Tuesday, December 19, 2023

EASY TRUFFLE TREAT BOX with CHRISTMAS CLASSICS - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Quick and Easy Treat box I made for 2 Lindor Truffles.  It measures  2 1/2  x  3  x  1 1/4".  I used the Christmas Classics stamp set, Merry & Bright dies, Nested Essentials dies, Joy of Christmas Designer Series Paper and Foil Papers.

You can watch my Video Tutorial Here!


I started with a piece of Joy of Christmas Designer Series Paper sized
8  x  5 1/2"
I scored the  8" side at:
1/2,  4 1/4  and  6 3/4".
I scored the  5 1/2" side at:
1 1/4  and  4 3/4".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I stamped off the Pine Sprig, from Christmas Classics stamp set, onto scrap Paper first, then Basic White Cardstock with Old Olive Ink.
I stamped the sentiment, from Christmas Classics stamp set, onto the middle of the Pine Sprig with Cherry Cobbler Ink.


I cut the images out using the Largest Banner die from the Nested Essentials dies.


I put my Truffles inside the box and closed the top over.
I attached a small Binder Clip to the top and slipped the Banner Tag underneath slightly leaning the the left.


I popped the prongs of the clip up and tied White and Silver Sheer Ribbon around them, tying a bow at the front.


I cut 2 Christmas Bulbs out using the Merry & Bright dies.  One from Red Foil Paper and one from Green Foil Paper.
I cut the tops from Silver Foil Paper.
I attached the tops to the Bulbs with a small piece of Tear & Tape.
I attached the bulbs together the Green on Top and over to the left, with Dimenisonals.


I tucked the Bulbs under the left side of the Clip.
For the final touch I added 3 Gold Festive Pearls to the Tag.



Supplies:
Christmas Classics stamp set
Merry & Bright dies
Nested Essentials dies
Joy of Christmas Designer Series Paper
Red, Green and Silver Foil Papers
Basic White Cardstock
Old Olive Ink
Cherry Cobbler Ink
Silver & White Sheer Ribbon
Festive Pearls
Simply Scored
Take Your Pick Tool
Tear & Tape
Liquid Glue
Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my last project of 2023.
See you next time!

Merry Christmas!
Love and Hugs,
Cathryn

Friday, December 15, 2023

MARSHMALLOW SANTA TREAT BOX with FESTIVE & FUN - Stampin' Up!



Hi Friends!
My project today is a Gift Card Holder and Treat Box for a Russell Stover Marshmallow Santa.  It measures  4 1/2  x  3  x  1 1/4".  I used the Festive and Fun stamp set, Mini Pocket Envelope dies, Joyful Specialty DSP and Joy of Christmas DSP.

You can watch my Video Tutorial Here!


I started with a piece of Shaded Spruce Cardstock sized
9 3/4  x  7"
I scored the  9 3/4" side at:
1 1/4,  4 1/4,  5 1/2  and  8 1/2".
I scored the  7" side at:
1 1/4  and  5 3/4".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached 5 pieces of Joyful Specialty Designer Series Paper to the box.
(1)  4 1/4  x  2 3/4"  top
(2)  1  x  4 1/4"  long sides
(2)  1  x  2 3/4"  short sides


I cut a mini envelope from Joy of Christmas Designer Series Paper using the Mini Envelope dies.
I stamped the partial sentiment, From Festive and Fun stamp set, onto the top of the envelope with Veramark Ink and sprinkled White Stampin' Emboss Powder.
Next I heated it up with my Heat Tool.
I folded the envelope and attached the sides with Liquid Glue.


I stamped the Rhino image onto Very Vanilla Cardstock using Tuxedo Black Ink.
I cut the image out using a portion of the Mini Envelope die,
I colored the image with Stampin' Blends.
Light & Dark Smokey Slate  -  Rhino and Sled Bottom, Shadow
Light Flirty Flamingo  -  Ears
Dark Cherry Cobbler  -  Bow on Package, Rhino' Scarf and Skates
Dark Real Red  -  Bow on Wreath, Present and Bird Hats and Scarves
Light & Dark Boho Blue  -  Birds
Dark Daffodil Delight  -  Beaks


I attached the image piece to the front of the Mini Envelope with Liquid Glue.
I doubled a strand of Gold Trim and tied it around the long side of the box.
I tied a bow on the right side.


I attached the Envelope to the front of the box, over the Gold Trim with Dimensionals.
For the final touch I added 3 Gold Blooming Pearls to the upper left of the image piece.



Supplies:
Festive & Fun stamp set
Mini Pocket Envelope dies
Joyful Specialty Designer Series Paper
Joy of Christmas Designer Series Paper
Very Vanilla Cardstock
Versamark Ink
White Stampin' Emboss Powder
Tuxedo Black Ink
Stampin' Blends
Gold Trim
Blooming Pearls
Simply Scored
Heat Tool
Take Your Pick Tool
Tear & Tape
Liquid Glue
Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my project.
See you next time!

Love and Hugs,
Cathryn

Wednesday, December 13, 2023

KINDER ORNAMENTS TREAT BOX with JOLLY WORDS - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Treat Box for Kinder Chocolate Ornaments.  It measures  4 x 3 x 1".  I used the Jolly Words stamp set, Nested Essentials dies, Merry, Bold & Bright Designers Series Paper and Glossy Dots.

You can watch My Video Tutorial Here!


I started with a piece of Melon Mambo Cardstock sized
8 1/2  x  6 3/4"
I scored the  8 1/2" side at:
1,  4,  5  and  8".
I scored the  6 3/4" side at:
1,  5  and  6".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached 6 pieces of Merry, Bold and Bright Designer Series Paper to the box.
(2)  3 3/4  x  2 3/4"  front and back
(2)  3/4  x  3 3/4"  long sides
(2)  3/4  x  2 3/4"  short sides


I stamped the sentiment, from Jolly Words stamp set, onto Basic White Cardstock using Melon Mambo Ink.
I cut the sentiment out using a 2 5/8  x  2" die from the Nested Essentials dies.
I cut another rectangle, sized 3  x  2 3/8", from Granny Apple Green Foil Paper.
I attached them together with Dimensionals.


I used a Dark Granny Apple Green Stampin' Blend to Color in parts of the Ornament.


I took a double strand of Lemon Lime Twist Ribbon and wound it around the left side of the box.
I tied a bow at the top of the front side.


I spread the two strands apart and attached the image piece to the front of the box, on top of the Ribbon strands, with Dimensionals.


For the final touch I added 3 Melon Mambo Glossy Dots around the sentiment.



Supplies:
Jolly Words stamp set
Nested Essentials dies
Merry, Bold and Bright Designer Series Paper
Granny Apple Green Foil Paper
Melon Mambo Cardstock
Basic White Cardstock
Melon Mambo Ink
Dark Granny Apple Green Stampin' Blend
Lemon Lime Twist Ribbon
Glossy Dots Assortment
Simply Scored
Take Your Pick Tool
Tear and Tape
Liquid Glue
Dimensionals
Corner Rounder
Small Circle Punch

Thank you for visiting my Blog today I hope you enjoyed my Treat Box.
See you next time!

Love and Hugs,
Cathryn

Tuesday, December 12, 2023

COCOA & COOKIE TOPPER TREAT BOX with GIFT OF GIVING - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Treat Box for a Cocoa and Cookie Topper I got from Aldi.  It measures  4 1/4  x  3 1/4  x  1".  I used the Gift of Giving stamp set, Stylish Shapes dies, Joyful Specialty Designer Series Paper and Blooming Pearls.

You can watch my Video Tutorial Here!


I started with a piece of Cherry Cobbler Cardstock sized
11 x 6"
I scored the  11" side at:
1/2,  4 3/4,  5 3/4  and  10".
I scored the  6" side at:
1,  4 1/4  and  5 1/4".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of my Template.  This is how your Cardstock should look after scoring and cutting.


I attached 6 pieces of Joyful Specialty Designer Series Paper the box.
(2)  3 x 4" front and back
(2)  3  x  3/4"  short sides
(2)  4  x  3/4"  long sides


I stamped the Cup image, from Gift of Giving stamp set, onto Basic White Cardstock with Tuxedo Black Ink.
I colored the image with Stampin' Blends.
Light & Dark Cherry Cobbler  -  Cup
Dark Real Red  -  Candy Cane and Berries
Dark Shaded Spruce  -  Greenery
Light & Dark Pecan Pie  -  Cookie
Light Smokey Slate & Color Lifter to Blend  -  Marshmallows
I cut the image out using a  2 3/8" square die from the Stylish Shapes dies.


I  cut another square sized  2 3/4  x  2 3/4" from Cherry Cobbler Cardstock using the same dies.
I attached the image on top of the large square with Liquid Glue.
I attached the entire piece to the top/front of the box with Dimensionals.


I tied a bow with Gold Trim and attached it under the squares with Glue Dots and a dab of Liquid Glue.
For the final touch I added 3 Gold Blooming Pearls around the image.



Supplies:
Gift of Giving stamp set
Stylish Shapes dies
Joyful Specialty Designer Series Paper
Cherry Cobbler Cardstock
Basic White Cardstock
Tuxedo Black Ink
Stampin' Blends
Gold Trim
Blooming Pearls
Simply Scored Take Your Pick Tool
Tear & Tape
Liquid Glue
Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my Cookie Topper Cocoa Box.
See you next time!

Love and Hugs,
Cathryn

Wednesday, December 6, 2023

MINI GHIRARDELLI SNOWMAN EAST TREAT BOX with BEARY CUTE STAMP SET - Stampin' Up!


Shop Stampin' Up Here!

Hi Friends!
My project today is a Treat Box for a Mini Ghirardelli Snowman.  It measures  2  x  3 3/4  x 3/4".  I used the Beary Cute stamp set, Beary Christmas Designer Series Paper and Festive Pearls.

You can watch my Video Tutorial Here!


I started with a piece of Real Red Cardstock sized
6  x  4 1/2"
I scored the  6" side at:
3/4,  2 3/4,  3 1/2  and  5 1/2".
I scored the  4 1/2" side at:
3/4  and  3 3/4".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of what your Cardstock should look like after cutting.


I attached 2 pieces of Beary Christmas Designer Series Paper to the box.
(2)  1 3/4  x  2 3/4"  front and back


I stamped the outline of the Tree, from Beary Christmas stamp set, onto Old Olive Cardstock with Mossy Meadow Ink.
I stamped the inner Tree next with Mossy Meadow Ink Also.
I stamped the Hat with Real Red Ink.
I stamped the small Polar Bear with Tuxedo Black Ink.
I fussy cut all of the images out by hand.


I colored the small Polar Bear with Stampin' Blends.
Light Smokey Slate and a Color Lifter to blend  -  Bear
Light Flirty Flamingo and a Color Lifter to blend  -  Cheek


I tied Iridescent Ribbon around the top of the box and tied a bow at the front.
Then I attached the Tree to the front with Dimensionals.
I attached the Polar Bear and the Hat to the bottom of the Tree with Liquid Glue.


For the final touch I added Real Red Festive Pearls to the Tree.



Supplies:
Beary Cute stamp set
Beary Christmas Designer Series Paper
Real Red Cardstock
Old Olive Cardstock
Basic White Cardstock
Mossy Meadow Ink
Tuxedo Black Ink
Stampin' Blends
Iridescent Ribbon
Festive Pearls
Simply Scored
Take Your Pick Tool
Dimensionals
Tear & Tape
Liquid Glue

Thank you for visiting my Blog today.  I hope you enjoyed my Treat Box.
See you next time!

Love and Hugs
Cathryn

Tuesday, December 5, 2023

DOUBLE FLAP CHRISTMAS TREAT BOX with JOLLY WORDS - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a double flap treat box that measures  3 1/4  x  3 1/4  x  1".  I used the Jolly Words stamp set, Stylish Shapes dies, Decked Circle dies, Merry Bold & Bright Designer Series Paper and  Iridescent Discs.

You can watch my Video Tutorial Here!


I started with a piece of Granny Apple Green Cardstock sized
10 1/2  x  8 1/4"
I scored the  10 1/2" side at:
2,  3,  6 1/4  and  7 1/4".
I scored the  8 1/4" side at:
1 1/2,  2 1/2,  5 3/4  and  6 3/4".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardsock should look after scoring and cutting.


I attached several pieces of Merry, Bold and Bright Designer Series Paper to the box.
(2)  1 3/4  x  3"  front and back of left flap.
(2)  3 x 3  front and back of right flap
(4)  3/4  x  3"  sides
(2)  1 1/4  x  3"  inside flaps
I attached the DSP to the box with Liquid Glue.


I stamped the image twice.  Once with Tuxedo Black Ink.  I cut this one out using a 2 1/2" circle die from the Stylish Shapes dies.
I stamped the image a second time with Poppy Parade Ink.
I fussy Cut just the J and the Y out by hand and attached them with Liquid Glue over the Basic Black Image.


I colored the image with Stampin' Blends.
Light and Dark Poppy Parade  -  Hats and Ornaments
Dark Granny Apple Green  -  Wreath and Shirt
Light Flirty Flamingo  -  Cheeks
Dark Petal Pink  -  Face and Arms
Dark Shaded Spruce  -  Stripes on Shirt and Wreath
Dark Daffodil Delight  -  Hair, Bells and Top of Ornament
Light Pecan Pie  -  Hair


I cut a 2 7/8" circle from Shaded Spruce Cardstock using the Deckled Circle dies.
I attached the image circle on top of the one with Liquid Glue.


I tied Silver and White Sheer Ribbon around the box and tied a bow at the top.
I attached the left side of the circles to the left flap, over the ribbon, with Dimensionals.


For the final touch I added 3 Poppy Parade Iridescent Discs to the Wreath.



Supplies:
Jolly Words stamp set
Stylish Shapes dies
Deckled Circle dies
Merry Bold & Bright Designer Series Paper
Granny Apple Green Cardstock
Shaded Spruce Cardstock
Basic White Cardstock
Tuxedo Black Ink
Poppy Parade Ink
Stampin' Blends
Silver & White Sheer Ribbon
Iridescent Discs
Simply Scored Take Your Pick Tool
Tear & Tape
Liquid Glue
Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my Christmas Treat Box.
See you next time!

Love and Hugs,
Cathryn

Friday, December 1, 2023

CHRISTMAS TREE WREATH TREAT BOX with WISHES ALL AROUND - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Treat Box that measures  3 3/4  x  3 3/4  x  1".  I put some Grinch Hersheys Kisses inside.  I used the Wishes All Around stamp set & dies Bundle, Stylish Shapes dies, Joy of Christmas Designer Series Paper and Silver & White Sheer Ribbon.

You can watch my Video Tutorial Here!


I started with a piece of Cherry Cobbler Cardstock sized
10 1/2  x  7 3/4"
I scored the  10 1/2" side at:
1,  4 3/4,  5 3/4  and  9 1/2".
I scored the  7 3/4" side at:
1,  2,  5 3/4  and  6 3/4"
To cut and put the box together you can watch my Video Tutorial here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached several pieces of Joy of Christmas Designer Series Paper to the box.
(2)  3 1/2  x  3 1/2"
(4)  3/4  x  3 1/2"
I cut a 1 5/8" circle from Basic White Cardstock using the Stylish Shapes dies.





Supplies:
Wishes All Around stamp set & dies Bundle
Stylish Shapes dies
Joy of Christmas Designer Series Paper
Cherry Cobbler Cardstock
Basic White Cardstock
Garden Green Ink
Shaded Spruce Ink
Cherry Cobbler Ink
Silver & White Sheer Ribbon
Iridescent Discs
Simply Scored
Take Your Pick Tool
Tear & Tape
Liquid Glue
Dimensionals
Corner Rounder
1" Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Wreath Treat Box.  See you next time!

Love and Hugs,
Cathryn