CHRISTMAS BULB TREAT BOX with GINGERBREAD MAN BUNDLE - Kit Project #4 - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Treat Box that holds PBA Free Christmas Bulb that you can fill with Candy.  I got the Bulbs from Oriental Trading.  The box measures  2 1/4  x  4  x  2".  I used the Gingerbread Men stamp set & dies Bundle, 2 3/8" Circle Punch, Spotlight on Nature dies and the Stylish Shapes dies.
You can watch My Video Tutorial Here!

I started with a piece of Garden Green Cardstock sized:

9  x  8 1/2"

I scored the  9" side at:

2,  4 1/4,  6 1/4.  and  8 1/2"

I scored the  8 1/2" side at:

2,  6  and  8"

To cut and put the box together you can watch My Video Tutorial Here.

I attached several pieces of Designer Series Paper to the box.

Traditions of Christmas DSP

(2)  2  x  3 3/4"  front and back

(2)  2  x  1 3/4"  top and bottom

Christmas Tags & More DSP

(2)  1 3/4  x  3 3/4"  sides

I stamped the top of the Gingerbread onto Pecan Pie Cardstock with Veramark Ink.

I sprinkled the image with White Embossing Powder, shook off the excess and heated it with my Heat Tool.

I cut the Hat from Cherry Cobbler Cardstock and the squiggly Line from Basic White Cardstock.

I attached the die cuts to the Gingerbread with Liquid Glue.

I punched a circle from Traditions of Christmas DSP using the 2 3/8" Circle Punch.

I cut the bottom of the Gingerbread down to fit on the circle and attached it with Liquid Glue.

I cut a  2 3/4" circle from Garden Green Cardstock using the Spotlight on Nature dies.

I attached the circles together with Liquid Glue.

I cut a label from Garden Green Cardstock using the Stylish Shapes dies.

I stamped the sentiment "Season's Eatings" onto the label with Versamark Ink.

I sprinkled it with White Embossing Powder, shook off the excess and heated it with my Heat Tool.

I attached the label to the bottom/front of the box with Liquid Glue.

I attached the circles above the label with Dimensionals.

I tied a bow with Cherry Cobbler and Gold Satin Ribbon and attached it to the Gingerbread's Neck with a Glue Dot and Liquid Glue.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Gingerbread Man stamp set & dies Bundle

Spotlight on Nature dies

Stylish Shapes dies

Traditions of Christmas Designer Series Paper

Christmas Tags & More Designer Series Paper

Garden Green Cardstock

Cherry Cherry Cobbler Cardstock

Pecan Pie Cardstock

Basic White Cardstock

Versamark Ink

White Embossing Powder

Cherry Cobbler & Gold Satin Ribbon

Tear & Tape

Liquid Glue

Dimensionals

Glue Dots

Tools:

Simply Scored

Take Your Pick Tool

Heat Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Treat Box.

See you next time!

Love & Hugs,

Cathryn

OH SNAP! TREAT BOX with the GINGERBREAD MAN BUNDLE - KIT PROJECT #3 - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box that measures  3 3/4  x  5 1/4  x  1".  I used the Gingerbread Man stamp set & dies Bundle, Versamark Ink and White Embossing Powder.
You can watch My Video Tutorial Here!

I started with a piece of Garden Green Cardstock sized

10  x  8 1/2"

I scored the  10" side at:

1/2,  4 1/4,  5 1/4  and  9"

I scored the  8 1/2" side at:

1,  6 1/4  and  7 1/4"

To cut and put the box together you can watch My Video Tutorial Here.

I stamped the Gingerbread Man, Face and Buttons onto Pecan Pie Cardstock with Versamark Ink.

I sprinkled the image with White Embossing Powder, shook off the excess, and heated it up with my Heat Tool.

I cut the image out using the matching die.

I cut the bottom of the leg on the right side with the zigzag die.

I stamped the Crumbs image onto a piece of 3 1/2  x  5" patterned paper, from my stash, with Pecan Pie Ink.

I attached several pieces of patterned paper from my stash to the box.

(2)  3 1/2  x  5" (one I stamped the crumbs on)  front and back

(2)  3 1/2  x  3/4  short sides

(2)  3/4  x  5"  long sides

I cut 2 of the3 Hats out.  One from Garden Green Cardstock and one from Real Red Cardstock.

I cut the middle of the Green Hat and added it to the Red Hat with Liquid Glue.

I attached the Hat to the Gingerbread Man with Liquid Glue.

I cut the Candy Cane from Basic White and Real Red Cardstocks.

I attached the Candy Cane together and to the Gingerbread Man's Hand with Liquid Glue.

I cut the Scarf from Garden Green Cardstock and attached it to the neck with Liquid Glue.

I attached the Gingerbread Man, and the piece of his Leg to the front of the box with Dimensionals.

I cut the Speech Bubble from Basic White Cardstock.

I stamped the "Oh Snap" sentiment onto the Speech Bubble with Real Red Ink.

I attached the Speeck Bubble to the upper right of the box front with Dimensionals and Liquid Glue.

For the final touch I added 5 Red & White Peppermints around the front of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Gingerbread Man stamp set & dies Bundle

Patterned Paper from my stash

Garden Green Cardstock

Real Red Cardstock

Basic White Cardstock

Versamark Ink

White Embossing Powder

Pecan Pie Ink

Real Red Ink

Red & White Peppermints

Tear & Tape

Liquid Glue

Dimnensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Gingerbread Box.

See you next time!

Love & Hugs,

Cathryn

GINGERBREAD MAN COOKIE CUTTER GIFT BOX - KIT PROJECT #2 - with GINGERBREAD MAN BUNDLE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Gift Box for a Gingerbread Man Cookie Cutter I got at Target.  The box measures  2 1/2  x  3 1/4  x  1".  I used the Gingerbread Man stamp set & dies Bundle, Traditions of Christmas Designer Series Paper and Iridescent Faceted Gems.
You can watch My Video Tutorial Here!

I started with a piece of Cherry Cobbler Cardstock sized:

9 1/2  x  4 1/2"

I scored the  9 1/2" side at:

1,  4 1/4,  5 1/4  and  8 1/2"

I scored the  4 1/2" side at:

1  and  3 1/2"

To cut and put the box together you can watch My Video Tutorial Here.

Below is a picture of how your Cardstock should look.

I stamped the Gingerbread Outline, Winking eyes and Buttons onto Pecan Pie Cardstock with Versamark Ink.

I sprinkled White Embossing Powder over the images and shook off the excess.

I heated the image up with my Heat Tool.

Once the image cooled off I cut the Gingerbread out with the Matching die.

I cut the Scarf and one Hat from Cherry Cobbler Cardstock.

 I cut the Icing and another Hat from Basic White Cardstock.

I attached the Hat and Scarf to the Gingerbread with Liquid Glue.

Then I attached the Icing to the Hat with Liquid Glue.

Before attached the Traditions of Christmas Designer Series Paper to the top of the box line up your Gingerbread Man and cut the extra off with scissors alone the bottom and side edge.

(2)  2 1/4  x  3"  top flap and inside flap

(2)  2 1/4  x  3/4"  short sides

(2)  3/4  x  3"  long sides

I cut a partial circle in the short side of the top flap to make it easier to open the box.

I attached the Gingerbread Man to the box with Liquid Glue.

I cut the top pompom off the White Hat and attached it to the Cherry Cobbler Hat.

I added 3 Iridescent Faceted Gems around the box for the final touch.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Gingerbread Man stamp set & dies bundle

Traditions of Christmas Designer Seires Paper

Cherry Cobbler Cardstock

Pecan Pie Cardstock

Basic White Cardstock

Versamark Ink

White Embossing Powder

Iridescent Faceted Gems

Liquid Glue

Tools:

Simply Scored

Take Your Pick Tool

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Cookie Cutter Box.

See you next time!

Love & Hugs,

Cathryn

GINGERBREAD SPONGE SLEEVE with GINGERBREAD MAN stamp set - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is an envelope sleeve for a Gingerbread House Sponge.  It measures  4 1/2  x  5 1/2".  I used the Gingerbread Man stamp set and dies bundle, Stylish Shapes dies, Lovely Garden Designer Series Paper and Christmas Tags and More Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Soft Seafoam Cardstock sized:

11  x  5 1/2"

I scored the 11" side at:

5 1/2"

I scored the 5 1/2" side at:

1/2  and  5"

To cut and put the sleeve together you can watch My Video Tutorial Here.

Below is a picture of what your Cardstock should look like.

I attached 2 pieces of DSP to the box.

(1)  3  x  5 1/2"  to the right/front  Christmas Tags & More Designer Series Paper

(1)  1 1/2  x  5 1/4"  to the left/front  Lovely Garden Designer Series Paper

I stamped the Gingerbread onto Pecan Pie Cardstock with Versamark Ink.

I stamped the Eyes and Buttons with Versamark Ink.

I sprinkled the image with White Embossing Powder, shook off the excess and heated it up with my Heat Tool.

When it was cooled I cut the image out with one side of the die and rounded the hand with scissors.

I cut a partial circle out of the middle/top with a 1" circle punch.

I cut the Hat and Bow from Fresh Freesia Cardstock using the Gingerbread dies.

I attached the Hat and Bow to the Gingerbread Girl with Liquid Glue.

I attached the Gingerbread Girl to the front of the Sleeve with Dimensionals.

I stamped the sentiment onto Soft Seafoam Cardstock with Pecan Pie Ink.

I cut the sentiment out using the Stylish Shapes dies.

I attached the sentiment to the Gingerbread Girl with Dimensionals.

I added some Wink of Stella Glitter to the Bow and for the final touch I added 3 Iridescent Foil Gems to the upper left of the Sleeve.

You can shop for your Stmapin' Up! supplies with Me here.

Supplies:

Gingerbread Man stamp set & dies bundle

Stylish Shapes dies

Lovely Garden Designer Series Paper

Christmas Tags & More Designer Series Paper

Fresh Freesia Cardstock

Soft Seafoam Cardstock

Pecan Pie Cardsdtock

Versamark Ink

Pecan Pie Ink

White Embossing Powder

Iridescent Foil Gems

Wink of Stella

Tools:

Simply Scored

Take Your Pick Tool

Small Circle Punch

Heat Tool

Thank you for visiting my Blog today.  I hope you enjoyed my project.

See you next time!

Love & Hugs,

Cathryn

CHRISTMAS TREE SHAKER TREAT BOX with PINE TREE TRIMMINGS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box with a Shaker Dome Tree on the front.  The box measures  3 1/2  x  5  x  1 1/2".  I used the Pine Tree Trimmings stamp set & dies Bundle, Tree Shaker Domes, Textured Notes dies, and North Pole Delivery Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Pool Party Cardstock sized:

10 1/2  x  8 1/2"

I scored the  10 1/2" side at:

1/2,  4,  5 1/2  and  9"

I scored the  8 1/2" side at:

1 1/2,  6 1/2  and  8"

To cut and put the box together you can watch My Video Tutorial Here.

I attached several pieces of North Pole Delivery Designer Series Paper to the box.

(2)  3 1/4  x  4 3/4"  front and back

(2)  1 1/4  x  4 3/4"  long sides

(2)  3 1/4  x  1 1/4"  short sides

I cut out 4 rectangles to use for the front of the box.

(2)  2 1/4  x  3 3/4" from Real Red Cardstock using the Textured Notes dies.  I cut the Tree out of the middle of one of the above rectangles using the Pine Tree Trimmings dies.

(1)  2 5/8  x  4 1/8"  from (Pool Party) from the North Pole Delivery DSP

(1)  2 1/4  x  3 3/4"  from Real Red Cardstock

I stamped the Tree onto some Pool Party DSP with Garden Green Ink.

I cut the tree out using the matching die.

I got a Tree Shaker Dome out and peeled off the sticker on the front.

I put the Real Red rectangle with the Tree cut out over the dome and secured it down onto the sticker.

I flipped the tree dome to the back and added some sequins.

I added the stamped tree on top of the sequins.

I peeled off the back sticker and added the matching rectangle onto the back to seal it.

I attached the shaker dome piece onto the polka dotted Pool Party rectangle, then onto the Real Red rectangle with Liquid Glue.

I tied Real Red Shiney Ribbon around the long side of the box and tied a bow at the top.

I attached the Tree Dome piece to the front of the box with Dimensionals.

For the final touch I added 3 Pool Party Rainbow Dots to the front of the box.

You can purchase your Stampin' Up! supplies with Me here.

Supplies:

Pine Tree Trimmings stamp set & dies bundle

Textured Notes dies

Tree Shaker Domes

North Pole Delivery Designer Serise Paper

Pool Party Cardstock

Garden Green Ink

Real Red Cardstock

Silver Glitter Paper

Real Red Shiny Ribbon

Rainbow Dots

Sequins

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Shaker Box.

See you next time!

Love & Hugs,

Cathryn

CHRISTMAS TREE WINDOW BOX with PINE TREE TRIMMINGS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Window Box Treat Box that measures  2 1/2  x  4 1/2  x  1".  I used the Pine Tree Trimmings stamp set & dies Bundle, Three Banner Punch and Traditions of Christmas Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Shaded Spruce Cardstock sized:

7 1/2  x  5 3/4'

I scored the  7 1/2" side at:

1,  3 1/2,  4 1/2  and  7"

I scored the  5 3/4" side at:

1,  4 1/2  and  5"

To cut and put the box together you can watch My Video Tutorial Here.

Below is a picture of how your Cardstock should look.

I attached several pieces of Traditions of Christmas Designer Series Paper to the box, one before putting it together for the window.

(2)  2 1/4  x  3 1/4"  front and back

(2)  3/4  x  3 1/4"  long sides

(1)  2 1/4  x  3/4"  bottom

(2)  2 1/4  x  1/2"  fron and back top flap

I attached a  2 1/4  x  3 1/4"  piece of Window Sheet on the inside of the box, covering the opening, with Liquid Glue.

I cut a strip of 1/2" high Shaded Spruce Cardstock.  I cut one side into a flag using the Three Banner Punch.

I stamped the sentiment on to the strip with Versamark Ink.

I sprinkled it with White Embossing Powder and shook off the excess,

I finished it by heating the sentiment up with my Heat Tool.

I put a mini staple into the front of the sentiment and attached it to the front of the box with Liquid Glue.

I punched 2 sets of holes in the top flaps with a 1/4" Hole Punch.

I ran Real Red Shiny Ribbon through the holes and tied a bow at the front.

For the final touch I added 3 Shaded Spruce Delightful Decorative Dots to the upper right of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Pine Tree Trimmings stamp set & dies bundle

3 Banner Punch

Traditions of Christmas Designer Series Paper

Shaded Spruce Cardstock

Versamark Ink

White Embossing Powder

Ral Red Shiny Ribbon

Delightful Decorative Dots

Window Sheets

Tear & Tape

Liquid Glue

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

1/4" Hole Punch

Mini Stapler

Thank you for visiting my Blog today.  I hope you enjoyed my Window Box.

See you next time!

Love & Hugs,

Cathryn

PULL UP CHRISTMAS TREAT BOX with JOLLY DELIVERY - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box that measures  3  x  4 1/2  x  1".  It has an insert that pulls the treat out of the box for you.  I used the Jolly Delivery stamp set & dies Bundle, Spotlight on Nature dies, Stylish Shapes dies, 2 3/8" Circle Punch and the North Pole Delivery Designer Series Paper.
You can watch My Video Tutorial Here!

This box has 2 separate pieces to score.

I started with the outside of the box.  I used Real Red Cardstock sized:

8 1/2  x  5 1/2"

I scored the  8 1/2" side at:

1,  4,  5  and  8"

I scored the  5 1/2" side at:

1"

I scored the 2nd piece of the box next.  I started with a piece of Real Red Cardstock sized:

8 1/2  x  3"

I scored the  8 1/2" side ONLY at:

1,  2,  6 1/2  and  7 1/2"

To cut and put the box pieces together you can watch My Video Tutorial Here.

I attached several pieces of North Pole Delivery Designer Series Paper to the box.

(2)  2 3/4  x  4 1/4"  front and back

(2)  2 3/4  x  3/4"  long sides

(2)  3/4  x  4 1/4"  short sides

I cut out 4 circles in total.

(1)  2 3/4" from Garden Green Cardstock using the Spotlight on Nature dies

(1)  2 5/8" from Real Red Cardstock using the Stylish Shapes dies

(1)  2 3/8" from North Pole Delivery DSP using the 2 3/8" Circle Punch

(1)  1 1/4"  from Garden Green Cardstock using the Stylish Shapes dies

I attached the largest 3 circles together with Liquid Glue.

I stamped the Cat and Dog onto Basic White Cardstock with Tuxedo Black Ink and cut them out with the matching dies.

I colored the images with Stampin' Blends.

Light & Dark Pecan Pie  -  Dog

Light & Dark Real Red  -  Dogs Sweater and Letter in the Cat's Pouch

Light Smokey Slate  -  Cat

Light Bubble Bath  -  Cat's Nose and Cheek, Dog's Cheek

Light & Dark Shaded Spruce  -  Cat's Pouch

Light Pool Party  -  Letter in Cat's Pouch

I used a Mailbox and a Present from the Cutouts included with the DSP.

I attached them to the circles with Liquid Glue.

I attached the Cat and Dog to the circles with Dimensionals.

I attached the entire piece to the front of the box with Dimensionals.

I wrapped Real Red Shiny Ribbon around the box, 1" from the bottom, and tied a bow on the right.

I stamped the sentiment onto the 1 1/4" Garden Green Circle with Tuxedo Black Ink.

I attached it to the left of the box with Dimensionals.

For the final touch I added some Wink of Stella Glitter to the Cat and Dog's Noses, the Cat's Pouch Pocket and the Dog's Collar.

You can purchase your Stampin' Up! supplies with Me here.

Supplies:

Jolly Delivery stamp set & dies Bundle

Spotlight on Nature dies

Stylish Shapes dies

2 3/8" Circle Punch

North Pole Delivery Designer Series Paper

Real Red Cardstock

Garden Green Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

Real Red Shiny Ribbon

Wink of Stella

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Christmas Treat Box.

See you next time!

Love & Hugs,

Cathryn