Friday, March 29, 2024

SUMMER TREAT BOX with BEACH DAY - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Summer Treat Box that measures  4  x  4  x  1".  I used the Beach Day stamp set & dies Bundle, Stylish Shapes dies, Deckled Circle dies and Lighter Than Air Designer Series Paper.

You can watch my Video tutorial Here!


I started with a piece of Lemon Lolly Cardstock sized
10 1/2  x  6"
I scored the  10 1/2" side at:
1,  5,  6  and  10".
I scored the  6" side at:
1  and  5".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look when your finished cutting.


I attached several pieces of Lighter Than Air Designer Series Paper to the box.
(2)  3 3/4  x  3 3/4"  front and back
(4)  3/4  x  3 3/4"  sides
I attached the DSP to the box with Liquid Glue.


I a  3" circle from Lighter Than Air (yellow) Designer Series Paper using the Stylish Shapes dies.
I cut a 3 1/4" circle from Basic White Cardstock using the Deckled Circle dies.
I attached Them together with Liquid Glue.
I cut a piece of Crumb Cake Cardstock with the sand die from the Beach Days dies.
I cut a piece of Tahitian Tide Cardstock with the bottom of the Waves dies.
I cut each of them, the Tahitian Tide Cardstock about 1" longer, with the same Stylish Shape die circle.
I layered the two pieces on top of the 3" circle with Liquid Glue.


I stamped the Umbrella, Beach Chair and Sand Castle onto Basic White Cardstock with Tuxedo Black Ink.
I colored the images with Stampin' Blends.
Light & Dark Bubble Bath  -  Umbrella
Light & Dark Balmy Blue  -  Beach Chair
Light Crumb Cake  -  Sand Castle
I cut the images out using the Beach Day dies.

'
I attached the Umbrella with a Dimensional on the top and Liquid Glue to the Pole.
I attached the Beach Chair with Dimensionals and the Sand Castle with Liquid Glue.


I wound White Herringbone Ribbon around the middle of the box and tied a bow at the top.
I attached the decorated circles to the front of the box, over the ribbon, with Dimensionals.


I cut the 2 pieces of the Palm Tree top from Parakeet Party Cardstock using the Beach Day dies.
I attached them together with Liquid Glue.
I attached the bottom half of the leaves to the upper right side of the circles.
For the final touch I added Lemon Lolly Dots to the middle of the Palm Leaves and lower right of the box.



Supplies:
Beach Day stamp set & dies Bundle
Stylish Shapes dies
Deckled Circle dies
Lighter Than Air Designer Series Paper
Lemon Lolly Cardstock
Tahitian Tide Cardstock
Crumb Cake Cardstock
Parakeet Party Cardstock
Basic White Cardstock
Tuxedo Black Ink
Stampin' Blends
White Herringbone Ribbon
Liquid Glue
Dimensionals
Simply Scored
Take Your pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Beach Day Treat Box.
See you next time!

Love and Hugs,
Cathryn

Wednesday, March 27, 2024

RUSSELL STOVER CHOCOLATE BAR TREAT BOX with PETS & MORE - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Treat Box for a Russell Stover Billion Dollar Chocolate Bar.  It measures  6 1/4  x  2 3/4  x  1/2".  I used the Pets & More stamp set, Nested Essentials dies and Lighter Than Air Designer Series Paper.

You can watch my Video Tutorial Here!


I started with a piece of Lemon Lolly Cardstock sized
8  x  7"
I scored the  8" side at:
3/4,  1 1/4  and  7 1/2"
I scored the  7" side at:
1/2,  3 1/4,  3 3/4  and  6 1/2"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached 2 pieces of Lighter Than Air Designer Series Paper to the box.
(2)  6  x  2 1/2"
to the front and back.


I stamped the Bunny from Pets & More stamp set onto Basic White Cardstock.
1 with Balmy Blue Ink,
1 with Fresh Freesia Ink and
1 with Pool Party Ink.
I cut the images out by hand.


I cut 2 die cuts out using the Nested Essentials dies.
One from Lighter Than Air DSP and one from Lemon Lolly Cardstock.
I attached the die cuts together with Liquid Glue and attached it to the front of the box with Dimensionals.


I attached the Bunnies to the die cut with Mini Dimensionals and Dimensionals.
I wound Bubble Bath Sheer Ribbon around the left side of the box and tied a bow next to the Bunnies.
For the final touch I added 3 Fresh Freesia Tinsel Gems around the right side.



Supplies:
Pets & More stamp set
Nested Essentials dies
Lighter Thank Air Designer Series Paper
Lemon Lolly Cardstock
Basic White Cardstock
Pool Party Ink
Bubble Bath Ink
Balmy Blue Ink
Sheer Ribbon Combo Pack
Tinsel Gems 3 Pack
Liquid Glue
Dimensionals
Mini Dimensionals
Corner Rounder
Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Bunny Treat Box.
See you nest time!

Love & Hugs,
Cathryn

Tuesday, March 26, 2024

MINI GHIRARDELLI BUNNY TREAT BOX with FLUFFIEST FRIENDS - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Treat Box for 2 Mini Ghirardelli chocolate bunnies.  It measures  3  x  2 1/2  x  1/2".  I used the Fluffiest Friends stamp set, Everyday Details dies and Lighter Than Air Designer Series Paper.

You can watch my Video Tutorial Here!


I started with a piece of Pool Party Cardstock sized
7 1/2  x  4 1/4"
I scored the  7 1/2" side at:
1/2,  3 1/2,  4  and  7".
I scored the  4 1/4" side at:
1/2,  3  and  3 1/2".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached several 2 pieces of Lighter Than Air Designer Series Paper to the box.
(2)  2 3/4  x  2 1/4"
I attached the DSP to the box with Liquid Glue.


I stamped the Bunny, Chick and Flowers, from Fluffiest Friends stamp set, onto Basic White Cardstock with Tuxedo Black Ink.
I cut the Bunny and Chick out with the Fluffiest Friends dies.
I fussy cut the largest Flower out by hand.


I colorer the images with Stampin' Blends.
Light and Dark Daffodil Delight  -  Chick and Flower
Light & Dark Bubble Bath  -  Bunny Ears, Feet, Nose and Cheeks
Light Smokey Slate and Color Lifter  -  Fur
I attached the Flower, over the Cupcake with Liquid Glue.


I cut a circle from Lighter Than Air Designer Series Paper using the Everyday Details dies.
I cut a 2" circle from Bubble Bath Cardstock using a 2" hole punch.
I attached them together with the Bubble Bath on the Bottom.
I attached the Bunny to the circles with Dimensionals.


I tied Lemon Lolly Sheer Ribbon around the long side of the box and tied a bow on the right side.
I attached the circles onto the front of the box, over the ribbon, with Dimensionals.


I attached the Chick to the left of the circles with 2 stacked Dimensionals.
For the final touch I added a Lemon Lolly Tinsel Gem to the middle of the Flower.



Supplies:
Fluffiest Friends stamp set
Everyday Details dies
2" Circle Punch
Lighter Than Air Designer Series Paper
Pool Party Cardstock
Bubble Bath Cardstock
Basic White Cardstock
Tuxedo Black Ink
Stampin' Blends
Sheer Ribbon Combo Pack
Tinsel Gems 4 Pack
Stampin' Seal+
Liquid Glue
Dimensionals
Corner Rounder
Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Easter Treat Box.
See you next time!

Love & Hugs,
Cathryn

Friday, March 22, 2024

LARGE TREAT BOX for CHOCOLATE COVERED CHIPS with PLAYING IN THE RAIN - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a large Treat box for some chocolate covered Potato Chips.  It measures  2 3/4  x  3 3/4  x  2 3/4".  I used the Playing in the Rain stamp set & dies, Excellent Eggs stamp set, Perennial Postage dies and Bright & Beautiful Designer Series Paper.
I used 12 x 12"  Cardstock for this box.

You can watch my Video Tutorial Here!


I started with a piece of Cardstock sized
11 3/4  x  9 1/4"
I scored the  11 3/4" side at:
2 3/4,  5 1/2,  8 1/4  and  11".
I scored the  9 1/4" side at:
2 3/4  x  6 1/2"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and  cutting.


I attached several pieces of Bright & Beautiful Designer Series Paper to the box.
(3)  2 1/2  x  3 1/2"  long sides
(2)  2 1/2  x  2 1/2" short sides
I attached the DSP to the box with Liquid Glue.


I stamped the Bunny, from Playing in the Rain stamp set, onto Basic White Cardstock with Tuxedo Black Ink.
I cut the image out using the Playing in the Rain dies.
I colored the image with Stampin' Blends.
Light & Dark Balmy Blue  -  Coat
Light Smokey Slate & Color Lifter  -  Bunny
Nose, Cheeks and Ears  -  Light Bubble Bath


I cut a piece of Lemon Lolly Cardstock with the Perennial Postage dies to 1 7/8  x  2 3/4".
I stamped the Egg image, from Excellent Eggs stamp set, onto the die cut with Lemon Lolly Ink for some background.
I attached the die cut to a piece of Balmy Blue Cardstock,  sized  2 1/8  x  3", with Liquid Glue.


I cut 2 pieces of grass and a bow tie out using the Playing in the Rain dies.
I attached the Bunny to the Postage die cut with Dimensionals and Mini Dimensionals.
I attached the 2 Grass pieces on either side of the Bunny on the die cut with Liquid Glue.


I wound Lemon Lolly Ribbon around the short side of the box and tied a bow on the right side.
I attached the rectangle pieces to the top of the box, over the ribbon, with Dimensionals.
I attached the Bow Tie to the top of the Bunny's Jacket with Liquid Glue.


I stamped the sentiment, from Excellent Eggs stamp set, onto Basic White Cardstock with Balmy Blue Ink.
I fussy cut the sentiment out and attached it under the Bunny with Mini Dimensionals.


For the final touches I added a small Balmy Blue Rainbow Dot to the middle of the Bow Tie and 3 Rhinestone Basic Jewels to the upper right of the Postage die cut.



Supplies:
Playing in the Rain stamp set & dies Bundle
Excellent Eggs stamp set
Perennial Postage dies
Bright & Beautiful Designer Series Paper
12 x 12 Cardstock
Lemon Lolly Cardstock
Balmy Blue Cardstock
Basic White Cardstock
Tuxedo Black Ink
Lemon Lolly Ink
Balmy Blue Ink
Stampin' Blends
Sheer Ribbon Combo Pack
Rainbow Dots
Rhinestone Basic Jewels
Liquid Glue
Dimensionals
Mini Dimensionals
Simply Scored
Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Treat Box.
See you next time!

Love and Hugs,
Cathryn

Friday, March 15, 2024

MOTHER'S DAY WAX SEAL FAVOR BOX with FLOWER CART - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Favor Box for Wax Seal Sticks and a Stamp.  It measures  3 3/4  x  4  x  1".  I used the Flower Cart stamp set & dies Bundle, Lighter Tan Air Designer Series Paper, Herringbone Ribbon and Rainbow Dots.

You can watch my Video Tutorial Here!


I started with a piece of Bubble Bath Cardstock sized
11  x  5 3/4"
I scored the  11" side at:
1,  5,  6  and  10".
I scored the  5 3/4" side at:
1  and  4 3/4".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached pieces of Lighter Than Air Designer Series Paper to the box.
(1)  3 1/2  x  3 3/4"  top of box
(2)  3 1/2  x  3/4"  short sides
(2)  3 3/4  x  3/4"  long sides
I attached the DSP to the box with Liquid Glue.


I stamped the pieces of the Flower Cart onto Basic White Cardstock.
Leaves  -  Granny Apple Green Ink
Bubble Bath  -  Flowers
Bottom Flower Box  -  Pecan Pie Ink
I cut a piece of yellow Lighter Than Air DSP and stamped the bottom of the Flower Cart onto the bottom/middle with Pecan Pie Ink.


I cut the two pieces of the Roof out of Basic White And Bubble Bath Cardstocks.
I attached them, with the Bubble Bath in front, with Liquid Glue.
I attached the Flowers to the Box first with Liquid Glue.
Next I attached the Roof with Liquid Glue.
I placed the entire piece onto the Wheels with Liquid Glue.



I attached a piece of Basic White Cardstock sized
3 1/4  x  3 1/2"
onto the top of the box.
I ran White Herringbone Ribbon around the side of the box and tied a bow on the left side.
I attached the DSP with the Flower Cart onto the Box, over the ribbon, with Dimensionals.


I stamped the sentiment onto Basic White Cardstock with Granny Apple Green Ink.
I fussy cut the sentiment out by hand and attached it over the bottom left of the Cart with Mini Dimensionals.
For the final touch I added 3 Bubblebath Rainbow Dots around the Flower Cart.



Supplies:
Flower Cart stamp set
Flower Card dies
Lighter Than Air Designer Series Paper
Bubble Bath Cardstock
Basic White Cardstock
Bubble Bath Ink
Granny Apple Green Ink
Pecan Pie Ink
White Herringbone Ribbon
Rainbow Dots
Liquid Glue
Dimensionals & Mini Dimensionals
Simply Scored
Take Your Pick Tool
Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Flower Cart Box.
See you next time!

Love & Hugs,
Cathryn

Wednesday, March 13, 2024

LITTLE DEBBIE EASTER CAKE TREAT BOX with PAINTED LAVENDER - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Treat Box that holds a Little Debbie Easter Basket Cake.  It measures  3 1/2  x  5  x  1".  I used the Painted Lavender Bundle, Deckle Rectangle dies, Perennial Postage stamp set and Perennial Lavender Designer Series Paper.

You can watch my Video Tutorial Here!


I started with a piece of Crumb Cake Cardstock sized
10  x  8 1/2"
I scored the  10" side at:
1,  4 1/2,  5 1/2  and  9".
I scored the  8 1/2" side at:
3/4,  1 3/4,  6 3/4  and  7 3/4".
To cut and put the box together you can watch my Video Tutorial here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached several pieces of Perennial Lavender Designer Series Paper to the box.
(2)  3 1/4  x  4 3/4"  front and back of flap
(2)  3 1/4  x  3/4"  short sides
(2)  4 3/4  x  3/4"  long sides
I attached the DSP to the box with Liquid Glue.


I wound Linen Thread around the flap 3 times and secured it under the flap.
I attached the 2nd piece of DSP over the back of the flap to hide the string.


I stamped the Lavender onto Very Vanilla Cardstock.
Lavender tops  -  2 Highland Heather Ink, 1 Gorgeous Grape Ink
Stems  -  Lost Lagoon Ink
I cut the images and 1 foliage pieces from Lost Lagoon Cardstock using the Painted Lavender dies.


I cut a Rectangle piece of Perennial Lavender Designer Series Paper to 3 7/8  x  2 1/2" using the Deckled Rectangle dies.
I attached the rectangle to the front of the box, over the Linen Thread, with Dimensioanls.


I attached the Lavender, Greens and Stems together with Mini Dimensionals and Liquid Glue.
I attached the entire piece to the rectangle with Dimensionals.
I tied a small bow with Lost Lagoon Bordered Ribbon and attached it to the top of the stems with Liquid Glue and a Glue Dot.


I stamped the sentiment, from Perennial Postage stamp set, onto Very Vanilla Cardstock with Gorgeous Grape Ink.
I fussy cut the sentiment out by hand and attached it over the Stems with Mini Dimensionals.
For the final touch I added 3 Gorgeous Grape Purple Fine Shimmer Gems.



Supplies:
Painted Lavender Bundle
Deckled Rectangle dies
Perennial Postage stamp set
Perennial Lavender Designer Series Paper
Crumb Cake Cardstock
Very Valnilla Cardstock
Lost Lagoon Cardstock
Highland Heather Ink
Gorgeous Grape Ink
Lost Lagoon Ink
Lost Lagoon Bordered Ribbon
Purple Fine Shimmer Gems
Liquid Glue
Dimensionals and Mini Dimensionals
Stampin' Seal+
Simply Scored
Take Your Pick Tool
Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Easter Cake Treat Box.
See you next time!

Love & Hugs,
Cathryn

Tuesday, March 12, 2024

EXCELLENT EGGS BANNER TREAT BOX with EVERYDAY DETAILS - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Treat Box that measures  2 3/4  x  3 3/4  x  1".  I used the Excellent Eggs Bundle, Everyday Details dies, Nested Essentials dies and Lighter Than Air Designer Series Paper.

You can watch my Video Tutorial Here!


I started with a piece of Bubble Bath Cardstock sized
9 1/2  x  8"
I scored the  9 1/2" side at:
1,  4 3/4  and  5 3/4"
I scored the  8" side at:
1,  3 3/4,  4 3/4  and  7 1/2".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached several pieces of Lighter Than Air Designer Series Paper to the box.
(4)  2 1/2  x  3 1/2"  front and back of flap and inside and back of box.
(2)  2 1/2  x  3/4"  short sides
(2)  3 1/2  x  3/4"  long sides
I attached the DSP to the box with Liquid Glue.


I stamped the Bunny, from Excellent Eggs stamp set, onto Basic White Cardstock with Tuxedo Black Ink.
I colored the image with
Light & Dark Bubble Bath Stampin' Blends.
I cut the image out using the Excellent Eggs dies.


I cut a  1 3/8"  circle from Basic White Cardstock using the Everyday Details dies.
I cut a 1 1/2" circle from Pool Party Cardstock using a Circle Punch.
I cut a  1 7/8" circle from Bubble Bath Cardstock using the Everyday Details dies.
I attached the two smaller circles together with Liquid Glue.
Then I attached those circles to the largest circle with Dimensionals.


I ran Bubble Bath Sheer Ribbon around the top of the flap and tied a bow in the front.
I cut a Banner From striped Lighter Than Air DSP using the largest Banner die from the Nested Essentials dies.


I attached the circles to the top of the Banner with Dimensionals.
I attached the entire piece to the front of the box, under the ribbon, with Dimensionals.


I stamped the sentiment "Happy Easter" on the inside of the flap with Tuxedo Black Ink.
For the final touch I added 3 Pool Party Rainbow Dots to the left side of the Banner.



Supplies:
Excellent Eggs Bundle
Everyday Details dies
Nested Essentials dies
1 1/2"  Circle Punch
Lighter Than Air Designer Series Paper
Bubble Bath Cardstock
Pool Party Cardstock
Basic White Cardstock
Tuxedo Black Ink
Light & Dark Bubble Bath Blends
Sheer Ribbon Combo Pack
Rainbow Dots
Liquid Glue
Tear & Tape
Dimensionals & Mini Dimensionals
Simply Scored
Take Your Pick Tool
Sweetarts Chicks, Ducks and Bunnies -  Target

Thank you for visiting my Blog today.  I hope you enjoyed my Easter Treat Box.
See you next time!

Love & Hugs,
Cathryn