TRUCKING ALONG FALL PUMPKIN TREAT BOX with NESTED ESSENTIALS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Fall Treat Box that measures  3 3/4  x  3 1/4  x  1".  I used the Trucking Along stamp set & Trucking Along Builder Punch Bundle, Nested Essentials dies, Brights Designer Series Paper and Glittered Organdy Ribbon.
You can watch my Video Tutorial Here!

I started with a piece of Mossy Meadow Cardstock sized

10  x  6"

I scored the  10" side at:

1,  4 3/4,  5 3/4  and  9 1/2"

I scored the  6" side at:

1,  4 1/4  and  5 1/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring, cutting and rounding the top corners.

I attached several pieces of Pumpkin Pie Brights Designer Series Paper to the box.

(2)  3 1/2  x  3"  front and back

(2)  3 1/2  x  3/4"  long sides

(2)  3  x  3/4"  short sides

I attached the DSP with Liquid Glue.

I cut 2 of the Largest rectangle dies using the Nested Essentials dies, 1 from Balmy Blue and 1 from Granny Apple Green Cardstock.

I cut the Granny Apple Green to 3/4" in height.

I attached the Granny Apple Green piece to the bottom of the Balmy Blue Rectangle with Liquid Glue.

I stamped the Shadow onto the Granny Apple Green Section of the Rectangles with Tuxedo Black Ink.

I stamped the inside of the Truck, from Trucking Along stamp set, onto Basic White Cardstock with Mossy Meadow Ink.

I stamped the outline of the Truck with Tuxedo Black Ink.

I stamped the outline of the Tree with Tuxedo Black Ink and the inside with Crushed Curry Ink.

I stamped the outline only of the Cloud with Balmy Blue Ink.

I fussy cut the Tree and Cloud out by hand.

I colored the Truck of the Tree with a Dark Pecan Pie Stampin' Blend.

I colored the Wheels with a Dark Basic Black Stampin' Blend.

To make the Pumpkins I cut out 1/2" circles of Pumpkin Pie Cardstock with a circle punch.

I cut out the top of the circle and added a small strip of Mossy Meadow Cardstock for the stem.

I attached the Pumpkins to the Back of the Truck with Liquid Glue.

I attached the Truck to the Rectangles, just above the Shadow stamp, with Dimensionals.

I attached the Tree in front of the Truck, tucked behind the front bumper, with Liquid Glue.

I attached the Cloud to the upper right side.

I tied Glittered Organdy Ribbon around the long side of the box and tied a bow on the left side.

I attached the Truck piece to the middle of the box, over the ribbon, with Dimensionals.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Trucking Along stamp set & Trucking Along Builder Punch Bundle

Nesting Essentials dies

Brights Designer Series Paper

Mossy Meadow Cardstock

Granny Apple Green Cardstock

Balmy Blue Cardstock

Basic White Cardstock

Mossy Meadow Ink

Crushed Curry Ink

Tuxedo Black Ink

Balmy Blue Ink

Stampin' Blends

Glittered Organdy Ribbon

Simply Scored

Take Your Pick Tool

Tear & Tape

Liquid Glue

Dimensionals

1/2" Circle Punch

Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Fall Treat Box.

See you next time!

Love and Hugs,

Cathryn

TRUCKING ALONG SUMMER TREAT BOX with DELIGHTFULLY ECLECTIC - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Summer Treat Box that measures  3 1/4  x  3 1/4  x  1".  I used the Trucking Along stamp set and Punch Bundle, Stylish Shapes dies, Delightfully Eclectic Designer Series Paper and Brights Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a piece of Boho Blue Cardstock sized

11  x  7 1/4"

I scored the  11" side at:

3 1/4,  4 1/4,  7 1/2  and  8 1/2"

I scored the  7 1/4" side at:

1,  2,  5 1/4  and  6 1/4"

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Delightfully Eclectic and Brights Designer Series Papers to the box.

(3)   3  x  3"  top, bottom and inside flap

(4)   3/4  x  3"  sides

(1)  2 1/4  x  3"  inside body of the box

I attached the DSP to the box with Liquid Glue.

I stamped the Truck, from Trucking Along stamps set, onto Basic White Cardstock.

Inside Truck  -  Boho Blue Ink

Truck Outline  -  Blueberry Bushel Ink

Palm Tree  -  Tuxedo Black Ink

I cut the Truck out using the Trucking Along Builder Punch.

I fussy cut the Palm Tree, Beach Ball and Surf Board piece out by hand.

I colored the images with Stampin' Blends.

Tires and Middle  -  Light Basic Black

Hub Caps  -  Dark Smokey Slate

Palm Tree  -  Dark Old Olive

Palm Tree Trunk  -  Dark Pecan Pie

Surf Board  -  Dark Daffodil Delight

Beach Ball  -  Dark Real Red, Dark Daffodil Delight and Light Boho Blue

I added 3/8" Low Profile Adhesive Backed Velcro Dots inside the box for a closure.

I ran Real Red Ribbon around the side of the flap, about 1/2" down from the top, and tied a bow on the left side.

I cut an another piece of the Delightfully Eclectic DSP using the Stylish Shapes dies (a little more than 2 1/4")

I attached the Square to the front of the box, tucking the top under the Ribbon, with Liquid Glue.

I attached the Truck and Tree piece to the lower part of the Square with Dimensionals.

For the final touch I added 3 2022-2024 In Color Pearls.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Trucking Along stamp set & Trucking Along Builder Punch Bundle

Stylish Shapes dies

Delightfully Eclectic Designer Series Paper

Brights Designer Series Paper

Boho Blue Cardstock

Basic White Cardstock

Boho Blue Ink

Blueberry Bushel Ink

Tuxedo Black Ink

Stampin' Blends

Real Red & Burlap Ribbon Combo Pack

2022-2024 In Color Pearls

Simply Scored

Take Your Pick Tool

Liquid Glue

Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my Summer Treat Box.

See you next time!

Love and Hugs,

Cathryn

HORSE & SLEIGH TREAT BOX with ONE HORSE OPEN SLEIGH - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box that measures  5  x  4  x  1".  I use the Horse & Sleigh stamp set & dies Bundle, One Horse Open Sleigh Designer Series Paper and Adhesive Backed Snowflakes Assortment.
You can watch my Video Tutorial Here!

I started with a piece of Cherry Cobbler Cardstock sized

8 3/4  x  7"

I scored the  8 3/4" side at:

3/4,  1 3/4,  4 3/4  and  5 3/4".

I scored the  7" side at:

1  and  6".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring, cutting and rounding the corners of the flap.

I attached several pieces of One Horse Open Sleigh Designer Series Paper to the box.

(2)  4 3/4  x  2 3/4"  front and back

(2)  3/4  x  4 3/4"  long sides

(2)  3/4  x  2 3/4"  short sides

I attached the DSP to the box with Liquid Glue.

I stamped the Horse & Sleigh image onto Basic White Cardstock with Tuxedo Black Ink.

I colored the images with Stampin' Blends.

Light and Dark Cherry Cobbler  -  Sleigh,  Woman's Clothes and Bridle & Harness

Dark Mossy Meadow  -  Men's Clothes

Dark Smokey Slate  -  Hoove, Snow Shoes and Bottom of Sleigh

Light & Dark Pecan Pie  -  Horse

SU1000  -  Faces

I cut the image out using the Horse & Sleigh dies.

I cut the 2 Snowdrifts out of Basic White Cardstock using the Horse and Sleigh dies.

I attached the Snow Drifts to the bottom front of the box with Liquid Glue.

I attached the image on top of the Snow Drifts with Mini Dimensionals and Dimensionals.

I added 3 Red Festive Pearls to the Horses's Harness and for the final touch I added 3 Adhesive Backed Snowflakes above the image.

You can watch get your Stampin' Up! Supplies with Me here.

Supplies:

Horse & Sleigh stamp set and dies Bundle

One Horse Open Sleigh Designer Series Paper

Cherry Cobbler Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

Festive Pearls

Snowflake Assortment

Simply Scored

Take Your Pick Tool

Liquid Glue

Dimensionals

Mini Dimensionals

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Treat Box.

See you next time!

Love and Hugs,

 Cathryn

TRUCKING ALONG CHRISTMAS TREAT BOX with LET'S GO FISHING - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Christmas Treat Box that measures  3 1/2  x  2 1/2  x  1 1/4".  I used the Trucking Along stamp set & the Trucking Along Builder Punch Bundle, Stylish Shapes dies and Let's Go Fishing Designer Series Paper.

You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized

10 3/4  x  5"

I scored the  10 3/4" side at:

1 1/4,  4 3/4,  6  and  9 1/2".

I scored the  5" side at:

1 1/4  and  3 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Let's Go Fishing Designer Series Paper to the box.

(2)  3 1/4  x  2 1/4"  top and inside top

(2)  1 x  3 1/4"  long sides

(2)  1  x  2 1/4"  short sides

I attached the DSP to the box with Liquid Glue.

I stamped the Truck, from Tucking Along stamp set, onto Very Vanilla Cardstock with Real Red Ink.

I stamped the outline of the Truck with Cherry Cobbler Ink.

I stamped the "Farm Fresh" on the Door with Tuxedo Black Ink and I stamped the Tree with Old Olive Ink.

I cut the Truck out with the Trucking Along Builder Punch.

I cut the Tree out by hand.

I stamped the sentiment onto Very Vanilla Cardstock with Old Olive Ink.

I cut the sentiment out using a label die from the Stylish Shapes dies.

I tied Real Red Dotted Ribbon around the left short side of the box and tied a bow at the top.

I attached the tree to the back of the truck with Liquid Glue.

I attached the sentiment label first, then the Truck with Dimensionals and Mini Dimensionals.

For the final touch I added 3 Gold Festive Pearls to the Christmas Tree.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Trucking Along stamp set & Trucking Along Builder Punch Bundle

Stylish Shapes dies

Let's Go Fishing Designer Series Paper

Real Red Cardstock

Very Vanilla Cardstock

Real Red Ink

Cherry Cobbler Ink

Old Olive Ink

Tuxedo Black Ink

Real Red Dotted Ribbon

Festive Pearls

Simply Scored

Take Your Pick Tool

Liquid Glue

Dimensionals

Mini Dimensionals

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Christmas Treat Box.

See you next time!

Love and Hugs,

Cathryn

MASCULINE GOODY BOX with GONE FISHING - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Masculine Treat Box.  It measures  4 x 3 x 1".  I used the Gone Fishing stamp set & dies Bundle, Something Fancy dies and Let's Go Fishing Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a piece of Very Vanilla Cardstock sized

11  x  6 1/2"

I scored the  11" side at:

1,  5,  6  and  10".

I scored the  6 1/2" side at:

3/4,  1 3/4,  4 3/4  and  5 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring, cutting and rounding the corners of the flaps.

I attached several pieces of Let's Go Fishing Designer Series Paper to the box.

(2)  2 3/4  x  3 3/4"  front and back of flap

(2)  3 3/4  x  3/4"  long sides

(2)  2 3/4  x  3/4"  short sides

(2)  1/2  x  3 3/4"  inside flaps

I attached the DSP to the box with Liquid Glue.

I attached a 3/8" Low Profile Adhesive Backed Velcro Dot to the front flap for the closure.

I stamped 3 of the Lures, from Gone Fishing stamp set, onto Very Vanilla Cardstock with Mossy Meadow and Crumb Cake Inks.

I cut the images out using the Gone Fishing dies.

I stamped the sentiment onto Very Vanilla Cardstock with Mossy Meadow Ink.

I cut the sentiment out with the second largest square die from Something Fancy dies.

I cut a larger of the same shape die from Mossy Meadow Cardstock.

I attached them together with Liquid Glue.

I attached the entire piece to the front of the box with Dimensionals.

I attached the Lures to the upper right and lower left of the sentiment with Mini Dimensionals and Liquid Glue.

For the final touch I tied a knot to make a top loop in a small piece of Linen Thread and attached the knot to the top Lure with Liquid Glue.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Gone Fishing stamp set & dies Bundle

Let's Go Fishing Designer Series Paper

Something Fancy dies

Very Vanilla Cardstock

Mossy Meadow Ink

Crumb Cake Ink

Linen Thread

Simply Scored

Mini Dimensionals

Dimensionals

3/8" Low Profile Adhesive Velcro Dots

Corner Rounder

Grinds Coffee Pods

Thank you for visiting my Blog today.  I hope you enjoyed my Masculine Treat Box.

See you next time!

Love and Hugs,

Cathryn

EMBROIDERY HOOP GIFT BOX with CRAFTING WITH YOU - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project is an Embroidery Hoop gift box that measures  3 1/2  x  3 1/2  x  1 1/4".  I used the Crafting with You stamp set & dies Bundle, Stylish Shapes dies, Mini Pocket Envelope dies, and Delightfully Eclectic Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a piece of Bubble Bath Cardstock sized

10  x  6 3/4"

I scored the  10" side at:

1/2,  4,  5 1/4  and  8 3/4".

I scored the  6 3/4" side at:

1 1/4,  4 3/4  and  6".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring, cutting and rounding the corners of the top flap.

I attached several pieces of Delightfully Eclectic Designer Series Paper to the box.

(2)  3 1/4  x  3 1/4"  front and back

(4)  1  x  3 1/4"  sides

I attached the DSP to the box with Liquid Glue.

I cut a 2 1/2" Circle from Bubble Bath Cardstock using the Stylish Shapes dies.

I cut the Embroidery Hoop pieces from Basic White Cardstock with the Crafting with You dies.

I stamped the Flowers, from Crafting with You stamp set, onto Basic White Cardstock with Bubble Bath Ink.

I cut the image out using the Crafting with You dies.

I attached the 2 Hoop pieces onto the Bubble Bath Circle with Liquid Glue.

I attached the Flowers to the middle with Dimensionals.

I attached the entire piece to the front of the box with Dimensionals.

I stamped the sentiment onto Basic Black Cardstock with Versamark Ink.

I sprinkled the image with White Stampin' Emboss Powder.

I heated the image up with the Heat Gun.

I cut the image out with a small oval die from the Mini Pocket Envelope dies.

I attached the Oval to the bottom right side of the box.

I tied a bow with Black & White Gingham Ribbon and attached it at the top of the Hoop with a Glue Dot and Liquid Glue.

For the final touch I added 3 Black Classic Matte Dots to the Flowers.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Crafting with You stamp set & dies Bundle

Stylish Shapes dies

Mini Pocket Envelope dies

Delightfully Eclectic Designer Series Paper

Bubble Bath Cardstock

Basic Black Cardstock

Bubble Bath Ink

Versamark Ink

White Stampin' Emboss Powder

Black & White Gingham Ribbon

Classic Matte Dots

Simply Scored

Take Your Pick Tool

Tear & Tape

Liquid Glue

Dimensionals

Heat Gun

Small Circle Punch

Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Box today.

See you next time!

Love and Hugs,

Cathryn

CHEERFUL DAISIES BANDED BOX with DELIGHTFULLY ECLECTIC - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a banded box that measures  4 1/2  x  3 1/2  x  1 1/4".  I used the Cheerful Daisies stamp set & dies Bundle, Delightfully Eclectic Designer Series Paper and Iridescent Rhinestone Basic Jewels.
You can watch My Video Tutorial Here!

I started with a piece of Thick Basic White Cardstock sized

10  x  7 3/4"

I scored the  10" side at:

1 1/4,  4 3/4,  6  and  9 1/2".

I scored the  7 3/4" side at:

1 1/4,  5 3/4  and  7".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring, cutting and rounding the corners of the top flap.

I cut a piece of Delightfully Eclectic Designer Series Paper to

(1)  3 1/2  x  12"

You can adjust the height to 4"  if you like the DSP to cover more of the box.

I creased the DSP around the box with my fingers and attached the front first, then the sides and overlapped the back with Liquid Glue.

I stamped the outlines of the 2 Daisies, from Cheerful Daisies stamp set, onto Basic White Cardstock with Daffodil Delight Ink.

I stamped the centers with Daffodil Delight also.

I stamped 3 Leaves with Old Olive Ink.

I cut the images out using the Cheerful Daisies dies.

I cut the Label from Basic White Cardstock using the Cheerful Daisies dies.

I stamped the sentiment, from Cheerful Daisies stamp set, onto the label with Old Olive Ink.

I attached the Large Daisy first with Dimensionals.

Then I attached the Label with Dimensionals and Liquid Glue.  Next I attached the Small Daisy with Dimensionals and finally the Leaves with Liquid Glue.

For the final touch I added Iridescent Rhinestone Basic Jewels to the side of the Daisy Centers and the bottom right of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Cheerful Daisies stamp set & dies Bundle

Delightfully Eclectic Designer Series Paper

Thick Basic White Cardstock

Basic White Cardstock

Daffodil Delight Ink

Old Olive Ink

Iridescent Rhinestone Basic Jewels

Simply Scored

Take Your Pick Tool

Tear & Tape

Liquid Glue

Dimensionals

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Daisy Box.

See you next time!

Love and Hugs,

Cathryn