Friday, August 30, 2024

HALLOWEEN KEY CHAIN TREAT BOX with POTIONS & SPELLS - KIT PROJECT #3 - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a treat box that measures   3 1/4  x  4 3/4  x  1".  I used the Potions & Spells stamp set & dies Bundle, Old Olive Glimmer Paper and Versamark Ink.

You can watch my Video Tutorial Here!


I started with a piece of Basic Black Cardstock sized
9  x  6"
I scored the  9" side at:
1/2,  3 3/4,  4 3/4  and  8"
I scored the  6" side at:
1,  4 1/2  and  5 1/4"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached several pieces of patterned paper to the box.
(2)  3  x  3 1/4"  front and back
(1)  3  x  3/4"  bottom
(2)  3  x  1/2" bottom of top flaps
(2)  3/4  x  3 1/4"  long sides


I cut a Cauldron from Basic Black Cardstock using the Potions & Spells dies.
I stamped the sentiment as far to the bottom and left, of the Cauldron, as I could with Versamark Ink.
I sprinkled White Embossing Powder onto the image and tapped off the excess.
I heated the image up with my Heat Tool to set it.


I cut the Drips and Bubbles from Old Olive Glimmer Paper using the Potions & Spells dies.
I attached the Drips to the top of the Cauldron with Liquid Glue.
I attached the Cauldron to the front of the box with Dimensionals.


I attached 3 of the Bubbles to the front of the box with Dimensionals and Mini Dimensionals.
I punched 2 sets of holes in the top flap with a Hole Punch.
I ran some Green Ribbon through the holes and tied a bow at the front.


For the final touch I added 3 Black Gems to the right side of the Cauldron.



Supplies:
Potions & Spells stamp set and dies Bundle
Basic Black Cardstock
Old Olive Glimmer Paper
Versamark Ink
White Embossing Powder
Ribbon, Gems & Patterned Paper from my Stash
Tear & Tape
Liquid Glue
Dimensionals
Mini Dimensionals
Tools
Simply Scored
Take Your Pick Tool
Corner Rounder
Hole Punch

Thank you for visiting my Blog.  I hope you enjoyed my Halloween Box today.
See you next time!

Love & Hugs,
Cathryn

Wednesday, August 28, 2024

INFLATABLE BAT TREAT BOX with POTIONS & SPELLS - KIT BOX 2 - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Treat Box that measures  3 3/4  x 2 3/4  x  1".  I used the Potions & Spells stamp set & dies Bundle, Perennial Postage dies and Old Olive Glimmer Paper.

You can watch my Video Tutorial Here!


I started with a piece of Basic Black Cardstock sized
10  x  5 1/2"
I scored the  10" side at:
1/2,  4 1/4,  5 1/4  and  9"
I scored the  5 1/2" side at:
1,  3 3/4  and  4 3/4"
To cut and put the box together you can watch my Video Tutorial Here.
Belos is a picture of how your Cardstock should look after scoring and cutting.


I attached several pieces of patterned paper from my stash (Stampin' Up! does not have Halloween Paper this year)
(2)  3 1/2  x  2 1/2"  front and back
(2)  3 1/2  x  3/4"  long sides
(2)  3/4  x  2 1/2"  short sides


I cut 3 of the tall bottles from Pumpkin Pie Cardstock with the Potions & Spells dies.
I cut the 2 of there inside pieces from Black Glimmer Paper and 1 from Old Olive Glimmer Paper.
I attached them together with Liquid Glue.


I cut a  2 3/4  x  2" rectangle from some patterned paper using the Perennial Postage dies.
I stamped the sentiment onto the bottom of the rectangle with Versamark Ink.
I sprinkled the sentiment with White Embossing Powder and Heated it up with my Heat Tool.
I attached the rectangle to a  2 7/8  x  2 1/8" piece of the Old Olive Glimmer Paper with Liquid Glue.


I attached the Bottles, with the Green in the middle, with Dimensionals.
I tied Green Ribbon from my stash around the long side of the box and tied a bow on the left side.


I attached the rectangles to the front of the box with Dimensionals.
For the final touch I added a Black Gem from my stash to the middle bottle.



Supplies:
Potions & Spells stamp set & dies Bundle
Perennial Postage dies
Old Olive Glimmer Paper
Basic Black Cardstock
Pumpkin Pie Cardstock
Versamark Ink
White Embossing Powder
Black Glimmer Paper, Patterned Paper and Ribbon from my stash
Tear & Tape
Liquid Glue
Dimensionals
Tools
Simply Scored
Take Your Pick Tool
Heat Tool
Silicone Mat
Corner Rounder
Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Box.
See you next time!

Love and Hugs,
Cathryn

Tuesday, August 27, 2024

BUBBLE KEYCHAIN TREAT BOX with POTIONS & SPELLS - KIT PROJECT 1 - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a treat box that measures  3  x  3  x  1".  I used the Potions & Spells stamp set, Stylish Shapes dies and Pumpkin Pie Cardstock.

You can watch my Video Tutorial Here!


I started with a piece of Pumpkin Pie Cardstock sized
9  x  7"
I scored both sides at:
1,  2,  5  and 6"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached several pieces of Spider paper from my stash (Stampin' Up! has no Halloween DSP this year).

(2)  2 3/4  x  2 3/4"  front and back of flap
(4)  3/4  x  2 3/4"  sides


I stamped the Cat onto Basic White Cardstock with Tuxedo Black Ink.
I cut the image out using the matching dies and colored it with Stampin' Blends.
Dark Smokey Slate  -  Fur
Dark Bubble Bath  -  Nose
Dark Granny Apple Green  -  Eyes


I punch 2 sets of holes in the top flap and bottom 1" piece with a 1/8" hole Punch.
I ran about 17" of ribbon from my stash through the holes and tied a bow on the top.


I cut a  2 1/8" circle from Daffodil Delight Cardstock using the Stylish Shapes dies.
I attached the Cat to the Circle with Liquid Glue.
I attached the entire piece to the front of the box, above the bow, with Dimensionals.


I stamped the sentiment "A Little Hocus Pocus" onto Granny Apple Green Cardsdtock with Tuxedo Black Ink.
I cut the sentiment out by hand and attached it to the upper left of the box with a Dimensional and Liquid Glue.


For the final touch I added 3 Black Gems from my Stash.



Supplies:
Potions & Spells stamps set & dies Bundle
Stylish Shapes dies
Patterned Paper from my stash
Pumpkin Pie Cardstock
Daffodil Delight Cardstock
Basic White Cardstock
Tuxedo Black Ink
Stampin' Blends
Ribbon & Gems from my stash
Liquid Glue
Dimensionals
Tools
Simply Scored
Take Your Pick Tool
Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.
See you next time!

Love & Hugs,
Cathryn

Friday, August 16, 2024

FALL FLOWERS TREAT BOX with GREETINGS OF THE SEASON - Stampin' Up!



Hi Friends!
My project today is a Fall Flowers treat box that measures  4 1/4  x  2 1/2  x  1".  I used the Country Flowers stamp set & dies Bundle, Greetings of the Season dies, Large Checked Ribbon and Speckled Dots.



I started with a piece of Peach Pie Cardstock sized
8  x  6 1/4"
I scored the  8" side at:
1,  3 1/2,  4 1/2  and  7"
I scored the  6 1/4" side at:
1  and  5 1/4"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look when you are done cutting.


I attached some retired DSP and some patterned paper from my stash 2 the box.
(2)  2 1/4  x  4"  top and bottom of flap
(2)  3/4  x  4"  long sides
(2)  2 1/4  x  3/4"  short sides


I stamped the Flowers and Can from Country Flowers stamp set onto Basic White Cardstock with Tuxedo Black Ink and cut the images out with the matching dies.

I colored them with Stampin' Blends.
Light Crumb Cake, Light and Dark Daffodil Delight  -  Can and Flowers
Light & Dark Peach Pie  -  large Flower
Dark Pumpkin Pie  -  medium Flower
Light Pumpkin Pie  -  small Flower
Light & Dark Old Olive  -  Leaves


I attached the Flowers to the top of the Can with Liquid Glue.
I cut a Label from some retired Designer Series Paper using the Greetings of the Season dies.
I attached the Flowers to the Label with Dimensionals.


I wrapped 2 strands of Large Checked Ribbon around the long side of the box and tied a bow at the top.
I attached the Level to the box, over the ribbon with Dimensionals.
For the final touch I added 3 Mossy Meadow Speckled Dots to the front of the box.



Supplies:
Country Flowers stamp set & dies Bundle
Greetings of the Season dies
Retired DSP & paper from my Stash
Peach Pie Cardstock
Basic White Cardstock
Tuxedo Black Ink
Stampin' Blends
Large Checked Ribbon
Speckled Dots
Stampin' Seal+
Liquid Glue
Dimensionals
Tools
Simply Scored
Take Your Pick Tool
Silicone Mat

Thank you for visiting my Blog today.  I hope you enjoyed my Fall Flower Box.
See you next time!

Love & Hugs,
Cathryn

Wednesday, August 14, 2024

Hearts and Hugs Little Pumpkin Halloween Treat Box with Playful Ghosts - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Treat Box that measures  2 1/4  x  3  x  1 1/4".  I used the Hearts & Hugs stamp set and dies Bundle, Playful Ghosts stamp set and Perennial Postage dies.

You can watch My Video Tutorial Here!


I started with a piece of Pumpkin Pie Cardstock sized
7 1/2  x  6 1/4"
I scored the  7 1/2" side at:
1/2,  2 3/4,  4  and  6 1/4"
I scored the  6 1/4" side at:
1 1/4,  4 1/4  and  5 1/2"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after cutting.


I attached several pieces of patterned paper from my stash to the box.
(2)  2  x  2 3/4"  front and back
(2)  1  x  2 3/4  long sides
(2)  1  x  2"  short sides


I stamped the Chipmunk image, from Hearts & Hugs stamp set,   and  the Pumpkin (with ghost) image from Playful Ghosts stamp set onto Basic White Cardstock with Tuxedo Black Ink.
I cut the Chipmunk out using the matching die and cut the 2 pieces of the Pumpkin out by hand.


I colored the images with Stampin' Blends.
Light & Dark Pecan Pie  -  Chipmunk
Dark Daffodil Delight  -  Eyes and Mouth
Light & Dark Pumpkin Pie  -  Pumpkin
Light Old Olive  -  Stem
I attached the Pumpkin to the middle of the Chipmunk's Belly and the top to his Head with Liquid Glue.


I cut a  2 3/8  x  1 1/2" rectangle from retired DSP with the Perennial Postage dies.
I cut a  2 1/2  x  1 3/4"  rectangle from Pumpkin Pie Cardstock.
I attached the rectangles together with Liquid Glue.


I attached the rectangles to the top of the box with Dimensionals.
Next, I attached the Chipmunk to the rectangles with Dimensionals.


For the final touch I tied a bow with Iridescent Striped Ribbon and attached it to the box with Liquid Glue and a Glue Dot.



Supplies:
Hearts & Hugs stamp set and dies Bundle
Playful Ghosts stamp set
Perennial Postage dies
Retired DSP and paper from my stash
Pumpkin Pie Cardstock
Basic White Cardstock
Stampin' Blends
Iridescent Striped Ribbon
Tear & Tape
Liquid Glue
Dimensionals
Tools
Simply Scored
Take Your Pick Tool
Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.
See you next time!

Love & Hugs,
Cathryn

Tuesday, August 13, 2024

FILLED with CHEER PUMPKIN CART TREAT BOX with CHOOSE HAPPY - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a treat box that holds a Fruit Roll Up fidget toy.  
The box measures. 4 1/2  x 3  x  1".  I used the Filled with Cheer stamp set, Choose Happy stamp set and Everyday Details dies.

You can watch my Video Tutorial Here!

\

I started with a piece of Pumpkin Pie Cardstock sized
9  x  8"
I scored the  9" side at:
2,  3,  6  and. 7"
I scored the  8 side at:
3/4,  1 3/4,  6 1/4  and  7 1/4"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look when you are finished.


I attached several pieces of Regals DSP and patterned paper from my stash to the box.
(4)  4 1/4  x  1 3/4"  front and back of flaps
(2)  4 1/4  x  3/4"  long sides
(2)  3/4  x  2 3/4"  short sides


I stamped the Wagon and Wheels images, from Filled with Cheer stamp set, onto Basic White Cardstock with Tuxedo Black Ink.
I stamped 3 of the Pumpkins, from Choose Happy stamp set, onto Basic White Cardstock with Tuxedo Balck Ink.
I fussy cut the images out by hand and colored them with Stampin' Blends.
Light & Dark Pecan Pie  -  Wagon and Wheels
Dark Pumpkin Pie  -  Pumpkins
Dark Old Olive  -  Stems


I cut 2  3 3/4  x  2 1/4" rectangles, one from patterned paper and one from Old Olive Cardstock, using the Everyday Details dies.
I attached the 2 pieces together with Liquid Glue.
I attached the bottom of the 3 Pumpkins to the back of the Wagon with Liquid Glue and attached the entire piece to the rectangles with Dimensionals.


I tied Large Checked Ribbon around the short side of the box and tied a bow on the top.
I attached the rectangles over the ribbon, top half only, to the top flap with Dimensionals.


For the final touch I added 3 Mossy Meadow Speckled Dots to the Wagon.



Supplies:
Filled with Cheer stamp set
Choose Happy stamp set
Everyday Details dies
Regals Designer Series Paper
Pumpkin Pie Cardstock
Old Olive Cardstock
Basic White Cardstock
Tuxedo Black Ink
Stampin' Blends
Tuxedo Black Ink
Large Check Ribbon
Speckled Dots
Liquid Glue
Dimensionals
Tools
Simply Scored
Take Your Pick Tool
Corner Rounder
Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my box.
See you next time!

Love & Hugs,
Cathryn

Friday, August 9, 2024

POCKET THOUGHTS BIRTHDAY CUPCAKE TREAT BOX with KEEPING TABS - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Treat Box that holds a Cupcake Maze Keychain.  It measures  3 1/4  x  4 1/2  x  1".  I used the Pocket Thoughts stamp set, Keeping Tabs stamp set & Punch Bundle, Stylish Shapes dies and Lily Pond Lane Designer Series Paper.

You can watch My Video Tutorial Here!


I started with a piece of Pretty In Pink Cardstock sized
9  x  8 1/2"
I scored the  9" side at:
1,  4 1/4,  5 1/4  and  8 1/2"
I scored the  8 1/2" side at:
1,  5 1/2  and  6 1/2"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look when you are done cutting.


I attached several pieces of Lily Pond Lane Designer Series Paper to the box.
(1)  3  x  3 1/4"  top front
(1)  3  x  1 1/4"  bottom front
(1)  4 1/4  x  3"  back
(2)  3  x  3/4"  short sides
(2)  3/4  x  4 1/4"  long sides
(1)  3  x  1 3/4"  back flap
I attached a 3/8" Adhesive Backed Velcro Dots to the back of the box for the closure.


I stamped the Icing of the Cupcake, from Pocket Thoughts stamp set, onto Basic White Cardstock with Pretty In Pink Ink.
I stamped the outlines with Tuxedo Black Ink.
I fussy cut the image out by hand.

I colored it with Stampin' Blends.
Light Bubble Bath  -  Parts of Icing
Dark Gray Granite  -  Cupcake Bottom


I cut a  2 3/8  x  2 3/8" square from Gingham DSP using the Stylish Shapes dies.
I attached the square to a piece of Basic White Cardstock, sized  2 1/2  x  2 1/2",  with Liquid Glue.


I stamped the Flowered Tab image, from Keeping Tabs stamp set, onto Basic White Cardstock with Pretty In Pink Ink.
I stamped the sentiment into the open area of the tab with Tuxedo Black Ink.
I cut the Tab out using the Keeping Tabs Punch.
I attached the tab to the top right of the Squares with Liquid Glue.


I attached the Cupcake to the Squares with Dimensionals.
I tied Iridescent Striped Ribbon around the bottom of the box, where the two DSP patterns meet, and tied a bow at the front.


I attached the Squares to the top of the box with Dimensionals.
For the final touch I added an Iridescent Foil Gem to the top of the Cupcake.



Supplies:
Pocket Thoughts stamp set
Keeping Tabs stamp set & Punch Bundle
Stylish Shapes dies
Lily Pond Lane Designer Series Paper
Pretty In Pink Cardstock
Basic White Cardstock
Pretty In Pink Ink
Tuxedo Black Ink
Stampin' Blends
Iridescent Striped Ribbon
Tear & Tape
Liquid Glue
Dimensionas
Glue Dots
3/8" Adhesive Backed Velcro Dots
Tools:
1 3/4" Circle Punch
Stampin' Pierce Mat
Corner Rounder


Thank you for visiting my Blog.  I hope you enjoyed my Treat box Today.
See you next time!

Love & Hugs,
Cathryn