EASY TRUFFLE TREAT BOX with CHRISTMAS CLASSICS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Quick and Easy Treat box I made for 2 Lindor Truffles.  It measures  2 1/2  x  3  x  1 1/4".  I used the Christmas Classics stamp set, Merry & Bright dies, Nested Essentials dies, Joy of Christmas Designer Series Paper and Foil Papers.
You can watch my Video Tutorial Here!

I started with a piece of Joy of Christmas Designer Series Paper sized

8  x  5 1/2"

I scored the  8" side at:

1/2,  4 1/4  and  6 3/4".

I scored the  5 1/2" side at:

1 1/4  and  4 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I stamped off the Pine Sprig, from Christmas Classics stamp set, onto scrap Paper first, then Basic White Cardstock with Old Olive Ink.

I stamped the sentiment, from Christmas Classics stamp set, onto the middle of the Pine Sprig with Cherry Cobbler Ink.

I cut the images out using the Largest Banner die from the Nested Essentials dies.

I put my Truffles inside the box and closed the top over.

I attached a small Binder Clip to the top and slipped the Banner Tag underneath slightly leaning the the left.

I popped the prongs of the clip up and tied White and Silver Sheer Ribbon around them, tying a bow at the front.

I cut 2 Christmas Bulbs out using the Merry & Bright dies.  One from Red Foil Paper and one from Green Foil Paper.

I cut the tops from Silver Foil Paper.

I attached the tops to the Bulbs with a small piece of Tear & Tape.

I attached the bulbs together the Green on Top and over to the left, with Dimenisonals.

I tucked the Bulbs under the left side of the Clip.

For the final touch I added 3 Gold Festive Pearls to the Tag.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Christmas Classics stamp set

Merry & Bright dies

Nested Essentials dies

Joy of Christmas Designer Series Paper

Red, Green and Silver Foil Papers

Basic White Cardstock

Old Olive Ink

Cherry Cobbler Ink

Silver & White Sheer Ribbon

Festive Pearls

Simply Scored

Take Your Pick Tool

Tear & Tape

Liquid Glue

Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my last project of 2023.

See you next time!

Merry Christmas!

Love and Hugs,

Cathryn

MARSHMALLOW SANTA TREAT BOX with FESTIVE & FUN - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Gift Card Holder and Treat Box for a Russell Stover Marshmallow Santa.  It measures  4 1/2  x  3  x  1 1/4".  I used the Festive and Fun stamp set, Mini Pocket Envelope dies, Joyful Specialty DSP and Joy of Christmas DSP.
You can watch my Video Tutorial Here!

I started with a piece of Shaded Spruce Cardstock sized

9 3/4  x  7"

I scored the  9 3/4" side at:

1 1/4,  4 1/4,  5 1/2  and  8 1/2".

I scored the  7" side at:

1 1/4  and  5 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached 5 pieces of Joyful Specialty Designer Series Paper to the box.

(1)  4 1/4  x  2 3/4"  top

(2)  1  x  4 1/4"  long sides

(2)  1  x  2 3/4"  short sides

I cut a mini envelope from Joy of Christmas Designer Series Paper using the Mini Envelope dies.

I stamped the partial sentiment, From Festive and Fun stamp set, onto the top of the envelope with Veramark Ink and sprinkled White Stampin' Emboss Powder.

Next I heated it up with my Heat Tool.

I folded the envelope and attached the sides with Liquid Glue.

I stamped the Rhino image onto Very Vanilla Cardstock using Tuxedo Black Ink.

I cut the image out using a portion of the Mini Envelope die,

I colored the image with Stampin' Blends.

Light & Dark Smokey Slate  -  Rhino and Sled Bottom, Shadow

Light Flirty Flamingo  -  Ears

Dark Cherry Cobbler  -  Bow on Package, Rhino' Scarf and Skates

Dark Real Red  -  Bow on Wreath, Present and Bird Hats and Scarves

Light & Dark Boho Blue  -  Birds

Dark Daffodil Delight  -  Beaks

I attached the image piece to the front of the Mini Envelope with Liquid Glue.

I doubled a strand of Gold Trim and tied it around the long side of the box.

I tied a bow on the right side.

I attached the Envelope to the front of the box, over the Gold Trim with Dimensionals.

For the final touch I added 3 Gold Blooming Pearls to the upper left of the image piece.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Festive & Fun stamp set

Mini Pocket Envelope dies

Joyful Specialty Designer Series Paper

Joy of Christmas Designer Series Paper

Very Vanilla Cardstock

Versamark Ink

White Stampin' Emboss Powder

Tuxedo Black Ink

Stampin' Blends

Gold Trim

Blooming Pearls

Simply Scored

Heat Tool

Take Your Pick Tool

Tear & Tape

Liquid Glue

Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my project.

See you next time!

Love and Hugs,

Cathryn

KINDER ORNAMENTS TREAT BOX with JOLLY WORDS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Treat Box for Kinder Chocolate Ornaments.  It measures  4 x 3 x 1".  I used the Jolly Words stamp set, Nested Essentials dies, Merry, Bold & Bright Designers Series Paper and Glossy Dots.
You can watch My Video Tutorial Here!

I started with a piece of Melon Mambo Cardstock sized

8 1/2  x  6 3/4"

I scored the  8 1/2" side at:

1,  4,  5  and  8".

I scored the  6 3/4" side at:

1,  5  and  6".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached 6 pieces of Merry, Bold and Bright Designer Series Paper to the box.

(2)  3 3/4  x  2 3/4"  front and back

(2)  3/4  x  3 3/4"  long sides

(2)  3/4  x  2 3/4"  short sides

I stamped the sentiment, from Jolly Words stamp set, onto Basic White Cardstock using Melon Mambo Ink.

I cut the sentiment out using a 2 5/8  x  2" die from the Nested Essentials dies.

I cut another rectangle, sized 3  x  2 3/8", from Granny Apple Green Foil Paper.

I attached them together with Dimensionals.

I used a Dark Granny Apple Green Stampin' Blend to Color in parts of the Ornament.

I took a double strand of Lemon Lime Twist Ribbon and wound it around the left side of the box.

I tied a bow at the top of the front side.

I spread the two strands apart and attached the image piece to the front of the box, on top of the Ribbon strands, with Dimensionals.

For the final touch I added 3 Melon Mambo Glossy Dots around the sentiment.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Jolly Words stamp set

Nested Essentials dies

Merry, Bold and Bright Designer Series Paper

Granny Apple Green Foil Paper

Melon Mambo Cardstock

Basic White Cardstock

Melon Mambo Ink

Dark Granny Apple Green Stampin' Blend

Lemon Lime Twist Ribbon

Glossy Dots Assortment

Simply Scored

Take Your Pick Tool

Tear and Tape

Liquid Glue

Dimensionals

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today I hope you enjoyed my Treat Box.

See you next time!

Love and Hugs,

Cathryn

COCOA & COOKIE TOPPER TREAT BOX with GIFT OF GIVING - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Treat Box for a Cocoa and Cookie Topper I got from Aldi.  It measures  4 1/4  x  3 1/4  x  1".  I used the Gift of Giving stamp set, Stylish Shapes dies, Joyful Specialty Designer Series Paper and Blooming Pearls.
You can watch my Video Tutorial Here!

I started with a piece of Cherry Cobbler Cardstock sized

11 x 6"

I scored the  11" side at:

1/2,  4 3/4,  5 3/4  and  10".

I scored the  6" side at:

1,  4 1/4  and  5 1/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of my Template.  This is how your Cardstock should look after scoring and cutting.

I attached 6 pieces of Joyful Specialty Designer Series Paper the box.

(2)  3 x 4" front and back

(2)  3  x  3/4"  short sides

(2)  4  x  3/4"  long sides

I stamped the Cup image, from Gift of Giving stamp set, onto Basic White Cardstock with Tuxedo Black Ink.

I colored the image with Stampin' Blends.

Light & Dark Cherry Cobbler  -  Cup

Dark Real Red  -  Candy Cane and Berries

Dark Shaded Spruce  -  Greenery

Light & Dark Pecan Pie  -  Cookie

Light Smokey Slate & Color Lifter to Blend  -  Marshmallows

I cut the image out using a  2 3/8" square die from the Stylish Shapes dies.

I  cut another square sized  2 3/4  x  2 3/4" from Cherry Cobbler Cardstock using the same dies.

I attached the image on top of the large square with Liquid Glue.

I attached the entire piece to the top/front of the box with Dimensionals.

I tied a bow with Gold Trim and attached it under the squares with Glue Dots and a dab of Liquid Glue.

For the final touch I added 3 Gold Blooming Pearls around the image.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Gift of Giving stamp set

Stylish Shapes dies

Joyful Specialty Designer Series Paper

Cherry Cobbler Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

Gold Trim

Blooming Pearls

Simply Scored Take Your Pick Tool

Tear & Tape

Liquid Glue

Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my Cookie Topper Cocoa Box.

See you next time!

Love and Hugs,

Cathryn

MINI GHIRARDELLI SNOWMAN EAST TREAT BOX with BEARY CUTE STAMP SET - Stampin' Up!

Shop Stampin' Up Here!

Hi Friends!My project today is a Treat Box for a Mini Ghirardelli Snowman.  It measures  2  x  3 3/4  x 3/4".  I used the Beary Cute stamp set, Beary Christmas Designer Series Paper and Festive Pearls.
You can watch my Video Tutorial Here!

I started with a piece of Real Red Cardstock sized

6  x  4 1/2"

I scored the  6" side at:

3/4,  2 3/4,  3 1/2  and  5 1/2".

I scored the  4 1/2" side at:

3/4  and  3 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of what your Cardstock should look like after cutting.

I attached 2 pieces of Beary Christmas Designer Series Paper to the box.

(2)  1 3/4  x  2 3/4"  front and back

I stamped the outline of the Tree, from Beary Christmas stamp set, onto Old Olive Cardstock with Mossy Meadow Ink.

I stamped the inner Tree next with Mossy Meadow Ink Also.

I stamped the Hat with Real Red Ink.

I stamped the small Polar Bear with Tuxedo Black Ink.

I fussy cut all of the images out by hand.

I colored the small Polar Bear with Stampin' Blends.

Light Smokey Slate and a Color Lifter to blend  -  Bear

Light Flirty Flamingo and a Color Lifter to blend  -  Cheek

I tied Iridescent Ribbon around the top of the box and tied a bow at the front.

Then I attached the Tree to the front with Dimensionals.

I attached the Polar Bear and the Hat to the bottom of the Tree with Liquid Glue.

For the final touch I added Real Red Festive Pearls to the Tree.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Beary Cute stamp set

Beary Christmas Designer Series Paper

Real Red Cardstock

Old Olive Cardstock

Basic White Cardstock

Mossy Meadow Ink

Tuxedo Black Ink

Stampin' Blends

Iridescent Ribbon

Festive Pearls

Simply Scored

Take Your Pick Tool

Dimensionals

Tear & Tape

Liquid Glue

Thank you for visiting my Blog today.  I hope you enjoyed my Treat Box.

See you next time!

Love and Hugs

Cathryn

DOUBLE FLAP CHRISTMAS TREAT BOX with JOLLY WORDS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a double flap treat box that measures  3 1/4  x  3 1/4  x  1".  I used the Jolly Words stamp set, Stylish Shapes dies, Decked Circle dies, Merry Bold & Bright Designer Series Paper and  Iridescent Discs.
You can watch my Video Tutorial Here!

I started with a piece of Granny Apple Green Cardstock sized

10 1/2  x  8 1/4"

I scored the  10 1/2" side at:

2,  3,  6 1/4  and  7 1/4".

I scored the  8 1/4" side at:

1 1/2,  2 1/2,  5 3/4  and  6 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardsock should look after scoring and cutting.

I attached several pieces of Merry, Bold and Bright Designer Series Paper to the box.

(2)  1 3/4  x  3"  front and back of left flap.

(2)  3 x 3  front and back of right flap

(4)  3/4  x  3"  sides

(2)  1 1/4  x  3"  inside flaps

I attached the DSP to the box with Liquid Glue.

I stamped the image twice.  Once with Tuxedo Black Ink.  I cut this one out using a 2 1/2" circle die from the Stylish Shapes dies.

I stamped the image a second time with Poppy Parade Ink.

I fussy Cut just the J and the Y out by hand and attached them with Liquid Glue over the Basic Black Image.

I colored the image with Stampin' Blends.

Light and Dark Poppy Parade  -  Hats and Ornaments

Dark Granny Apple Green  -  Wreath and Shirt

Light Flirty Flamingo  -  Cheeks

Dark Petal Pink  -  Face and Arms

Dark Shaded Spruce  -  Stripes on Shirt and Wreath

Dark Daffodil Delight  -  Hair, Bells and Top of Ornament

Light Pecan Pie  -  Hair

I cut a 2 7/8" circle from Shaded Spruce Cardstock using the Deckled Circle dies.

I attached the image circle on top of the one with Liquid Glue.

I tied Silver and White Sheer Ribbon around the box and tied a bow at the top.

I attached the left side of the circles to the left flap, over the ribbon, with Dimensionals.

For the final touch I added 3 Poppy Parade Iridescent Discs to the Wreath.

You can purchase your Stampin' Up! supplies with Me here.

Supplies:

Jolly Words stamp set

Stylish Shapes dies

Deckled Circle dies

Merry Bold & Bright Designer Series Paper

Granny Apple Green Cardstock

Shaded Spruce Cardstock

Basic White Cardstock

Tuxedo Black Ink

Poppy Parade Ink

Stampin' Blends

Silver & White Sheer Ribbon

Iridescent Discs

Simply Scored Take Your Pick Tool

Tear & Tape

Liquid Glue

Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my Christmas Treat Box.

See you next time!

Love and Hugs,

Cathryn

CHRISTMAS TREE WREATH TREAT BOX with WISHES ALL AROUND - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Treat Box that measures  3 3/4  x  3 3/4  x  1".  I put some Grinch Hersheys Kisses inside.  I used the Wishes All Around stamp set & dies Bundle, Stylish Shapes dies, Joy of Christmas Designer Series Paper and Silver & White Sheer Ribbon.
You can watch my Video Tutorial Here!

I started with a piece of Cherry Cobbler Cardstock sized

10 1/2  x  7 3/4"

I scored the  10 1/2" side at:

1,  4 3/4,  5 3/4  and  9 1/2".

I scored the  7 3/4" side at:

1,  2,  5 3/4  and  6 3/4"

To cut and put the box together you can watch my Video Tutorial here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Joy of Christmas Designer Series Paper to the box.

(2)  3 1/2  x  3 1/2"

(4)  3/4  x  3 1/2"

I cut a 1 5/8" circle from Basic White Cardstock using the Stylish Shapes dies.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Wishes All Around stamp set & dies Bundle

Stylish Shapes dies

Joy of Christmas Designer Series Paper

Cherry Cobbler Cardstock

Basic White Cardstock

Garden Green Ink

Shaded Spruce Ink

Cherry Cobbler Ink

Silver & White Sheer Ribbon

Iridescent Discs

Simply Scored

Take Your Pick Tool

Tear & Tape

Liquid Glue

Dimensionals

Corner Rounder

1" Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Wreath Treat Box.  See you next time!

Love and Hugs,

Cathryn