Wednesday, August 30, 2023

PICK OF THE PATCH HALLOWEEN BOX with RADIATING STITCHES DIES - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Halloween Box that measures  3  x  4 1/2  x  1".  I used the Pick of the Patch stamp set and Punch Bundle, Radiating Stitches dies, Them Bones Designer Series Paper and Black & White Gingham Ribbon.

You can watch my Video Tutorial Here!


I started with a piece of Pumpkin Pie Cardstock sized
9  x  8 1/2"
I scored the  9" side at:
1,  4,  5  and  8".
I scored the  8 1/2" side at:
1,  2,  6  1/2  and  7 1/2".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring, cutting and rounding the corners of the flaps.


I attached 5 pieces of Them Bones Designer Series Paper to the box.
(1)  2 3/4  x  4 1/4"  top
(2)  4 1/4  x  3/4"  long sides
(2)  2 3/4  x  3/4"  short sides
I attached the DSP to the box with Liquid Glue.


I cut a 2  x  3 3/8" Rectangle from Gorgeous Grape Cardstock using the Radiating Stitches dies.
I stamped the Tree, from Pick of the Patch stamp set, onto the right side of the Rectangle with Pecan Pie Ink.


I stamped the Pumpkin and 2 Leaves with Pumpkin Pie Ink.
I stamped the Pumpkin's Face with Tuxedo Black Ink.
I stamped 2 Leaves with Crushed Curry Ink and 2 Leaves with Garden Green Ink.
I cut all the images out using the Pick of the Patch Punch.


I attached the Pumpkin to the bottom of the Rectangle with Dimensionals.
I added 3 Leaves to the Tree and 3 under the Pumpkin with Liquid Glue.


I wound Black & White Gingham Ribbon around the short side of the box and tied a bow on the right side.
I attached the decorated Rectangle to the top of the box, over the ribbon, with Dimensionals.


For the final touch I added Seasonal Sequins to 3 of the Leaves.



Supplies:
Pick of the Patch stamp set & Punch Bundle
Radiating Stitches dies
Them Bones Designer Series Paper
Pumpkin Pie Cardstock
Gorgeous Grape Cardstock
Basic White Cardstock
Pecan Pie Ink
Pumpkin Pie Ink
Garden Green Ink
Crushed Curry Ink
Tuxedo Black Ink
Black & White Gingham Ribbon
Seasonal Sequins  (Retired)
Simply Scored
Take Your Pick Tool
Liquid Glue
Dimensionals
Corner Rounder
Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.
See you next time!

Love and Hugs,
Cathryn

Tuesday, August 29, 2023

PICK OF THE PATCH LOLLIPOP TREAT BOX with THEM BONES - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Lollipop Treat Box that measures  5 1/4  x  2 1/2  x  1".  I used the Pick of the Patch stamp set and Punch Bundle, Nested Essentials dies and Them Bones Designer Series Paper.

You can watch my Video Tutorial Here!


I started with a piece of Basic Black Cardstock sized
8  x  7 1/2"
I scored the  8" side at:
1,  6 1/4  and  7 1/4".
I scored the  7 1/2" side at:
1,  3 1/2,  4 1/2  and  7".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring, cutting and rounding the corners of the top flap.


I attached 6 pieces of Them Bones Designer Series Paper to the box.
(2)  5  x  2 1/4"  front and back
(2)  5  x  3/4"  long sides
(2)  2 1/4  x  3/4"  short sides
I attached the DSP to the box with Liquid Glue.


I stamped one of the Large Pumpkins and 2 of the Medium Pumpkins, from Pick of the Patch stamp set, onto Basic White Cardstock with Pumpkin Pie Ink.
I stamped 3 of the Stems and 1 Leaf with Garden Green Ink.
I stamped the Face on the 3 Pumpkins with Tuxedo Black Ink.
I cut the images out using the Pick of the Patch Punch.


I cut a 3 7/8  x  1 3/4"  Label from Basic Black Cardstock using the Nested Essentials dies.
I attached the die cut to the top of the box with Dimensionals.


I attached Stems to the back of each Pumpkin and the Leaf to the Large Pumpkin with Liquid Glue.
I attached the largest Pumpkin to the middle of the Label with Dimensionals.
I attached the small Pumpkins on the sides with Liquid Glue.


For the final touch I added 3 Garden Green Seasonal Sequins to the front of the box.
The Seasonal Sequins are now retired so you can use Iridescent Rhinestone Basic Jewels instead.



Supplies:
Pick of the Patch stamp set & Punch Bundle - Available September 6
Nested Essentials dies
Them Bones Designer Series Paper - Available September 6
Basic Black Cardstock
Basic White Cardstock
Pumpkin Pie Ink
Garden Green Ink
Tuxedo Black Ink
Seasonal Sequins (Retired)
Simply Scored
Take Your Pick Tool
Tear & Tape
Liquid Glue
Dimensionals
Corner Rounder
1" Circle Punch

Thank you for visiting my Bog today.  I hope you enjoyed my Treat Box.
See you next time!

Love and Hugs,
Cathryn

Friday, August 18, 2023

SKELETON TREAT BOX with BAG OF BONES - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Large Skeleton Treat Box that measures  3 1/2  x  5 3/4  x  1 1/2".  I used the Bag of Bones stamp set & dies Bundle, Delightfully Eclectic Designer Series Paper, Them Bones Designer Series Paper and Night of Navy Glittered Ribbon.

You can watch my Video Tutorial Here!


I started with a piece of Pumpkin Pie Cardstock sized
10 1/2  x  7 1/2"
I scored the  10 1/2" side at:
1/2,  4,  5 1/2  and  9".
I scored the  7 1/2" side at:
1 1/2,  5 1/2  and  6 3/4".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring, cutting and rounding the corners of the top flaps.


I attached several pieces of Delightfully Eclectic Designer Series Paper to the box.
(2)  3 1/4  x  3 3/4"  front and back
(2)  1 1/4  x  3 3/4"  long sides
(1)  1 1/4  x  3 3/4"  bottom
(2)  1  x  3 1/4"  under the top flaps on front and back
I attached the DSP to the box with Liquid Glue.


I stamped the Skeleton, from Bag of Bones stamp set, onto Basic Black Cardstock with Versamark Ink.
I sprinkled White Stampin' Emboss Powder onto the image and heated it up with my Heat Tool.
I cut the Skeleton out using the Bag of Bones dies.


I cut several pieces out using the Bag of Bones dies.
Crypt  -  Smokey Slate Cardstock
Inner Tombstone  -  Them Bones Designer Series Paper
Fence and 2 sets of Bats  -  Basic Black Cardstock
Bones  -  Basic White Cardstock


I attached the Fence to the bottom right of the box with Liquid Glue.
Next I cut a 1 3/4" Moon from Daffodil Delight Cardstock using a circle punch.
I attached the Moon to the upper right of the box with Liquid Glue.
I attached 2 Bones to the right side of the Fence, for Gate Latches, with Liquid Glue.


I attached the Tombstone to the Crypt with Liquid Glue and attached it to the box with Dimensionals.
I attached the Skeleton on top of the Crypt with Mini Dimensionals and cut up Dimensionals.
I attached 3 Bats onto the Moon and 2 on the upper front of the box with Liquid Glue.


I punched two holes in the tops of the box with a 1/4" hole punch.
I ran Night of Navy Glittered Ribbon through the holes and tied a bow at the front.
For the final touch I added Wink of Stella Glitter to the Fence and Bats.



Supplies:
Bag of Bones stamp set & dies Bundle  -  Available Sept 6
Delightfully Eclectic Designer Series Paper
Them Bones Designer Series Paper. -  Available Sept 6
1 3/4" Circle Punch
Pumpkin Pie Cardstock
Basic Black Cardstock
Daffodil Delight Cardstock
Smokey Slate Cardstock
Versamark Ink
Basics Embossing Powders
Night of Navy & Gold Glittered Ribbon
Wink of Stella
Heat Tool
Simply Scored
Take Your Pick Tool
Tear & Tape
Liquid Glue
Mini Dimensionals
Dimensionals
Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Skeleton Treat Box.
See you next time!

Love and Hugs,
Cathryn

Wednesday, August 16, 2023

FRANKENSTEIN TREAT BOX with TRICKS & TREATS - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Frankenstein Treat Box that measures  2 3/4  x  2 3/4  x  1".  I used the Tricks & Treats stamp set & dies Bundle, Nested Essentials dies, Them Bones Designer Series Paper and Speckled Dots.  You can get 2 of these boxes from one sheet of Cardstock.

You can watch my Video Tutorial Here!


I started with a piece of Granny Apple Green Cardstock sized
8  x  4 3/4"
I scored the 8" side at:
1,  3 3/4,  4 3/4  and  7 1/2".
I scored the  4 3/4" side at:
1  and  3 3/4".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring, cutting and rounding the corner of one of the flaps.


I attached 6 pieces of Them Bones Designer Series Paper to the box.
(2)  2 1/2  x  2 1/2"  front and back
(4)  3/4  x  2 1/2"  sides
I attached the DSP to the box with Liquid Glue.


I cut a label from Gorgeous Grape Cardstock using the Nested Essential dies.
I lined up the center on my Simply Scored and made a scoreline exactly down the middle of the long side of the Label.
I placed the label on the top of the box with the scoreline on the front edge and creased the label along the back edge.
I attached the Label to the top and back of the box with Liquid Glue.
I added a 3/8" Low Profile Velcro Dot to the front of the flap (label) for the Closure.


I stamped the outline of Frankenstein's Face, from the Tricks & Treats stamp set, onto Basic White Cardstock with Granny Apple Green Ink.
I stamped the Hair & Face with Tuxedo Black Ink.
I cut the image out using the Tricks & Treats dies.


I ran Black & White Gingham Ribbon under. the top of the box and tied a bow.
I attached Frankenstein to the front of the box with Dimensionals.


For the final touch I added 3 Mossy Meadow Speckled Dots to Frankenstein's Hair.



Supplies:
Tricks & Treats stamp set and dies Bundle  -  Available September 6
Nested Essentials dies
Them Bones Designer Series Paper  -  Available September 6
Granny Apple Green Cardstock
Gorgeous Grape Cardstock
Basic White Cardstock
Granny Apple Green Ink
Tuxedo Black Ink
Black & White Gingham Ribbon
Speckled Dots
Simply Scored
Take Your Pick Tool
Tear & Tape
Liquid Glue
Dimensionals
Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Frankenstein Box.
See you next time!

Love and Hugs,
Cathryn

Tuesday, August 15, 2023

TRICKS & TREATS DIES TREAT BOX with DECKLED CIRCLES - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Treat Box that I made using the Tricks & Treats Box die.  It measures  3  x  4  x  1 1/8".  I used the Tricks & Treats stamp set & dies Bundle, Deckled Circle dies, Them Bones Designer Series Paper and Night of Navy & Gold Glittered Ribbon.

You can watch my Video Tutorial Here!


I started by cutting 2 of the Box Pieces from Pumpkin Pie Cardstock using the Tricks & Treats dies.
I folded the provided scorelines with my Bone Folder.
I applies Tear & Tape to the skinny rectangle on both pieces and attached them together.
I attached the bottom together with Liquid Glue.


I attached 4 pieces of Them Bones Designer Series Paper to the box.
(2)  2 3/4  x  3 3/4"  front and back
(2)  7/8  x  3 3/4"  long sides
I attached the DSP to the box with Liquid Glue.


I stamped the Haunted House onto Basic White Cardstock with Tuxedo Black Ink.
I stamped the Tombstones onto Basic White Cardstock with Pebbled Path Ink.
I cut a 1 3/4" Circle from Daffodil Delight Cardstock using the Deckled Circle dies.
I stamped the Bats from Tricks & Treats stamp set onto the top of the circle with Tuxedo Black Ink.


I cut out the Haunted House and the Boo (from Granny Apple Green Cardstock) using the Tricks & Treats dies.
I attached the Moon to the top of the box, about 1/8" down from the top of the DSP, with Liquid glue.
I attached the Haunted House next with Mini Dimensionals and Dimensionals.
Then I attached the Boo and Tombstones with Liquid Glue.


I put a few fun sized Treats into a Cellophane Bag and tied the top with Night of Navy & Gold Glittered Ribbon.


Then I inserted the bag into the top of the box.
For the final touch I added 3 Starry Sky 2022-2024 In Color Pearls.



Supplies:
Tricks & Treats stamp set & dies Bundle  -  Available September 6
Deckled Circle dies  -  Available September 6
Them Bones Designer Series Paper  -  Available September 6
Pumpkin Pie Cardstock
Daffodil Delight Cardstock
Granny Apple Green Cardstock
Basic White Cardstock
Tuxedo Black Ink
Pebbled Path Ink
Night of Navy & Gold Glittered Ribbon  -  Available Sept 6
2022-2024 In Color Pearls
6 x 8" Cellophane Bag
Tear & Tape
Liquid Glue
Mini Dimensionals
Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.
See you next time!

Love and Hugs,
Cathryn

Friday, August 11, 2023

LUNCHBOX NOTE TREAT BOX with EVERYDAY THANKS - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Treat Box that measures  3 x 4 x 1 1/4".  I used the Everyday Thanks stamp set, Gorgeously Made dies, Go to Greetings stamp set and Delightfully Eclectic Designer Series Paper.  I put a Rice Krispie Treat inside the box.

You can watch my Video Tutorial Here!


I started with a piece of Daffodil Delight Cardstock sized
9  x  7 1/4"
I scored the  9" side at:
1/2,  3 1/2,  4 3/4  and  7 3/4".
I scored the  7 1/4" side at:
1 1/4,  5 1/4  and  6 1/2".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring, cutting and rounding the corners of the top flap.


I attached several pieces of Delightfully Eclectic Designer Series Paper to the box.
(2)  2 3/4  x  3 3/4"  front and back
(2)  3 3/4  x  3/4"  long sides
(2)  2 3/4  x  3/4"  short sides
I attached the DSP to the box with Liquid Glue.


I cut a piece of Delightfully Eclectic DSP, Notebook Paper Print, to
2 1/4  x  3 1/4".
I cut the top of it with the Notebook die from the Gorgeously Made dies.


I tied Burlap Ribbon around the middle of the box and tied a bow on the left side.
I attached the Notebook Paper over the Ribbon with Dimensionals.


I stamped the Pencil and 3 Hearts, from the middle of the Band Aid, from the Everyday Thanks stamp set onto Basic White Cardstock with Tuxedo Black Ink.
I colored the images with Stampin' Blends.
Dark Daffodil Delight  -  Middle of Pencil
Light Smokey Slate  -  Metal Piece below Eraser
Dark Flirty Flamingo  -  Eraser and Hearts
Dark Crumb Cake  -  Wood
Light Basic Black  -  Tip


I stamped the sentiment, from Go To Greetings stamp set, onto Daffodil Delight Cardstock with Tuxedo Black Ink.
I cut the sentiment out by hand and attached it to the bottom of the Notebook Paper with Liquid Glue.


I attached the Pencil to the Box with Dimensionals.
I attached the Hearts around the Pencil with Liquid Glue.



Supplies:
Everyday Thanks stamp set
Gorgeously Made dies
Go To Greetings stamp set
Delightfully Eclectic Designer Series Paper
Daffodil Delight Cardstock
Basic White Cardstock
Tuxedo Black Ink
Stampin' Blends
Real Red & Burlap Ribbon Combo Pack
Simply Scored
Take Your Pick Tool
Tear & Tape
Liquid Glue
Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my Lunchbox Note Treat Box.
See you next time!

Love & Hugs,
Cathryn

Wednesday, August 9, 2023

CONSTRUCTION ZONE LEGO FIGURES GIFT BOX with NESTED ESSENTIALS - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a gift/treat box for 3 "Lego" Figures.  It measures  3 3/4  x  3  1".  I used the Construction Zone stamp set, Nested Essentials dies, Brights Designer Series Paper and Boho Blue Textured Ribbon.

You can watch my Video Tutorial Here!


I started with a piece of Real Red Cardstock sized
10  x  8"
I scored the  10" side at:
1/2,  4 1/4,  5 1/4  and  9".
I scored the  8" side at:
1,  4  and  5".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached several pieces of Brights Designer Series Paper to the box.
(4)  3 1/2  x  2 3/4"  front & back, front & back of Flap.
(2)  3 1/2  x  3/4  long sides
(2)  2 3/4  x  3/4"  short sides
I attached the DSP top the box with Liquid Glue.


I stamped the Cement Truck and Caution Line onto Basic White Cardstock with Tuxedo Black Ink.
I cut the images out with a  2 5/8  x  1 7/8" rectangle die from the Nested Essentials dies.
I stamped the Construction Worker, Balloons, Cone and Present onto Basic White Cardstock with Tuxedo Black Ink.
I fussy cut the images out by hand.


I colored the images with Stampin' Blends
Dark Real Red  -  Cement Mixer, Balloon, top of present
Dark Daffodil Delight  -  Cab, Balloon, Hat and Bar
Dark Boho Blue  -  Wheels, Pants, Balloons and Bottom of Present
Dark Shaded Spruce  -  Middle of Wheels, Arms and Balloon
Dark Pumpkin Pie  -  Vest, Balloon and Cone


I added 2 3/8" Low Profile Adhesive Velcro Dots to the box for the closure.
I wound Boho Blue Textured Ribbon around the flap and tied a bow on the right side of the front of the flap.
I attached the Truck Rectangle onto the front of the box with Dimensionals.
I attached the Construction Worker and Balloons to the right side with Dimensionals and Liquid Glue.



I stamped the sentiment onto Basic White Cardstock with Boho Blue Ink.
I cut the sentiment out using a smaller rectangle die from the Nested Essentials dies.
I attached the Sentiment, Present and Cone inside the Flap with Liquid Glue.


For the final touch I added 3 Boho Blue Solid Gems to the lower right side of the box.



Supplies:
Construction Zone stamp set
Nested Essentials dies
Brights Designer Series Paper
Real Red Cardstock
Basic White Cardstock
Tuxedo Black Ink
Boho Blue Ink
Stampin' Blends
Boho Blue Textured Ribbon
Solid Gems
Simply Scored
Take Your Pick Tool
Tear & Tape
Liquid Glue
Dimensionals
3/8" Low Profile Adhesive Backed Velcro Dots

Thank you for visiting my Blog today.  I hope you enjoyed my Box today.
See you next time!

Love and Hugs,
Cathryn