FALL WERTHER;S TREAT BOX using SIMPLY LEAVES BUNDLE - Stampin' Up! *

Shop Stampin' Up! Here

Hi Friends!My project today is a Treat Box for some Werther's Hard Candies.  The box measures  2 1/2  x  3 3/4  x  1 1/4".  I used the Simply Leaves stamp set & Punch Bundle, Everyday Arches dies, 2026-28 In Color Gingham Gallery Designer Series Paper and Bloom Boutique Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Golden Glow Cardstock sized:

8  x  7"

I scored the  8" side at:

1 1/4,  3 3/4,  5  and  7 1/2"

I scored the  7" side at:

1 1/4,  5  and  6 1/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached several pieces of Bloom Boutique Designer Series Paper to the box.

(2)  2 1/4  x  3 1/2"  front and back

(2)  1  x  3 1/2"  long sides

(2)  2 1/4  x  1"  short sides

I stamped the small Gingham Leaf onto Golden Glow Cardstock with Golden Glow Ink.

I stamped the large Leaf onto Peaceful Pine Cardstock with Peaceful Pine Ink.

I cut the large Leaf out using the Simply Leaves Punch and I cut the small Leaf out by hand.

I attached the small Leaf to the Large Leaf with a Dimensional at the top and some Liquid Glue.

I tied a bow with Linen Thread and attached it to the base of the Leaves with a Glue Dot.

I tied a bow with Peaceful Pine Bordered Ribbon and attached it over the Linen Thread bow with a Glue Dot and Liquid Glue.

I cut a  2  x  3 1/4" Arch from Gingham Gallery DSP using the Everyday Arches dies.

I attached the Leaves to the Arch with Dimensionals.

I attached the entire piece to the front of the box with Dimensionals.

For the final touch I added 3 2026-2028 In Color Dots to the Arch and large Leaf.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Simply Leaves stamp set & Punch Bundle

Everyday Arches dies

2026-28 In Color Gingham Gallery Designer Series Paper

Bloom Boutique Designer Series Paper

Golden Glow Cardstock

Peaceful Pine Cardstock

Golden Glow Ink

Peaceful Pine Ink

Peaceful Pine Bordered Ribbon

Linen Thread

2026-28 In Color Dots

Tear & Tape

Liquid Glue

Glue Dots

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Fall Treat Box!

See You next time,

Cathryn

CHRISTMAS IN JULY EAST TREAT BOX using WOODLAND WISHES - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box that measures  3 1/4  x  2 1/2  x  1".  You can get 2 of these boxes from one sheet of Cardstock.  I used the Woodland Wishes stamp set, Perennial Postage dies and A Stitched Season Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized:

6  x  5 1/4"

I scored the  6" side at:

2 1/2  and  3 1/2"

I scored the  5 1/4" side at:

1  and  4 1/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 2 pieces of A Stitched Season DSP to the box.

(2)  3  x  2 1/4"  front and back of box.

I stamped the Polar Bear onto Basic White Cardstock with Tuxedo Black Ink.

I fussy cut the Bear out by hand and colored it with a Light Smokey Slate Stampin' Blend.

I cut a  2 3/8  x  1 1/2"  rectangle form A Stitched Season DSP using the Perennial Postage dies.

I attached the Bear to the rectangle with Dimensionals.

I attached the rectangle to the front of the box with Dimensionals.

I punched a hole in the front and back of the box with a 1/8" Hole Punch.

I ran Real Red Stitched Ribbon through the holes and tied a bow at the top.

For the final touch I added 3 Old Olive Moody Palette Glossy Dots to the front of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Woodland Wishes stamp set

Perennial Postage dies

A Stitched Season Designer Series Paper

Real Red Cardstock

Basic White Cardstock

Tuxedo Balck Ink

Light Smokey Slate Stampin' Blend

Real Red Stitched Ribbon

Moody Palette Glossy Dots

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

1/8" Hole Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Treat Box!

See you next time,

Cathryn

CHRISTMAS IN JULY TREAT BOX using WOODLAND WISHES stamp set - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Christmas treat box that measures  3 1/2  x  4  x  1".  I used the Woodland Wishes stamp set, Stylish Shapes dies and A Stitched Season Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized:

11  x  7"

I scored the  11" side at:

1,  5,  6  and  10"

I scored the  7" side at:

3/4,  1 3/4,  5 1/4  and  6 1/4"

To cut and put the box together you can watch My Video Tutorial here!

I attached 6 pieces of A Stitched Season Designer Series Paper to the box.

(2)  3 1/4  x  3 3/4"  front and back of flap

(2)  3/4  x  3 3/4"  long sides

(2)  3 1/4  x  3/4"  short sides

I cut a 2 3/8" square from Basic White Cardstock using the Stylish Shapes dies.

I stamped the sentiment onto the bottom of the square with Real Red Ink.

I stamped the Reindeer and Hedgehog above the sentiment with Tuxedo Black Ink.

I colored the images with Stampin' Blends.

Light Pecan Pie  -  Reindeer

Light & Dark Crumb Cake  -  Hedgehog

Light Pool Party  -  Shadow around animals

I cut a flag in the bottom of a  1 1/2  x  3 3/4"  piece of A Stitched Season DSP and attached it to the top flap with Liquid Glue.

I cut a  2 1/2" square from Peaceful Pine Cardstock and attached it to the back of the image square with Liquid Glue.

I attached the entire piece to the front of the box with Dimensionals.

I tied a bow with Real Red Stitched Ribbon and attached it to the top of the tag with a Glue Dot and Liquid Glue.

For the final touch I added 3 Peppermints to the upper left of the squares.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Woodland Wishes stamp set

Stylish Shapes dies

A sTitched Season Designer Series Paper

Real Red Cardstock

Peaceful Pine Cardstock

Basic White Cardstock

Tuxedo Black Ink

Real Red Ink

Stampin' Blends

Real Red Stitched Ribbon

Liquid Glue

Glue Dots

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Christmas in July Treat Box!

See you next time,

Cathryn

BEAUTIFUL BELLY BAND TREAT HOLDER using FLOWERING MEADOW BUNDLE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a treat holder with a Belly Band.  The box measures  3  x  4  x  1".  I used the Flowering Meadow stamp set & dies Bundle, 2" Circle Punch and Velvet Meadow Specialty Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Peaceful Pine Cardstock sized:

11  x  7 1/2"

I scored the  11" side at:

3,  4,  7  and  8"

I scored the  7 1/2" side at:

3/4,  1 3/4,  5 3/4  and  6 3/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 4 pieces of Velvet Meadow Specialty Designer Series Paper to the box.

(4)  2 3/4  x  3 3/4"  front and back of flaps

I stamped the large and small Flower groups onto Basic White Cardstock with Bubble Bath Ink.

I stamped the centers with Melon Mambo Ink.

I stamped the 2 types of Greens onto Cloud Cover Cardstock with Peaceful Pine Ink.

I cut the images out using the matching dies.

I cut 4 of the large greenery out of Peaceful Pine Cardstock.

I cut a circle from Cloud Cover Cardstock using the 2" Circle Punch.

I attached the greens and flowers to the circle with Dimensionals and Liquid Glue.

I wrapped a  9 1/2  x  1 3/4" piece of Velvet Meadow DSP around the middle of the box and reinforced the corners with my fingers.

I measures the edges and attached them together, at the ends, with Liquid Glue to make a Belly Band.

I attached the Flowers to the front of the Belly Band with Dimensionals.

I tied a bow with Peaceful Pine Bordered Ribbon and attached it below the flowers, on the circle, with a Glue Dot and Liquid Glue.

For the final touch I added 3 Cloud Cover Sunset Sparkle Sequins around the Flowers.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Flowering Meadow stamp set & dies Bundle

2" Circle Punch

Velvet Meadow Specialty Designer Series Paper

Peaceful Pine Cardstock

Cloud Cover Cardstock

Basic White Cardstock

Bubble Bath Ink

Peaceful Pine Ink

Melon Mambo Ink

Peaceful Pine Bordered Ribbon

Sunset Sparkle Sequins

Liquid Glue

Dimensionals

Glue Dots

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Treat Holder!

See You Next Time,

Cathryn

SIMPLY LEAVES BUNDLE TREAT BOX for Twix Bars - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box for some mini Twix bars.  The box measures  4  x  5  x  1 1/4".  I used the Simply Leaves stamp set & Punch Bundle, Stylish Shapes dies, Sweet Words & Labels dies, Bloom Boutique Designer Series Paper and 2026-2028 In Colors Gingham Gallery Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Hydrangea Hue Cardstock sized:

11  x  6 1/4"

I scored the 11" side at:

1 1/4,  5 1/4,  6 1/2  and  10 1/2"

I scored the  6 1/4" side at:

1 1/4,  4 1/4  and  5 1/2"

To cut and put the box together you can watch My Video Tutorial Here!

I attached 6 pieces of Bloom Boutique Designer Series Paper to the box.

(2)  3 3/4  x  3"  lower front and back

(2)  3 3/4  x  1"  upper front and back

(2)  1  x  3"  sides

I cut 2 Leaves out using the Simply Leaves Punch.

One from Bloom Boutique DSP and one from Gallery Gingham DSP.

I stamped the dotted veins onto the Bloom Boutique Leaf with Hydrangea Hue Ink.

I offset the leaves and secured them together with a Dimensional and Liquid Glue on the stems.

I attached the Leaves to a  2 3/8" Basic White Cardstock Circle cut with the 2 3/8" Circle Punch.

I attached the Basic White Circle to a 2 1/2" Hydrangea Hue circle I cut using the Stylish Shapes dies.

I attached the circle to the left front of the box with Dimensionals.

I stamped the sentiment onto Basic White Cardstock with Tuxedo Black Ink.

I cut the sentiment out using a label from the Sweet Words & Labels dies.

I attached the label to the right side of the box with Liquid Glue and Dimensionals.

I punched 2 sets of holes in the top flaps with a 1/4" Hole Punch.

I ran Hydrangea Hue Bordered Ribbon through the holes and tied a bow at the front.

For the final touch I added 3 White Sunset Sparkle Sequins around the box front.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Simply Leaves stamp set & Punch Bundle

Stylish Shapes dies

Sweet Words & Labels dies

2 3/8" Circle Punch

Bloom Boutique Designer Series Paper

2026-28 In Color Gingham Gallery Designer Series Paper

Hydrangea Hue Cardstock

Basic White Cardstock

Tuxedo Black Ink

Hydrangea Hue Ink

Hydrangea Hue Bordered Ribbon

Sunset Sparkle Sequins

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

1/4" Hole Punch

Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my treat box.

See you next time,

Cathryn

LONG TREAT BOX for KITKATs using SWEET BUGS BUNDLE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box that measures  6 3/4  x  2 1/2  x  1".  I used the Sweet Bugs stamp set and dies Bundle, Flowering Meadow stamp set, Three Banner Punch and Cute as a Bug Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Daffodil Delight Cardstock sized:

7 1/2  x  7 1/4"

I scored the  7 1/2" side at:

1,  3 1/2,  4 1/2  and  7"

I scored the  7 1/4" side at:

1/2,  1 1/4,  6  and  6 3/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached several pieces of Cute as a Bug Designer Series Paper to the box.

(2)  4 1/2  x  2 1/4"  front and back

(2)  4 1/2  x  3/4"  long sides

(4)  2 1/4  x  1/2"  small sides

I stamped the 3 Ants onto Basic White Cardstock with Tuxedo Black Ink.

I cut them out with the matching die and colored them with

Stampin' Blends.

Light and Dark Real Red  -  Ants

Dark Daffodil Delight  -  Bugle and Flag

I cut a  3 1/2  x  1 1/2" rectangle from Cute as a Bug DSP and a  3 5/8  x  1 5/8" rectangle from Daffodil Delight Cardstock.

I attached them together with Liquid Glue.

I attached the Ants to the rectangles with Mini Dimensionals.

I attached the entire piece to the front of the box with Dimensionals.

I stamped the sentiment, from Flowering Meadow stamp set, onto Soft Seafoam Cardstock with Tuxedo Black Ink.

I cut the sentiment out using the middle banner not the Three Banner Punch.

I attached the Banner to the lower right front of the box with Dimensionals.

I punched 2 sets of holes on each flap with a 1/8" Hole Punch.

I ran Linen Thread through the holes and tied a bow on the top.

For the final touch I added 3 Cloud Cover Sunset Sparkle Sequins around the Ants.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Sweet Bugs Bundle

Flowering Meadow stamp set

Three Banner Punch

Cute as a Bug Designer Series Paper

Daffodil Delight Cardstock

Soft Seafoam Cardstock

Tuxedo Black Ink

Stampin' Blends

Linen Thread

Sunset Sparkle Sequins

Tear & Tape

Liquid Glue

Dimensionals

Mini Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

1/8" Hole Punch

Thank you for visiting my Blog.  I hope you enjoyed my treat box today.

See you next time!

Love & Hugs,

Cathryn