Friday, April 26, 2024

FIDGET GADGET TREAT BOX with HEARTS & HUGS - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Treat Box that measures  3  x  3 1/2  x  1".  I used the Hearts & Hugs stamp set & die Bundle, Everyday Details dies and Perennial Lavender Designer Series Paper.

You can watch my Video Tutorial Here!


I started with a piece of Highland Heather Cardstock sized
8 1/2  x  6 1/4"
I scored the  8 1/2" side at:
1,  4,  5  and  8"
I scored the  6 1/4" side at:
1,  4 1/2  and  5 1/2"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached several pieces of Perennial Lavender Designer Series Paper to the box.
(2)  2 3/4  x  3 1/4"  front and back
(2)  2 3/4  x  3/4"  short sides
(2)  3/4  x  3 1/4"  long sides
I attached the DSP to the box with Liquid Glue.


I cut a  2 3/8" circle from Basic White Cardstock using the Everyday Details dies.
I used Balmy Blue and Old Olive Inks along with my Large Blending Brushes to color the circle to look like the Sky and Grass.


I cut the Grass & Leaves piece from Old Olive Cardstock and 3 Flowers from Highland Heather Cardstock using the Hearts & Hugs dies.
I split the Grass in half and attached them to either side of the circle (at a slight slant) with Liquid Glue.
I attached the Flowers to the top of the Stems with Liquid Glue.


I stamped the Hamster, from Hearts & Hugs stamp set, onto Basic White Cardstock with Tuxedo Black Ink.
I colored the image with Stampin' Blends.
Bottom of Face, Hands and Feet   -  Light Crumb Cake
Cheeks, Nose and inner Ears  -  Light Bubble Bath
Body and Upper Face  -  Dark Crumb Cake
I cut the image out using the Hearts & Hugs stamp set.


I attached the Hamster onto the Circle with Dimensionals.
I attached the entire piece to the upper front of the Box with Dimensionals.


I cut the label out of Basic White Cardstock using the Hearts & Hugs dies.
I scored the label on each side next to the sentiment and about 1/8" over to make it shorter.
I stamped the sentiment onto the middle part of the label with Gorgeous Grape Ink.
I attached the label under the circle with a Dimensional in the middle and Liquid Glue on the edges.


I tied Glittered Organdy Ribbon around the top flap and tied a bow on the top of it.
I added 3 Lemon Lime Tinsel Gems to the middle of the Flowers for the final touch.



Supplies:
Hearts & Hugs stamp set & dies Bundle
Everyday Details dies
Perennial Lavender Designer Series Paper
Highland Heather Cardstock
Old Olive Cardstock
Basic White Cardstock
Tuxedo Black Ink
Balmy Blue Ink
Old Olive Ink
Tuxedo Black Ink
Stampin' Blends
Tinsel Gems 4 Pack
Glittered Organdy Ribbon
Simply Scored
Take Your Pick Tool
Silicone Mat
Large Blending Brushes
Small Circle Punch
Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Treat Box.
See you next time!

Love & Hugs,
Cathryn

Wednesday, April 24, 2024

LITTLE DEBBIE BIRTHDAY CREME PIE TREAT BOX with FLOWERS of BEAUTY - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a treat box for a Little Debbie Cake.  It measures  3 1/4  x  3 1/4  x  1 1/4".  I used the Flowers of Beauty stamp set & dies Bundle, Unbounded Love stamp set & dies Bundle and Bright & Beautiful Designer Series Paper.

You can watch my Video Tutorial Here!


I started with a piece Bubble Bath Cardstock sized
9 1/2  x  6 1/2"
I scored  the 9 1/2" side at:
1 1/4,  4 1/2,  5 3/4  and  9"
I scored the  6 1/2" side at:
1 1/4,  4 1/2  and  5 3/4"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I added several pieces of Bright & Beautiful Designer Series Paper.
(2)  3 x 3"  front and back
(4)  1 x 3"  sides
I attached the DSP with Liquid Glue.


I cut the large piece of flowers from Basic White Cardstock using the Flowers of Beauty die set.
I cut several of the 2 sizes of flowers from Bubble Bath Cardstock using the same dies set.
I attached the White piece with Liquid Glue on some of the Branches.
I attached 2 Large Flowers and 3 small ones around the box using a Silicone Mat, Take Your Pick Tool and Liquid Glue.


I cut a 2 1/8  x  1 1/2" label from Basic White Cardstock using the Unbounded Love dies.
I stamped the sentiment onto the middle of the label with Bubble Bath Ink.


I attached the label onto the middle of the box, over the Branches, with Dimensionals.
I tied a bow with Bubble Bath Sheer Ribbon and attached it to the lower right of the label with Dimensionals and Liquid Glue.



I added Rhinestone Basic Jewels to the upper left of the box and to the middle of all the Flowers for the final touch.



Supplies:
Flowers of Beauty stamp set & dies Bundle
Unbounded Love stamp set & dies Bundle
Bright & Beautiful Designer Series Paper
Bubble Bath Cardstock
Basic White Cardstock
Bubble Bath Ink
Sheer Ribbon Combo Pack
Rhinestone Basic Jewels
Liquid Glue
Dimensionals
Simple Scored
Take Your Pick Tool
Silicone Mat
Tear & Tape
Liquid Glue
Dimensionals
Mini Dimensional

Thank you for visiting my Blog today.  I hope you enjoyed my project today.
See you next time!

Love and Hugs,
Cathryn

Tuesday, April 23, 2024

COUNTRY BIRDHOUSE LONG GIFT BOX with UNBOUNDED LOVE DIES - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a long box that measures  3 3/4  x  6  x  1".  I used the  Country Birdhouse stamp set & dies Bundle, Unbounded Love dies and Country Roads Deigner Series Paper.  I put some see through Sticky Note Clouds and 2 Fancy Pens inside.

You can watch my Video Tutorial Here!


I started with a piece of Pretty Peacock Cardstock sized
10  x  8 1/2"
I scored the  10" side at:
1/2,  4 1/4,  5 1/4  and  9"
I scored the  8 1/2" side at:
1,  7  and  8"
To put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached several pieces of Country Woods Designer Series Paper.
(2)  3 1/2  x  5 3/4"  front and back
(2)  3 1/2  x  3/4"  short sides
(2)  3/4  x  5 3/4"  long sides
I attached the DSP to the box with Liquid Glue.


I cut several pieces of the Birdhouse out using the Country Birdhouse dies.
Birdhouse and Small Top Strip and Bottom Pole  -  Pretty Peacock Cardstock
Birdhouse Top and Bottom  -  Lost Lagoon Cardstock
Scallop Piece  -  Basic White Cardstock
Leaves  -  Old Olive Cardstock
I cut the Hole "Opening" with a 7/8" circle die from the Stylish Shapes dies.
I put the pieces all together with Liquid Glue.


I stamped 2 of the Large Flower Arrangement, 2 Small Flowers and I Standing Flower, from Country Birdhouse stamp set, onto Basic White Cardstock with Tuxedo Black Ink.
I cut them out using the Country Birdhouse dies.  I cut the large Flower and Leaves from the second Arrangement out by hand.


I colored the images with Stampin' Blends.
Bird  -  Light & Dark Lemon Lolly
Beak  -  Daffodil Delight
Feet  -  Light Smokey Slate
Flowers  -  Light & Dark Bubble Bath
Leaves  -  Light Old Olive


I attached the bottom Pole to the box first 1/8" above the bottom of the DSP with Liquid Glue.
Next I attached the Birdhouse with Dimensionals.
I attached the Flowers to the Birdhouse with Liquid Glue and the Bird with Dimensionals.


I cut a label from Basic White Cardstock using the Unbounded Love dies.
I stamped the sentiment, from Country Birdhouse stamp set, onto the label with Pretty Peacock Ink.
I attached the label to the box with Liquid Glue.


I wound Lost Lagoon Bordered Ribbon around the top flap and tied a bow on the top.
I added 3 Pretty Peacock Blooming Pearls to the box for the final touch.



Supplies:
Country Birdhouse stamp set & dies Bundle
Unbounded Love dies
Stylish Shapes dies
Country Woods Designer Series Paper
Pretty Peacock Cardstock
Lost Lagoon Cardstock
Basic Grey Cardstock
Basic White Cardstock
Tuxedo Black Ink
Pretty Peacock Ink
Stampin' Blends
Lost Lagoon Bordered Ribbon
Blooming Pearls
Simply Scored
Take Your Pick Tool
Silicone Mat
Corner Rounder
Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my project today.
See you next time!

Love and Hugs,
Cathryn

Friday, April 19, 2024

ANNUAL CATALOG GIFT BOX with COUNTRY FLOWERS - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a gift Box that measures  2 3/4  x  5  x  1".  I used the Country Flowers stamp set & dies Bundle, available May 1st, Country Woods Designer Series Paper, Stampin' Blends and the Sheer Ribbon Combo Pack.

You can watch my Video Tutorial Here!



I started with a piece of Boho Blue Cardstock sized
8  x  7 3/4"
I scored the  8" side at:
1/2,  3 1/4,  4 1/4  and  7"
I scored the  7 3/4" side at:
1,  6  and  7"
To cut an put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Carcdstock should look after scoring and cutting.


I attached several pieces of Country Woods Designer Series Paper to the box.
(2)  2 1/2  x  4 3/4"  front and back
(2)  2 1/2  x  3/4"  short sides
(2)  3/4  x  4 3/4"  long sides
I attached the DSP to the box with Liquid Glue.


I stamped the Bucket, Stool and Flowers onto Basic White Cardstock with Tuxedo Black Ink.
I cut the images out using the Country Flowers dies.


I colored the images with Stampin' Blends.
Stool
Light & Dark Boho Blue
Bucket
Light & Dark Smokey Slate
Flowers
Light & Dark Boho Blue
Light & Dark Lemon Lolly
Light & Dark Old Olive


I attached the Flowers to the Bucket first and then the Bucket to the Stool next with Liquid Glue.
I attached the entire piece to the front of the box with Dimensionals.


I tied Lemon Lolly Sheer Ribbon around the top flap and tied a bow on the top.
For the final touch I added 3 Lemon Lolly Solid Gems around the front of the box.



Supplies:
Country Flowers stamp set & dies Bundle - Available May 1st
Country Woods Designer Series Paper  -  Available May 1st
Boho Blue Cardstock
Basic White Cardstock
Tuxedo Black Ink
Stampin' Blends
Sheer Ribbon Combo Pack
Solid Gems
Tear & Tape
Liquid Glue
Dimensionals
Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Gift box.
See you next time!

Love and Hugs,
Cathryn

Wednesday, April 17, 2024

INTERATIVE TREAT BOX with ATTENTION SHOPPERS BUNDLE - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is an interactive Treat Box that measures  3 1/2  x  3 1/2  x  1".  I used a new Bundle, Available May 1st, called Attention Shoppers.  I also used the Stylish Shapes dies and Bright & Beautiful Designer Series Paper.

You can watch my Video Tutorial Here!


I started with a piece of Lemon Lolly Cardstock sized
9 1/2  x  8 1/2"
I scored the  9 1/2" side at:
1/2,  4,  5  and  8 1/2"
I scored the  8 1/2" side at:
1,  4 1/2  and  5 1/2"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached several pieces of Bright & Beautiful Designer Series Paper to the box.
(2)  3 1/4  x  3 1/4"  front and back
(2)  3 1/4  x  2 3/4"  front and back of back flap
(4)  3 1/4  x  3 1/4"  sides
I attached the DSP to the box with Liquid Glue.


I cut the two pieces of the Shopping Cart from Smokey Slate Cardstock using the Attention Shoppers dies.
I Glued the top to the bottom with Liquid Glue.
I cut a 3" circle from Bright & Beautiful DSP using the Stylish Shapes dies.
I attached the shopper cart to the circle with Liquid Glue ATTACHING ONLY THE BOTTOM AND SIDES LEAVING THE BODY AND TOP OF THE CART LOOSE.


I stamped the Bottle, Flowers and Gift Bag, from Attention Shoppers stamp set, onto Basic White Cardstock with Tuxedo Black Ink.
I colored the images with Stampin' Blends.
Bottle:
Light Boho Blue, Light Old Olive, Dark Night of Navy and Dark Crumb Cake
Gift Bag:
Light Bubble Bath and Light Smokey Slate
Flowers:
Light Boho Blue, Dark Bubble Bath, Dark Granny Apple Green
I cut the images out using the Attention Shoppers dies.


I tied Lemon Lolly Sheer Ribbon around the side of the box and tied a bow on the left side.
I attached the 3" circle to the front of the box, over the ribbon, with Dimensionals.


I cut a 1 1/2" square from Basic White Cardstock using the Stylish Shapes dies.
I stamped the sentiment, "just for you", onto the square with Boho Blue Ink.
I attached the square inside the cart, almost to the top of the box, with Liquid Glue.


I slipped the 3 items inside the Cart where is was not glued on.
The recipient can take the items in and out and move them around.
For the final touch I added 3 Blue Rainbow Dots around the box.



Supplies:
Attention Shoppers stamp set & dies Bundle  -  Available May 1st
Stylish Shapes dies
Bright & Beautiful Designer Series Paper
Lemon Lolly Cardstock
Basic White Cardstock
Smokey Slate Cardstock
Tuxedo Black Ink
Boho Blue Ink
Stampin' Blends
Sheer Ribbon Combo Pack
Rainbow Dots
Tear & Tape
Liquid Glue
Dimensionals
Corner Rounder

Thank you for visiting my Blog today.   I hope you enjoyed my box.
See you next time!

Love & Hugs,
Cathryn

Tuesday, April 16, 2024

HEARTS & HUGS TREAT BOX with UNBOUNDED LOVE DIES - Stampin' Up!



Hi Friends! 
 My project today is a Treat Box that measures  2 1/4  x  3 1/2  x  1".  I used the Hearts & Hugs stamp set and dies Bundle, Unbounded Love dies and Unbounded Beauty Designer Series Paper.

You can watch my Video Tutorial Here!


I started with a piece of Thick Basic White Cardstock sized
7  x  5 1/2"
I scored the  7" side at:
2 1/4,  3 1/4,  5 1/2  and  6 1/2"
I scored the  5 1/2" side at:
1  and  4 1/2"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached several pieces of Unbounded Beauty Designer Series Paper to the box.
(2)  2  x  3 1/4"  front and back
(2)  3/4  x  3 1/4"  long sides
(2)  2  x  3/4" short sides
I attached the DSP to the box with Liquid Glue.


I stamped the Mouse, from Hearts & Hugs stamp set, onto Basic White Cardstock using Tuxedo Black Ink.
I cut the image out using the matching dies.
I colored the image with Stampin' Blends.
Light & Dark Bubble Bath  -  Heart, Nose and inside Ear.
Light Smokey Slate and a Color Lifter  -  Mouse Body, Tail and Feet


I cut 2 frames using the Unbounded Love dies.
I cut the large one from Thick Basic White Cardstock and the inside frame from Pretty In Pink Cardstock.
I attached the Pink Frames on top of the White die cut with Liquid Glue.


I attached the Mouse to the middle with Dimensionals.
I stamped the sentiment onto Basic White Cardstock using Tuxedo Black Ink.
I cut the sentiment out with a label from the Unbounding Love dies.


I wound Pretty In Pink Bordered Ribbon around the long side of the box and tied a bow on the top to close it.
I attached the sentiment onto the bottom/front, over the Ribbon, with Liquid Glue on either side of the label back.


I attached the Mouse and Ovals above the sentiment, overlapping a little, with Dimensionals.
For the final touch I added 3 Pretty In Pink In Color Shimmer Gems around the front of the box.



Supplies:
Hearts & Hugs stamp set & dies Bundle  -  Available May 1st
Unbounded Love dies  -  Available May 1st
Unbounded Beauty Designer Series Paper  -  Available May 1
Thick Basic White Cardstock
Pretty In Pink Cardstock
Basic White Cardstock
Tuxedo Black Ink
Stampin' Blends
2024-2025 In Color Shimmer Gems
Tear & Tape
Liquid Glue
Dimensionals
Simply Scored
Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Treat Box.
See you next time!

Love and Hugs,
Cathryn