3/4" for the rest of the sides.

(2)  1 3/4  x  1 1/4"  for the inside and back flaps.

(1)  1 3/4  x  1 3/8"  for the front flap which I punched one edge with the Delightful Tag Topper Punch.

I attached the DSP to the box with Liquid  Glue.

I attached 3/8" Velcro Adhesive Dots inside the top flap and the inside front flap.

I put a large Playing with Patterns Resin Dot over the hole from the Delightful Tag Topper Punch.

I tied Just Jade Gingham Ribbon, from the Flowers for Every Season Ribbon Combo Pack, around the flap and tied a bow at the front.

I stamped the Bunny image, from Friends of the Forest stamp set, onto Basic White Cardstock with Tuxedo Black Ink.

I colored the image with Stampin' Blends.

Light Smokey Slate for around the Bunny.

Color Lifter for softening the edges of the Light Smokey Slate.

Light Flirty Flamingo for inside the Ears and the Tail.

I fussy cut the Bunny out by hand.

I cut a 1 1/8" circle from Abstract Beauty DSP and a larger scalloped circle from Magenta Madness Cardstock using the Layering Circle dies.

I attached the circles together and the Bunny on top with Liquid Glue.

For the final touch I added 3 Playing with Patterns Resin Dots around the Bunny.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Friends of the Forest stamp set

Rectangle Stitched dies

Layering Circle dies

Delightful Tag Topper Punch

Abstract Beauty Designer Series Paper

Magenta Madness Cardstock

Basic White Cardstock

Window Sheets

Tuxedo Black Ink

Light Smokey Slate Stampin' Blend

Light Flirty Flamingo Stampin' Blend

Color Lifted Stampin' Blend

Flowers For Every Season Ribbon Combo Pack

Stampin' Seal

Glue Dots

Liquid Glue

Dimensionals

3/8" Adhesive Velcro Dots

Thank you for visiting my Blog today!  I hope you enjoyed my Window Box.

See you next time.

Love and Hugs,

Cathryn

FLOWERING TULIPS ELEGANT & EASY GIFT POUCH - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Treat/Gift Pouch that measures

3 1/2  x  5  x  up to 1 1/2".   It will fit one Hershey's Chocolate Bunny or other small treats.  I used Flowering Tulips stamp set, Tulips dies, Flowering Fields Designer Series Paper, Tailor Made Tags dies and Windowpane Check Ribbon.

You can watch my Video Tutorial Here!

I started with a piece of Flowering Fields Designer Series Paper sized  10 1/2  x  6".

I scored the  10 1/2"  side at:

1/2,  4,  4 3/4,  5 1/2,  9  and  9 3/4".

I scored the  6"  side at:

1".

To cut and put the pouch together you can watch my Video Tutorial Here.  Below is a picture of how your DSP should look after scoring and cutting.

I rounded the edges of the bottom flap with the Detail Trio Punch.

I stamped the Tulip image, from Flowering Tulips stamp set, onto Basic White Cardstock.

I stamped the wider image with Highland Heather Ink.

I stamped the smaller image on top of the first image with Fresh Freesia Ink.

I stamped the stem and leaves with Evening Evergreen Ink.

I cut the pieces out using the Tulips dies.

I cut a large tag from Fresh Freesia Cardstock using the larges die from the Tailor Made Tags dies.

I arranged the flower and leaves on the tag how I liked them.

I attached the Flower onto the tag with Liquid Glue.

I tied a bow on the top of the tag with Gold Trim from the Simply Elegant Trim Pack.

I tied a bow around a gold Bulldog Clip (Amazon) with Evening Evergreen Windowpane Checked Ribbon.

I put the candy inside the pouch and clipped it closed with the Bulldog Clip.  I tucked the edge of the tag under the edge of the clip.

For the final touch I added three 2021-2023 In Color Jewels to the tag.

You can shop for all your Stampin' Up! supplies with Me here.

Supplies:

Flowering Tulips stamp set

Tulips dies

Tailor Made Tags dies

Flowering Fields Designer Series Paper

Fresh Freesia Cardstock

Basic White Cardstock

Highland Heather Ink

Fresh Freesia Ink

Evening Evergreen Ink

Evening Evergreen Windowpane Check Ribbon

Simply Elegant Trim 

2021-2023 In Color Jewels

Simply Scored

Take Your Pick Tool

Tear and Tape

Liquid Glue

Bulldog Clip

Thank you for visiting my Blog today!  I hope you enjoyed my pouch.

See you next time.

Love and Hugs,

Cathryn

EASTER PEEPS BOX with FLOWERING FIELDS - PLUS 3000th SUBSCRIBER GIVEAWAY - Stampin' Up!

Shop Stampin Up! Here

Hi Friends!

My project today is a Treat Box I made to fit marshmallow peeps.  It measures  3  x  4  x  1 1/4".  I used Easter Friends stamp set, Flowering Fields Designer Series Paper and the Layering Circle dies.

You can watch my Video Tutorial Here!

I started with a piece of So Saffron Cardstock

sized  9 1/4  x  5 1/2".

I scored the  9 1/4" side at:

4  and  5 1/4".

I scored the  5 1/2" side at:

1 1/4  and  4 1/4".

I turned back to the 9 1/4" side and scored to the 1st scoreline ONLY at:

2  and  7 1/4".

I scored both 9 1/4" sides in the same way.

I rounded the corners of the flaps and cut a hole in the middle of each side using the Detail Trio Punch.

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring, cutting, rounding the corners and cutting a hole in the middle of the flaps.

I added Highland Heather Cardstock and Flowering Fields Designer Series Paper to the front and back of the box.

(2)  2 7/8  x  3 3/8"  of Highland Heather Cardstock.

(2)  2 3/4  x  3 1/4"  of Flowering Fields DSP.

I attached the DSP to the Highland Heather Cardstock and then to the box with Liquid Glue.

I put 2 Marshmallow Peeps in a cellophane bag inside the box.  The box will also hold 3 bags of Fun Sized M&M's and many other treats.

I ran a  5" piece of Metallic Mesh Ribbon through the holes in the front and back of the box.  I tied Highland Heather Grosgrain Ribbon around the Metallic Mesh and tied a bow at the front.

I stamped the Bunny image, from Easter Friends stamp set, onto Basic White Cardstock using Crumb Cake Ink.

I colored the upper part of the Bunny with Stampin' Blends.

Light Crumb Cake for the outer fur.

Light Flirty Flamingo and the Color Lifter for the Cheeks and Nose.

Light Pool Party for the shadow around the outside of the Bunny.

I cut the top of the Bunny out using a 1 7/8" smooth circle from the Layering Circle dies.

I cut a scalloped circle from Highland Heather Cardstock and attached the Image on top with Liquid Glue.

I stamped the "Easter" part of the Happy Easter sentiment, from Easter Friends stamp set, onto a scrap piece of So Saffron Cardstock.  I trimmed down the top and bottom as close as possible and flagged the ends of the Sentiment strip.

I punched a small hole in the beginning of the strip.

I cut a 10" piece of White Baker's Twine and looped it through the Bunny Circles.

I added the sentiment strip on top of the Bunny and tied the entire piece around the bow.

For the final touch I added Iridescent Rhinestone Basic Jewels to the box.

One on the end of the sentiment and 2 on the body of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Easter Friends stamp set

Flowering Fields Designer Series Paper

Layering Circle dies

Detail Trio Punch

So Saffron Cardstock

Highland Heather Cardstock

Basic White Cardstock

Metallic Mesh Ribbon

Highland Heather Grosgrain Ribbon

Iridescent Rhinestone Basic Jewels

Crumb Cake Ink

Tuxedo Black Ink

Light Crumb Cake Stampin' Blend

Light Flirty Flamingo Stampin' Blend

Light Pool Party Stampin' Blend

Color Blender Stampin' Blend

White Baker's Twine

Tear and Tape

Liquid Glue

Simply Scored

Take Your Pick Tool

Small Hole Punch

Thank you for visiting my Blog today!  I hope you enjoyed my Peeps box.

See you next time.

Love and Hugs,

Cathryn

CUTE JELLY BEAN FLAP BOX with HEY BIRTHDAY CHICK - Stampin' Up!

Shop Stampin' Up! Here

Hi Everybody!

My project today is a Gift Box for some Jelly Beans.

It measures  2 3/4  x  2 3/4  x  1 1/2".  I used Hey Birthday Chick stamp set, Hey Birthday Chick dies, Hey Chick stamp set, Messages die, 2021-2023 In Color Designer Series Paper and Stampin' Blends.

You can watch my Video Tutorial Here!

I started with a piece of Soft Saffron Cardstock

sized  10  x  8 1/4".

I scored the  10" side at:

3/4,  2 1/8,  3 5/8,  6 3/8,  7 7/8  and  9 1/4".

I scored the  8 1/4" side at:

1 1/4,  2 3/4,  5 1/2  and  7".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of what your Cardstock should look like after scoring and cutting.

I rounded the sides of the end rectangles on the longer side with the Detail Trio Punch.

I attached pieces of 2021-2023 In Color Designer Series Paper to the box.

(4)  2 1/2  x  1 1/4"  for the sides.

(2)  2 1/2  x  1 1/8"  for the tops.

I attached the DSP to the box with Liquid Glue.

I put my Jelly Beans inside punched two holes in the top flaps with a small hole punch.

I ran Polished Pink Open Weave Ribbon through the holes and tied a bow at the front.

I cut 4 of each color egg from Polished Pink, So Saffron and Highland Heather Cardstocks using the Hey Birthday Chick dies.

I attached one of each color egg to each side of the box with Liquid Glue.

I stamped the Chick image, from Hey Birthday Chick, onto Basic White Cardstock with Tuxedo Black Ink.

I colored the image with Stampin' Blends.

Light Smokey Slate and the Color Lifter for the Egg.

Light So Saffron for the Chick.

Light Pumpkin Pie for the Beak.

Dark Pumpkin Pie for the Feat.

Light Polished Pink, Light Fresh Freesia and Light So Saffron for the Hat.

I cut the Chick image out using the Hey Birthday Chicks dies.

I cut a Label from Polished Pink Cardstock using the Messages die.

I stamped the sentiment, from Hey Chick stamp set, onto the Label with Tuxedo Black Ink.

I attached the label about 1/4" from the right side of the box with Liquid Glue.

I attached the Chick to the side of the sentiment with Dimensionals.

I added some Wink of Stella Glitter to the Chick's Egg and for the final touch Rhinestone Basic Jewels around the sentiment.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Hey Birthday Chick stamp set

Birthday Chick dies

Hey Chick stamp set

Messages die

2021-2023 In Color Designer Series Paper

So Saffron Cardstock

Polished Pink Cardstock

Highland Heather Cardstock

Basic White Cardstock

Light Smokey Slate Stampin' Blend

Light So Saffron Stampin' Blend

Light Highland Heather Stampin' Blend

Light Polished Pink Stampin' Blend

Light and Dark Pumpkin Pie Stampin' Blends

Color Lifter Stampin' Blend

Polished Pink Open Weave Ribbon

Rhinestone Basic Jewels

Wink of Stella

Tear and Tape

Liquid Glue

Dimensionals

Simply Scored

Take Your Pick Tool

Silicone Mat

Small Hole Punch

3x5 Lip and Tape Cello Bags (Amazon)

Thank you for visiting my Blog today!  I hope you enjoyed my Jelly Bean Box.

See you next time.

Love and Hugs,

Cathryn

HELLO LADYBUG MINI GIFT TOTE with a FLOWER USING the LADYBUG BUILDER PUNCH - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Mini Gift Tote that measures

4 1/2  x  3  x  1 1/2".  I made the Flower for the bag using the Wings from the Ladybug Builder Punch.  I also used Hello Ladybug stamp set, Pansy Patch stamp set, Pansy Petals Designer Series Paper and the Layering Circle dies.

You can watch my Video Tutorial Here!

I started with a piece of Pansy Petals Designer Series Paper sized

4 1/2  x  9 1/2".

I scored the 4 1/2" side at:

1 1/2".

I turned the paper 1/4 turn so the horizontal scored line is closer to the top.

I scored it only to the first scoreline at:

1 1/2,  4 1/2,  6  and  9".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of what your DSP should look like after scoring and cutting.

I cut 2 pieces of Soft Succulent Cardstock to  1/2  x  5 1/2"  for the handles.

I put Stampin' Seal+ onto the last 1/2" of each side of the pieces.

I attached the handles to both sides of the tote about 1" from the sides.

To make the flower I cut 7 or 8 Petals (wings) from Blushing Bride Cardstock using the Ladybug Builder Punch.

I attached them together with Liquid Glue by layering them in a circle.

I cut a 1 1/8" circle from Pale Papaya Cardstock using

the Layering Circle dies.

I embossed the circle using the Dots Embossing Folder.

I attached the circle to the middle of the flower with Liquid Glue.

To see how I did it you can watch my Video Tutorial Here.

I stamped the Ladybug, from Hello Ladybug stamp set, onto Basic White Cardstock.

I stamped the body with Tuxedo Black Ink and I stamped the wings with Fresh Freesia Ink.

I cut them out using the Ladybug Builder Punch.

I stamped the sentiment, from Pansy Patch stamp set, onto a 1/2" strip of Fresh Freesia Cardstock using Tuxedo Ink.

I cut the sentiment edges out by hand.

I attached the Flower to the front of the tote with Liquid Glue.

I attached the Ladybug to the side of the Flower with Dimensionals.

I tied a bow with Fresh Freesia Open Weave Ribbon and attached it the the bottom of the left-front handle with a Glue Dot.

I cut the ends of the sentiment by hand and attached it under the edge of the bow with a Glue dot.

For the final touch I added 3 Iridescent Rhinestone Basic Jewels to the Flower.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Hello Ladybug stamp set

Ladybug Builder Punch

Pansy Patch stamp set

Pansy Petals Designer Series Paper

Layering Circle dies

Blushing Bride Cardstock

Soft Succulent Cardstock

Pale Papaya Cardstock

Fresh Freesia Cardstock

Basic White Cardstock

Tuxedo Black Ink

Fresh Freesia Ink

Dots and Checks Embossing Folders

Fresh Freesia Open Weave Ribbon

Iridescent Rhinestone Basic Jewels

Stampin' Seal+

Tear and Tape

Liquid Glue

Glue Dots

Simply Scored

Take Your Pick Tool

Stampin' Pierce Mat

Silicone Mat

Thank you for visiting my Blog today!  I hope you enjoyed my Ladybug and Flower Tote.

See you next time.

Love and Hugs,

Cathryn