BEARY CUTE CHRISTMAS TREAT BOX with BEARY CHRISTMAS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Christmas Treat Box that measures  3 3/4  x  4 1/4  x  1 1/4".  I used the Beary Christmas stamp set & Punch Bundle, Beary Christmas Designer Series Paper, Stylish Shapes dies and Iridescent Discs.
You can watch my Video Tutorial Here!

I started with a piece of Real Red Cardstock sized

10 1/2  x  7 1/2"

I scored the  10 1/2" side at:

1 1/4,  5,  6 1/4  and  10".

I scored the  7 1/2" side at:

1 1/4,  5 1/2  and  6 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look like after scoring and cutting.

I attached 6 pieces of Beary Christmas Designer Series Paper to the box.

(2)  3 1/2  x  4"  front and back

(2)  1  x  4"  long sides

(2)  1  x  3 1/2"  short sides

I attached the DSP to the box with Liquid glue.

I stamped the outline of the Tree with Old Olive Ink onto Old Olive Cardstock.  I stamped the inside of the Tree with Old Olive Ink too.

I stamped the Outline of the Bear and Gift onto Very Vanilla Cardstock with Tuxedo Black Ink.

I stamped the Scarf the Real Red Ink.

I colored the Present with a Dark Real Red Stampin' Blend.

I cut the Bear out using the Beary Cute Punch.

I cut the Tree and Present out by hand.

I cut a square of Beary Christmas Designer Series Paper sized  2 3/4  x  2 3/4"  using the Stylish Shapes dies.

I attached the Tree first with Dimensionals and then the Present and Bear with Dimenisonals and Liquid Glue.

I cut a pieces of Real Red Cardstock sized

3  x  3 1/3".

I ran Real Red Ribbon around the rectangle and tied a bow at the top.

I attached the Square to the bottom of the

rectangle, over the ribbon, with Dimensionals.

I attached the entire pieces to the front of the box with Dimensionals.

For the final touch I added 3 Poppy Parade Iridescent Discs to the Tree.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Beary Cute stamp set & punch Bundle

Beary Christmas Designer Series Paper

Stylish Shapes dies

Real Red Cardstock

Very Vanilla Cardstock

Old Olive Cardstock

Tuxedo Black Ink

Old Olive Ink

Real Red Ink

Real Red & Garden Green Ribbon Combo Pack

Iridescent Discs

Tear & Tape

Liquid Glue

Dimensionals

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Christmas Treat Box.

See you next time!

Love and Hugs,

Cathryn

TRICKS & TREATS SIMPLE HALLOWEEN BOX with THEM BONES - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Simple Halloween Treat Box that measures  3 1/4  x  3 1/4  x  3/4".  You can make 2 of these boxes from one pieces of Cardstock.  I used the Tricks & Treats stamp set & dies Bundle, Stylish Shapes dies and Them Bones Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a piece of Basic Black Cardstock sized

8 1/2  x  5 1/2"

I scored the  8 1/2" side at:

1/2,  3 3/4,  4 1/2  and  7 3/4".

I scored the  5 1/2" side at:

3/4,  4  and  4 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached 2 pieces of Them Bones Designer Series Paper to the box.

(2)  3 x 3"  front and back

I attached the DSP to the box with Liquid Glue.

I cut the Ghost from Basic White Cardstock and the Boo from Pumpkin Pie Cardstock using the Tricks & Treats dies.

I cut a 1 3/4" circle from Daffodil Delight Cardstock and a 2 3/8 x 2 3/8" square from Them Bones DSP using the Stylish Shapes dies.

I cut a square sized  2 1/2  x  2 1/2" from Gorgeous Grape Cardstock.

I attached the two squares together with Liquid Glue.

I attached a small pieces of Basic Black Cardstock behind the Ghost's Eyes and Mouth with Liquid Glue.

I stamped the Bats onto the circle with Tuxedo Black Ink.

I attached the circle to the squares with Liquid Glue.

I attached the Ghost to the left side of the squares with Liquid Glue.

I added the Boo to the edge of the Ghost and Moon with pieces of Dimensionals and Liquid Glue.

I tied Glittered Organdy Ribbon around the box and tied a bow at the top.

I attached the embellished squares to the front of the box, over the ribbon, with Dimensionals.

For the final touch I added 3 Pretty Peacock Blooming Pearls to the front of the box.

You can shop for your Stampin' Up! Supplies with Me here.

Supplies:

Tricks & Treats stamp set and dies Bundle

Stylish Shapes dies

Them Bones Designer Series Paper

Basic Black Cardstock

Basic White Cardstock

Daffodil Delight Cardstock

Pumpkin Pie Cardstock

Gorgeous Grape Cardstock

Glittered Organdy Ribbon

Blooming Pearls

Tear & Tape

Liquid Glue

Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Box.

See you next time!

Love and Hugs,

Cathryn

LAYERED TREE TREAT BOX with JOY OF CHRISTMAS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Christmas Treat Box that measures  4 3/4  x  3 3/4  x  1".  I used the Merriest Trees stamp set & dies Bundle, Nested Essentials dies, Joy of Christmas Designer Series Paper and Blooming Pearls.  This box is made with 2 pieces of Cardstock.
You can watch my Video Tutorial Here!

I started with a piece of Garden Green Cardstock sized

8 3/4  x  8 1/2"

I scored the  8 3/4" side at:

1,  2,  6 3/4  and   7 3/4"

I scored the  8 1/2" side at:

1,  4 3/4  and  5 3/4"

Next I cut a piece of Garden Green Cardstock sized

4 7/8  x  4 3/4"

I scored the  4 7/8" side ONLY at:

1"

To cut and put the box together you can watch my Video Tutorial Here.

Below are pictures of how your Cardstock should look after scoring and cutting.

I attached several pieces of Joy of Christmas Designer Series Paper to the box.

(2)  3 5/8  x  4 1/2"   front and bottom of top flap

(1)  3 1/2  x  4 1/2"  back of box

(2)  2 1/4  x  4 1/2"  top and bottom of inside flap

(2)  3/4  x  4 1/2"  long sides

(2)  3/4  x  3 1/2"  short sides

I attached the DSP to the box with Liquid Glue.

I stamped the Large Tree 5 times, from Merriest Trees stamp set, onto Basic White Cardstock with Garden Green Ink.

I used the 5 Tree dies, from Merriest Trees dies, to cut a layer from each one of the stamped images.

I put the tree layers together with Liquid Glue, Dimensionals and Mini Dimensionals.

I stamped 2 presents and 2 bows onto Basic White Cardstock with Real Red and Granny Apple Green Inks.

I cut them out using the Merriest Trees dies.

I attached the Bows to the Presents with Liquid Glue.

I cut the Garland out of Real Red Cardstock and attached it to each layer with Liquid Glue.

I attached the entire Tree to the front of the box with Liquid Glue.

I cut a Star from Daffodil Delight Cardstock and attached it to the top of the Tree with a Mini Dimensional.

I attached the Presents to the lower left side of the Tree with Dimensionals.

I cut a  2 5/8  x  1 7/8 " Rectangle from Real Red Cardstock using the Nested Essentials dies.

I stamped the sentiment onto the Rectangle with Tuxedo Black Ink.

I attached the sentiment inside the front flap with Liquid Glue.

For the final touch I added 3 Gold Blooming Pearls to the Tree.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Merriest Trees stamp set & dies Bundle

Nested Essentials dies

Joy of Christmas Designer Series Paper

Garden Green Cardstock

Real Red Cardstock

Daffodil Delight Cardstock

Basic White Cardstock

Garden Green Ink

Real Red Ink

Granny Apple Green Ink

Tuxedo Black Ink

Blooming Pearls

Simply Scored

Take Your Pick Tool

Stampin' Seal+

Liquid Glue

Dimensionals

Mini Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my Christmas Tree Treat Box.

See you next time!

Love and Hugs,

Cathryn

AUTUMN GIFT BOX with PICK OF THE PATCH - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Fall Gift Box that measures  3 3/4  x  3 3/4  x  1".  I used the Pick of the Patch stamp set & Punch Bundle, Stylish Shapes dies, All About Autumn Designer Series Paper and Blooming Pearls.
You can watch my Video Tutorial Here!

I started with a pieces of Pretty Peacock Cardstock sized

10  x  6 1/2"

I scored the  10" side at:

1/2,  4 1/4,  5 1/4  and  9".

I scored the  6 1/2" side at:

1,  4 3/4  and  5 3/4".

To cut and put the box together you can watch my Video Tutorial here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached 6 pieces of All About Autumn Designer Series Paper to the box.

(2)  3 1/2  x  3 1/2"  front and back

(4)  3/4  x  3 1/2"  sides

I attached the DSP to the box with Liquid Glue.

I cut a 3" circle from Very Vanilla Cardstock using the Stylish Shapes dies.

I stamped the sentiment, from Pick of the Patch stamp set, onto the top of the circle in two parts with Pretty Peacock Ink.  I covered the sentiment with tape in order to split the sentiment into 2 lines.

I stamped 3 sets of Leaves on the bottom right side of the circle with Pretty Peacock Ink.

I stamped the large Pumpkin with Pretty Peacock Ink.

The wide Pumpkin with Pumpkin Pie Ink and the skinny Pumpkin with Daffodil Delight Ink.

I stamped the Stems and Leaf with Old Olive Ink.

I cut out the Skinny Pumpkin by hand and the rest with the Pick of the Patch Punch.

I attached the Large Pumpkin to the circle first with Liquid Glue.  Next I attached the Skinny pumpkin and them the wide Pumpkin with Dimensionals.

I attached the Leaf to the side of the Large Pumpkin Stem with Liquid Glue.

I cut a  2 3/4"  square from Pretty Peacock Cardstock using the Stylish Shapes dies.

I attached the Circle on top of the square with Dimensionals.

I attached the entire piece to the top of the box with Dimensionals.

I tied Lost Lagoon Bordered Ribbon around the long side of the top flap and tied a bow at the top.

for the final touch I added 3 Gold Blooming Pearls around the Pumpkins.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Pick of the Patch stamp set & Punch Bundle

Stylish Shapes dies

All About Autumn Designer Series Paper

Pretty Peacock Cardstock

Very Vanilla Cardstock

Pretty Peacock Ink

Pumpkin Pie Ink

Daffodil Delight Ink

Old Olive Ink

Lost Lagoon Bordered Ribbon

Blooming Pearls

Simply Scored

Take Your Pick Tool

Stampin' Pierce Mat

Tear & Tape

Liquid Glue

Dimensionals

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Fall Gift Box.

See you next time!

Love and Hugs,

Cathryn

HALLOWEEN VAMPIRE TREAT BOX with TRICKS & TREATS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Halloween Treat Box that measures  3 1/2  x  2 3/4  x  1/2".  I used the Tricks & Treats stamp set & dies Bundle, Nested Essentials dies and Them Bones Designer Series Paper.You can get 2 of these Treat Boxes from one sheet of Cardstock.
You can watch my Video Tutorial Here!

I started with a pieces of Pumpkin Pie Cardstock sized

8  x   5 1/2"

I scored the  8" side at:

1 1/2,  2,  4 3/4  and  5 1/4".

I scored the  5 1/2" side at:

1/2,  1,  4 1/2  and  5".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Them Bones Designer Series Paper to the box.

(3)  3 1/4  x  2 1/2"  front & back of flap and back of box

(1)  3 1/4  x  1 1/4"  inside bottom

I attached the DSP to the box with Liquid Glue.

I stamped the Vampire onto Basic White Cardstock.

Head  -  Parakeet Party Ink

Hair & Face  -  Tuxedo Black Ink

I cut the Vampire and the "Boo" (from Pumpkin Pie Cardstock) using the Tricks & Treats dies.

I wound Black & White Gingham Ribbon around the long side of the box and tied a bow on the left side.

I cut a  2 5/8  x  1 7/8"  rectangle from Them Bones DSP with the Nested Essentials dies.

I attached the rectangle to the front of the box, over the ribbon, with Dimensionals.

I added the Vampire to the middle of the rectangle with Dimensionals.

I attached the "Boo"  to the lower left of the rectangle with Liquid Glue.

For the final touch I added 1 Ghost and 2 Bats (from the Glow in the Dark Bats & Ghosts) around the Vampire.

You can get your Stampin' Up! supplies with Me here.

Supplies:

Tricks & Treats stamp set & dies Bundle

Nested Essentials dies

Them Bones Designer Series Paper

Pumpkin Pie Cardstock

Basic White Cardstock

Parakeet Party Ink

Tuxedo Black Ink

Glow in the Dark Bats & Ghosts

Simply Scored

Take Your Pick Tool

Tear & Tape

Liquid Glue

Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.

See you next time!

Love and Hugs,

Cathryn

No Cut Halloween Treat Box with Bag of Bones - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My Project today is a No Cut Halloween Treat Box that measures  4  x  3  x  1/2".  I used the Bag of Bones stamp set & dies Bundle, Stylish Shapes dies, Deckled Circle dies and Them Bones Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a pieces of Gorgeous Grape Cardstock sized

7 1/4  x  3"

I scored the  7 1/4" Only at:

4,  4 1/2  and  6  1/2".

I rounded the corners of both ends.

Below is a picture of how your Cardstock should look after scoring and rounding the corners.

I attached 4 pieces of Them Bones Designer Series Paper to the box.

(2)  2 3/4  x  3 3/4"  inside front and back (I rounded the top of both pieces)

(1)  2 3/4  x  1 3/4"  bottom front 

(1)  2 3/4  x  1/2"  on front flap (I rounded the bottom side)

I attached the DSP to the box with Liquid Glue.

I cut the Crypt from the Them Bones Designer Series Paper using the Bag of Bones Dies.

I attached the Crypt to the inside of the box with Liquid Glue.

I ran Iridescent Ribbon around the short side of the box, under the front flap, and tied a bow on the right side.

I attached the flap down with Liquid Glue.

I stamped the Large Skeleton, Dog and Cat, from Bag of Bones stamp set,  onto Basic Black Cardstock using Versamark Ink.

I covered the images with White Stampin' Emboss Powder and shook the excess off.

I heated the images with a Heat Tool.

I cut the images out using the Bag of Bones dies.

I attached the Skeleton inside the front, behind the treat, on the left side with Liquid Glue.

I attached the Dog Skeleton on the right side of the front piece with Liquid Glue.

I attached the Cat Skeleton on the left side with Liquid Glue.

I cut out 2 circles.  A  1 1/4" circle from Parakeet Party Cardstock using the Stylish Shapes dies and a  1 1/2" circle from Gorgeous Grape Cardstock using the Deckled Circle dies.

I stamped the sentiment onto the Parakeet Party circle with Tuxedo Black Ink.

I attached the circles together with Liquid Glue.

I attached the sentiment in between the Cat and Dog Skeletons with Dimensionals.

For the final touch I added 3 Parakeet Party 2022-2024 In Color Pearls around the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Bag of Bones stamp set & dies Bundle

Stylish Shapes dies

Deckled Circle dies

Them Bones Designer Series Paper

Gorgeous Grape Cardstock

Parakeet Party Cardstock

Basic Black Cardstock

Versamark Ink

Tuxedo Black Ink

White Stampin' Emboss Powder

Iridescent Ribbon

2022-2024 In Color Pearls

Simply Scored

Take Your Pick Tool

Liquid Glue

Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.

See you next time!

Love and Hugs,

Cathryn

MERRY & BRIGHT CHRISTMAS BULB TREAT BOX with MERRY, BOLD & BRIGHT - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Christmas Treat Box that measures  3 1/2  x  5 1/4  x  1 1/4".  I used the Merry & Bright stamp set and dies Bundle, Stylish Shapes dies, Merry, Bright & Bold Designer Series Paper and Inked Botanicals Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a pieces of Real Red Cardstock sized

10  x  6 1/2"

I scored the  10" side at:

1 1/4,  4 3/4,  6  and 9 1/2".

I scored the  6 1/2" side at:

1 1/4,  4 3/4  and  5 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Merry, Bold & Bright Designer Series Paper to the Box.

(2)  3 1/4  x  3 1/4"  front and back

(2)  1  x  3 1/4"  sides

(1)  7/8  x  3 1/4"  front top

(1)  3/4  x  3 1/4"  back top

I attached the DSP to the box with Liquid Glue.

I stamped the Bulb, from Merry & Bright stamp set onto Basic White Cardstock.

One with Real Red Ink and one with Granny Apple Green Ink.

I stamped the caps of the lights with Garden Green Ink.

I stamped the Green Filament with Garden Green Ink.

I stamped the Red Filament with Cherry Cobbler Ink.

I cut the images out using the Merry & Bright dies.

I cut a wire from Garden Green Cardstock with the Merry & Bright dies.

I attached the pieces of each Bulb together with Liquid Glue.

I strung the lights onto the wire and put some Liquid Glue on the to attached it to the Bulbs.

I cut a 2 3/4  x  2 3/4" square from Garden Green Cardstock and a 2 1/2" circle from Inked Botanicals DSP using the Stylish Shapes dies.

I attached the top of the Bulbs and Wire to the circle with Liquid Glue.

I added a Dimensional under the end of each Bulb.

I attached the circle to the square with Dimensionals.

I attached the entire piece to the front of the box with Dimensionals.

I stamped the sentiments onto Basic White Cardstock with Real Red and Granny Apple Green Inks.

I cut the sentiments out by hand and attached them to the top/front of the box with Liquid Glue.

I put my Treat inside the box and tied Glittered Organdy Ribbon around the top flaps and tied a bow at the front.

For the final touch I added 2 white Glitter Sequins to the Bulbs.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Merry & Bright stamp set & dies Bundle

Merry, Bold and Bright Designer Series Paper

Inked Botanicals Designer Series Paper

Real Red Cardstock

Garden Green Cardstock

Basic White Cardstock

Real Red Ink

Granny Apple Green Ink

Garden Green Ink

Cherry Cobbler Ink

Glittered Organdy Ribbon

Glitter Sequins

Simply Scored

Take Your Pick Tool

Tear & Tape

Liquid Glue

Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my Christmas Treat Box.

See you next time!

Love and Hugs,

Cathryn