MINI BUBBLE TUBE TREAT BOX using OH MY FRIGHT BUNDLE - Stampin' Up! *

Shop Stampin' Up Here

Hi Friends!My project today is a long treat box for some Mini Bubble Tubes with a little fun sized treat too!  I used the Oh My Fright Bundle, Home for Christmas dies and Frightfully Fun Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Basic Black Cardstock sized:

7 1/2  x  7"

I scored the  7 1/2" side at:

1,  5 1/2  and  6 1/2"

I scored the  7" side at:

1/2,  2 3/4,  3 3/4  and  6"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 7 pieces of Frightfully Fun Designer Series Paper to the box.

(2)  2  x  4 1/4"  front and back

(2)  3/4  x  4 1/4"  long sides

(3)  2  x  3/4"  short sides and front flap

I cut a long Scallop strip from Basic Black Cardstock using the Home for Christmas dies.

I cut three of the Scallops off and attached it under the edge of the front flap with Liquid Glue.

When the Scallop was dry I attached a 3/8" Adhesive Velcro Dot under the flap/front of box for the closure.

I cut the Tree from Basic Black Cardstock and the Moon from Daffodil Delight Cardstock using the Frightfully Fun dies.

I attached the Moon to the left, just underneath the front flap, with Liquid Glue.

I attached the Tree just under the Velcro Dot on the front of the box with Liquid Glue.

I snipped off the excess Tree Trunk hanging off the bottom.

I stamped the sentiment onto a 1/2" high piece of Pumpkin Pie Cardstock with Tuxedo Black Ink.

I slanted the sides next to the ends of the sentiment the same direction.I attached the sentiment over the lower part of the Tree with Liquid Glue.

I wound Timid Tiger Faux Linen Ribbon (retired) under the top flap and tied a bow on the top.

I added 3 Adhesive Ghosts to the Tree and 2 Black Dots to the flap.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Oh My Fright stamp set & dies bundle

Home for Christmas dies

Frightfully Fun Designer Series Paper

Basic Black Cardstock

Daffodil Delight Cardstock

Pumpkin Pie Cardstock

Tuxedo Black Ink

Timid Tiger Faux Linen Ribbon (retired)

Adhesive Bats, Ghosts and Dots

Tear & Tape

Liquid Glue

Dimensionals

3/8" Adhesive Velcro Dots

Tools:

Simply Scored

Take Your Pick Tool

Thank you for visiting My Blog today.  I hope you enjoyed my Halloween Treat Box.

See you next time!

Hugs,

Cathryn

CHRISTMAS PURSE TREAT BOX using HOME FOR CHRISTMAS BUNDLE - Stampin' Up! *

Shop Stampin' Up! Here

Hi Friends!My project today is a Christmas Purse Treat Box that measures  3 3/4  x  2 3/4  x  1 1/4".  I used the Home For Christmas stamp set & dies Bundle, Three Banner Punch, Christmas Crew stamp set, Scalloped Blooms dies and Stylish Shapes dies.
You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized:

9 1/2  x  6 1/4"

I scored the  9 1/2" side at:

2 3/4,  4,  6 3/4  and  8"

I scored the  6 1/4" side at:

1 1/4  x  5"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 8 pieces of Timeless Christmas Designer Series Paper to the box.

(2)  3 1/2  x  1 1/4"  fornt and back of flap

(2)  3 1/2  x  2 1/2"  front and back

(2)  3 1/2  x  1"  long sides

(2)  1  x  2 1/2"  short sides

I cut a  2 1/4" Scalloped Circle from Thick Basic White Cardstock using the Scalloped Blooms dies.

I cut a  1 3/4" circle from Timeless Christmas DSP using the Stylish Shapes dies.

I attached the circles together with Liquid Glue.

I stamped the Christmas Tree, from Home for Christmas stamp set, onto Basic White Cardstock with Peaceful Pine Ink.

I cut the Tree out using the Matching dies and attached it to the circles with Dimensionals.

I attached the top half of the Scallop Circle to the front flap of the Purse with Liquid Glue.

I attached a set of 3/8" Adhesive Velcro Dots onto the back of the Scallop and front of the box for the closure.

I cut the top label on the Three Label Punch from Basic White Cardstock.

I stamped the sentiment, from Christmas Crew stamp set, onto the label with Real Red Ink.

I punched holes in each side of the box top with a 1/8" Hole Punch.

I strung the sentiment onto a piece of Real Red Stiched Ribbon and put the ends through the holes.

I tied a double knot at the end of each side of the ribbon to make the handle.

I added a Star from the Christmas Epoxy Shapes to the top of the Tree and for the final touch I added. Real Red Sparkle Sequins to the Tree and Sentiment.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Home for Christmas stamp set & dies Bundle

Christmas Crew stamp set

Scalloped Blooms dies

Stylish Shapes dies

Three Banner Punch

Timeless Christmas Designer Series Paper

Real Red Cardstock

Basic White Cardstock

Thick Basic White Cardstock

Peaceful Pine Ink

Real Red Ink

Real Red Stitched Ribbon

Christmas Epoxy Shapes

Sparkle Sequins

3/8" Adhesive Velcro Dots

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

3/8" Hole Punch

Thank you for visiting my Blog.  I hope you enjoyed my Treat Purse.

See you next time!

Hugs,

Cathryn

VAMPIRE KitKat TREAT BOX using WEB of FUN BUNDLE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a box for a Vampire Twix Bar.  The box measures 4 1/4  x  2  x  3/4".  I used the Web of Fun stamp set & dies Bundle and Frightfully Fun Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Pumpkin Pie Cardstock sized:

7  x  6 3/4"

I scored the  7" side at:

3/4,  1 1/2,  3 1/2,  4 1/4  and  6 1/4"

I scored the  6 3/4" side at:

1/2,  1 1/4,  5 1/2  and  6 1/4"

To cut and put the box together you can watch My Video Tutorial Here!

I attached the front piece of DSP onto the box last after I wound Black Iridescent ribbon around the left short side of the box and tied a bow at the top.

I attached several pieces of Frightfully Fun Designer Series Paper to the box.

(3)  4  x  1 3/4"  front and back of flap, back

(2)  4  x  1/2"  long sies

(2)  1/2  x  1 3/4"  short sides

I stamped the Spider onto Basic White Cardstock with Tuxedo Black Ink.

I cut the image out and colored it with a Dark Smokey Slate Stampin' Blend.

I cut the word "HALLOWEEN" out of Basic Black Cardstock and Pumpkin Pie DSP using the Web of Fun dies.

I attached them together, Pumpkin Pie DSP on top, with Liquid Glue.

I slipped the Spider into the H and attached both pieces to the front of the box with Liquid Glue.

I cut the word "Night" out of Granny Apple Green Cardstock using the Web of Fun dies.  I attached it below the end of "HALLOWEEN" with Liquid Glue.

I added some Wink of Stella glitter to the Spider and for the final touch I added 5 Timid Tiger Sunset Sparkle Sequins to the "HALLOWEEN".

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Web of Fun stamp set & dies Bundle

Frightfully Fun Designer Series Paper

Pumpkin Pie Cardstock

Basic Black Cardstock

Basic White Cardstock

Tuxedo Black Ink

Dark Smokey Slate Stampin' Blend

Wink of Stella

Black Iridescent Ribbon

Sunset Sparkle Sequins

Liquid Glue

Tools:

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.

See you next time!

Hugs,

Cathryn

SPOOKY HALLOWEEN TREAT BOX using WEB OF FUN BUNDLE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Halloween treat box that measures  3  x  5 1/2  x  1 1/4".  I used the Web of Fun stamp set & dies Bundle and Frightfully Fun Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Granny Apple Green Cardstock sized:

9  x  7"

I scored the  9" side at:

1 1/4,  4 1/4,  5 1/2  and  8 1/2"

I scored the  7" side at:

1 1/4,  5 1/4  and  6 1/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached several pieces of Frightfully Fun Designer Series Paper to the box.

(2)  2 3/4  x  3 3/4"  front and back

(2)  1  x  3 3/4"  long sides

(1)   2 3/4  x  1"  bottom

(2)  2 3/4  x  3/4"  front and back top

I cut the word "HALLOWEEN" from Gorgeous Grape Cardstock and the Spider Web from White Glitter Paper using the Web of Fun dies.

I cut the Web in half and attached half to the left/front of the box with Liquid Glue.

I cut a  1 3/4  x  3 3/4"  piece of orange Frightfully Fun DSP and attached the HALLOWEEN" onto it with Liquid Glue.

I stamped the Spider onto Basic White Cardstock with Tuxedo Black Ink.

I cut the Spider out and colored it with a Dark Smokey Slate Stampin' Blend.

I cut out the Label from Granny Apple Green Cardstock using the Web of Fun dies.

I stamped the sentiment onto the Label using Tuxedo Black Ink.

I attached the DSP with HALLOWEEN on it to the right side of the box front with Dimensionals.

I attached the Spider to the left side with Dimensionals.

I attached the Label under the Spider with Dimensionals.

I punched 2 sets of holes into the top flaps with a 1/8" Hole Punch.

I ran Timid Tiger Faux Linen Ribbon, now retired, through the holes and tied a bow at the front.

For the final touch I added 3 Black Dots around the front of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Web of Fun stamp set & dies Bundle

Frightfully Fun Designer Series Paper

Granny Apple Green Cardstock

Gorgeous Grape Cardstock

White Glitter Paper (retired)

Basic White Cardstock

Tuxedo Black Ink

Dark Smokey Slate Stampin' Blend

Timid Tiger Faux Linen Ribbon (retired)

Adhesive Bats, Ghosts and Dots

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

1/8" Hole Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Box.

See you next time!

Hugs,

Cathryn

BEAUTIFUL SQUARE TREAT BOX using RADIANT SUNFLOWERS BUNDLE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a square treat box that measures  3 1/2  x  3 1/2  x  1".  I used the Radiant Sunflowers stamp set & dies Bundle, Tile Garden dies and Sunflower Fields Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Cajun Craze Cardstock sized:

9 1/2  x  7 1/2"

I scored the  9 1/2" side at:

1,  4 1/2,  5 1/2  and  9"

I scored the  7 1/2" side at:

1,  4 1/2  and  5 1/2"

To cut and put the box together you can watch My Video Tutorial Here.

I attached several pieces of Sunflower Fields Designer Series Paper to the box.

(2)  3 1/4  x  3 1/4"  front and back

(4)  3 1/4  x  3/4"  sides

(2)  3 1/4  x  1 3/4"  front and back of flap

I stopped the Flower onto Basic White Cardstock with Tuxedo Black Ink.

I cut a  2 3/4" square from Very Vanilla Cardstock using the Tile Garden dies.

I stamped the sentiment to the lower right with Cajun Craze Ink.

I added the Butterfly above the sentiment with Tuxedo Black Ink.

I colored the Flower and Butterfly with Stampin' Blends:

Light & Dark Old Olive  -  Leaf

Light & Dark Golden Glow  -  Flower

Light and Dark Daffodil Delight  -  Butterfly

I cut the Vase from Sunflower Fields Designer Series Paper and attached the Flower to the back with a Dimensional.

I attached the Flower and Vase next to the sentiment and Butterfly with Dimensionals.

I added a 3/8" adhesive Velcro Dot to the back flap for the clousure.

I ran Mossy Meadow Gingham Ribbon under the flap and tied a bow at the top.

I cut another piece of DSP to a  2 3/4" square.

I attached the square to the box with Liquid Glue.

Then I attached the Very Vanilla square not top with Dimensionals.

For the final touch I added 3 Mossy Meadow Moody Palette Glossy Dots onto the Vase and above the Butterfly.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Radiant Sunflowers stamp set & dies Bundle

Tile Garden dies

Sunflower Fields Designer Series Paper

Cajun Craze Cardstock

Very Vanilla Cardstock

Basic White Cardstock

Tuxedo Black Ink

Cajun Craze Ink

Stampin' Blends

Mossy Meadow Gingham Ribbon

3/8" Adhesive Velcro Dots

Wink of Stella

Moody Palette Glossy Dots

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my box.

See you next time!

Hugs,

Cathryn