CRAFT FAIR IDEA - GINGERBREAD JAR HERSHEY'S MINIATURES TREAT BOX with JAR OF JOY - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Cookie Jar Topped Treat Box that measures  2  x  5 1/2  x  1/2".  I used the Jar of Joy stamp set & Sweet Jar Builder Punch, Textured Notes dies and Christmas Tags & More Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Christmas Tags & More Designer Series Paper sized:

5 1/2  x  5"

I scored the  5 1/2" side at:

1/2,  2 1/2,  3  and  5"

I scored the  5" side at:

1/2"

To cut and put the box together you can watch My Video Tutorial Here.

Below is a picture of how your Cardstock should look when you are done.

I cut the window in the front of the box before putting it together.

I cut the window with a  2 3/4  x  1 1/2"  rectangle die from the Textured Notes dies.

I added a  1 3/4  x  3 1/2"  piece of Window Sheet to the inside of the box, covering the opening, with Liquid Glue. 

I stamped the Jar onto Basic White Cardstock.

I stamped the red accents of the Jar first with Real Red Ink.

Next I stamped the Cookies with Pecan Pie Ink.

I stamped the Jar with Garden Green Ink.

I stamped the Jar top onto Real Red Cardstock with Tuxedo Black Ink.

I cut both pieces of the Jar out using the Sweet Jar Builder Punch.

I cut 3 more of the bottom Jar from Real Red Cardstock to Finish off the inside of the flaps.

I attached the Jar to the top of the box, about 3/8" above the window opening, with Liquid Glue

I attached one of the Red Jars to the back of the box for the back flap.

I used  3/8" Adhesive Backed Velcro Dots for the closure.

I tied a bow with Real Red Shiny Ribbon and attached it to the front of the box, between the Jar and the Window Opening, with Glue Dots and Liquid Glue.

For the final touch I added 3 Red & White Peppermints to the bottom left of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Jar of Joy stamp set

Sweet Jar Builder Punch

Textured Notes dies

Christmas Tags & More Designer Series Paper

Basic White Cardstock

Real Red Cardstock

Real Red Ink

Pecan Pie Ink

Garden Green Ink

Tuxedo Black Ink

Window Sheet

Real Red Shiny Ribbon

Red & White Peppermints

Tear & Tape

Liquid Glue

3/8" Adhesive Velcro Dots

Tools:

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Treat Holder.

See you next time!

Love & Hugs,

Cathryn

REESE'S GREAT PUMPKIN TREAT HOLDER WITH PARTY CELEBRATIONS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Treat Holder for a Reese's Great Pumpkin Candy.  The box measures  2 1/4  x  2 3/4  x  1/2".  You can get 2 of these boxes from 1 sheet of Cardstock.  I used the Party Celebrations stamp set, Spooky Halloween stamp set & dies bundle and Spooky Halloween Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Basic Black Cardstock sized:

7 3/4  x  4 1/4"

I scored the  7 3/4" side at:

2 3/4,  3 1/4,  6  and  6 1/2"

I scored the  4 1/4" side at:

1/2,  1,  3 1/4  and  3 3/4"

To cut and put the box together you can watch My Video Tutorial here.

Below is a picture of how your Cardstock should look.

I attached 4 pieces of Spooky Halloween Designer Series Paper to the box.

(3)  2  x  2 1/2"  front and back of box, back of flap

(1)  2  x  1"  inside bottom

I cut a 1 3/4" circle from Daffodil Delight Cardstock using the 1 3/4" Circle Punch.

I stamped the Bats, from Spooky Halloween Stamp Set, onto the Moon with Tuxedo Black Ink.

I stamped the "Spooky" sentiment, from Spooky Halloween stamp set, onto Petunia Pop Cardstock with Tuxedo Black Ink.

I cut the sentiment into a rectangle.

I stamped the Stem, from Party Celebrations stamp set, onto Basic White Cardstock with Old Olive Ink.

I stamped the Pumpkin onto Basic White Cardstock using Pumpkin Pie Ink.

I fussy cut the image out by hand.

I cut the Fence from Basic Black Cardstock using the Spooky Halloween dies.

I tied Petunia Pop Iridescent Ribbon around the long side of the box and tied a bow at the top.

I attached the Moon to the top/front of the box, over the ribbon, with Liquid Glue.

Next I attached the Fence to the bottom with Liquid Glue also.

I attached the Pumpkin with Dimensionals.

I attached the sentiment into the gap between the Moon and Fence with Liquid Glue.

For the final touch I added 3 Petunia Pop Sparkle Star Stickers to the Pumpkin and Moon.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Party Celebrations stamp set

Spooky Halloween stamp set & dies Bundle

Spooky Sweet Designer Series Paper

1 3/4" Circle Punch

Basic Black Cardstock

Daffodil Delight Cardstock

Petunial Pop Cardstock

Basic White Cardstock

Pumpkin Pie Ink

Old Olive Ink

Tuxedo Black Ink

Petunia Pop Iridescent Ribbon

Shimmer Star Foam Stickers

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Holder.

See you next time!

Love & Hugs,

Cathryn

HALLOWEEN TAG TREAT BOX with FRIGHT NIGHT - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a box that measures  2 1/2 x 4 1/4  x  1".  I used the Tag dies from Fright Night dies to make the box.  I also used the Fright Night stamp set, Spooky Sweet Designer Series Paper and Timid Tiger Faux Linen Ribbon.
You can watch My Video Tutorial Here!

I started with a piece of Basic Black Cardstock sized:

7  x  6"

I scored the  7" side at:

3/4,  1 3/4,  5 1/4  and  6 1/4"

I scored the  6" side at:

1,  2 1/2,  3 1/2  and  5"

To cut and put the box together you can watch My Video Tutorial Here.

Below is a picture of how your Cardstock should look.

I attached 4 pieces of Spooky Sweet Designer Series Paper to the box.

(2)  3/4  x  3 1/4"  long sides

(2)  1 1/4  x  3/4"  short sides

I stamped the Tag stamp onto Basic White Cardstock with Versamark Ink.

I sprinkled the image with Black Stampin' Emboss Powder and spilled off the excess.

I heated the image with my Heat Tool, waited for it to cool, then cut it out with the matching die.

I cut 2 of the Larger Tags using the Fright Night dies.  One from Pumpkin Pie Cardstock and one from Basic Black Cardstock.

I adhered the embossed image onto the Pumpkin Pie Tag with Liquid Glue.

I attached the inner box to the Tags, Basic Black on the bottom, with Liquid Glue.

I tied a bow with Timid Tiger Faux Linen Ribbon and attached it to the top of the stamped tag with a Glue Dot and Liquid Glue.

For the final touch I added 3 Timid Tiger 2025-27 In Color Flat Pearls around the front of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Fright Night stamp set & dies Bundle

Spooky Sweet Designer Series Paper

Pumpkin Pie Cardstock

Basic Black Cardstock

Basic White Cardstock

Versamark Ink

Black Stampin' Emboss Powder

Timid Tiger Faux Linen Ribbon

2025-2027 In Color Flat Pearls

Liquid Glue

Glue Dots

Tools:

Simply Scored

Take Your Pick Tool

Heat Tool

Thank you for visiting my Blog.  I hope you enjoyed my Halloween Tag Treat Box.

See you next time!

Love & Hugs,

Cathryn

GHOST IN A BOTTLE TREAT BOX with FRIGHT NIGHT - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a box that measures  2 1/2  x  3 1/2  x  1 1/4".  I got the ghost in the bottle from Target.  I used the Fright Night stamp set & dies Bundle, Spooky Sweet Designer Series paper and Shimmer Stars Foam Stickers.
You can watch My Video Tutorial Here!

I started with a piece of Pumpkin Pie Cardstock sized:

8 3/4  x  7 1/2"

I scored the  8 3/4" side at:

1 1/4,  3 3/4,  5  and  7 1/2"

I scored the  7 1/2 side at:

3/4,  2,  5 1/2  and  6 3/4"

To cut and put the box together you can watch My Video Tutorial Here.

Below is a picture of how your Cardstock should look.

I attached several pieces of Spooky Halloween Designer Series Paper to the box.

(1)  2 1/8  x  3 1/8"

I attached this piece to a piece of Gorgeous Grape Cardstock 2 1/4  x  3 1/4"

(1)  2 1/4  x  3 1/4"  inside flap

(2)  2 1/4  x  1"  short sides 

(2)  1  x  3 1/4"  long sides

I cut out several pieces of Cardstock using the Fright Night dies.

(2)  Webs - Black Glitter Paper or Cardstock

(1)  Spider - Gorgeous Grape Cardstock

(2)  Boo - Pumpkin Pie Cardstock

I attached the 2 1/8  x  3 1/8" piece of DSP to the Gorgeous Grape rectangle with Liquid Glue.

I attached the 2 webs next to each other, hanging off the edges, with Liquid Glue.  I cut the excess off with my scissors.

I added some Wink of Stella Glitter to one of the "Boo"s and attached them with Liquid Glue.

I attached the Spider to the middle of the Webs with a Black Mini Dimensional.

I attached the entire piece to the front of the box with Liquid Glue.

I tied a bow with Black Baker's Twine and attached it to the top of the Web with a Glue Dot and Liquid Glue.

For the final touches I added a Purple Shimmer Gem to the Spider and 3 Black Shimmer Stars Foam Stickers around the Boo.

You can shop for your Stampin' Up! products with Me Here!

Supplies:

Fright Night stamp sets & dies Bundle

Spooky Sweet Designer Series Paper

Pumpkin Pie Cardstock

Gorgeous Grape Cardstock

Basic Black Cardstock

Wink of Stella Glitter

Purple Shimmer Gems

Shimmer Stars Foam Stickers

Baker's Twine Essentials Pack

Liquid Glue

Mini Black Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Silicone Mat

Sponge

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Box.

See you next time!

Love & Hugs,

Cathryn

HAUNTED HOUSE OPEN TOP BOX with SPOOKY HALLOWEEN - KIT PROJECT 5 - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box that measures  2 1/2  x  3 3/4  x  1".  I used the Spooky Halloween stamp set & dies Bundle, Spooky Sweet Designer Series Paper, Petunia Pop Iridescent Ribbon and Iridescent Treat Bags.
You can watch My Video Tutorial Here!

I started with a piece of Petunia Pop Cardstock sized

7 1/2  x  4 3/4"

I scored the  7 1/2" side at:

1,  3 1/2,  4 1/2  and  7"

I scored the  4 3/4" side at:

1"

To cut and put the box together you can watch My Video Tutorial Here.

Below is a picture of how your Cardstock should look.

I attached 5 pieces of Spooky Sweets Designer Series Paper to the box.

(2)  2 1/4  x  3 1/2"  front and back

(2)  3/4  x  3 1/2"  long sides

(1)  2 1/4  x  3/4"  bottom

I cut the Bats and Fence from Basic Black Cardstock.

I cut the Haunted House from Petaunial Pop Cardstock.

I attached 2 pieces of Daffodil Delight Cardstock behind the openings in the House.

(1)  3/8  x  2"

(1)  5/8  x  1 1/2"

I attached the strips to the back of the House with Liquid Glue.

I attached the Haunted House to the bottom of the box front with Liquid Glue.

Next I attached the Fence over the bottom of the House with Liquid Glue.

I cut a piece of Granny Apple Green Cardstock sized 7/8" high,

I stamped the sentiment onto the Cardstock with Tuxedo Black Ink.

I cut the length down and attached it diagonally above the House with Liquid Glue.

I added the 2 Bats with Liquid Glue.

I added 3 White Shimmer Star Foam Stickers to the sentient and Haunted House.

I added some Candy to an Iridescent Treat Bag and tied the top with some Petunia Pop Iridescent Ribbon.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Spooky Halloween stamp set & dies Bundle

Petunia Pop Cardstock

Daffodil Delight Cardstock

Granny Apple Green Cardstock

Basic Black Cardstock

Tuxedo Black Ink

Iridescent Treat Bags

Petunia Pop Iridescent Ribbon

Shimmer Star Foam Stickers

Tear & Tape

Liquid Glue

Tools:

Simply Scored

Take Your Pick Tool

Bone Folder

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.

See you next time!

Love & Hugs,

Cathryn

SPOOKY SCENE STRETCHY HALLOWEEN CHARACTER BOX with SPOOKY HALLOWEEN - Stampin' Up! Kit Box #4

Shop Stampin' Up! Here

Hi Friends!My project today is a large treat box that measures  5  x  3  x  2".  I made it to fit a large Stretchy Halloween Character.  I used the Spooky Sweet stamp set & dies Bundle, Spooky Sweet Designer Series Paper, 1 3/4" Circle Punch and Petunia Pop Iridescent Ribbon.
You can watch My Video Tutorial Here!

I started with a piece of Daffodil Delight Cardstock sized

10 1/2  x  8 1/2"

I scored the  10 1/2" side at:

3,  5,  8  and  10"

I scored the  8 1/2" side at:

1 1/2  &  6 1/2"

To cut and put the box together you can watch My Video Tutorial Here.

Below is a picture of how your Cardstock should look.

I attached several pieces of Spooky Sweet Designer Series Paper to the box.

(2)  4 3/4  x  2 3/4"  front and back

(2)  1 3/4  x  4 3/4"  long sides

(2)  2 3/4  x  1 3/4"  short sides

I attached a 3/8" Adhesive Velcro Dots on the right flap for the closure.

I stamped the Cat and Broom images onto Basic White Cardstock with Tuxedo Black Ink.

I cut the images out using the matching dies.

I colored the images with Stampin' Blends.

Light Smokey Slate  -   Cat Face, Ears, Hands and Tail

Light Bubble Bath  -  Inner Ears

Dark Pumpkin Pie  -  Shirt and Socks

Dark Fresh Freesia  -  Skirt and Socks

Dark Daffodil Delight  -  Broom

I cut the Haunted House, Fence and 2 Bats from Basic Black Cardstock using the Spooky Halloween dies.

I added some Granny Apple Green pieces behind the openings in the Haunted House with Liquid Glue.

(1)  3/8  x  2"

(1)  5/8  x  1 1/2"

I added a  4 3/4  x  3/4" piece of Granny Apple Green Cardstock to the bottom/front of the box with Liquid Glue.

I attached the Haunted House to the left/front with Dimensionals.

I cut a Moon from Daffodil Delight Cardstock using the 1 3/4" Circle Punch.

I stamped the sentiment "Spooky" onto the middle of the Moon with Tuxedo Black Ink.

I attached the Moon to the left of the House with Liquid Glue.

I attached the Fence under the Moon with Liquid Glue.

I attached the middle of the 2 Bats around the Moon with Liquid Glue.

I attached the Cat and Broom between the House and Fence with Dimensionals.

I tied a small bow with Petunia Pop Iridescent Ribbon and attached it to the Fence with 2 Glue Dots and Liquid Glue.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Spooky Halloween stamp set & dies Bundle

Spooky Sweet Designer Series Paper

1 3/4" Circle Punch

Daffodil De3light Cardstock

Granny Apple Green Cardstock

Basic Black Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

Petunia Pop Iridescent Ribbon

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Large Treat Box.

See you next time!

Love & Hugs,

Cathryn

DON'T WORRY EAT SWEETS BAT PENCIL TREAT BOX with SPOOKY HALLOWEEN - KIT PROJECT 3 - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Halloween Treat Box that measures  2 1/4  x  5 1/4  x  1".  I used the Spooky Halloween stamp set & dies Bundle, Spooky Sweet Designer Series Paper and Shimmer Star Foam Stickers.
You can watch My Video Tutorial Here!

I started with a piece of Granny Apple Green Cardstock sized

8  x  7"

I scored the  8" side at:

1,  6 1/4  and  7 1/4"

I scored the  7" side at:

1/2,  2 3/4,  3 3/4  and  6"

To cut and put the box together you can watch My Video Tutorial Here.

Below is a picture of how your Cardstock should look.

I attached several pieces of Spooky Sweet Designer Series Paper to the box.

(2)  2  x  5"  front and back

Before attaching the front piece I stamped the sentiment "Don't Worry Eat Sweets" onto the upper left side of the DSP with Tuxedo Black Ink.

(2)  3/4  x  5"  long sides

(2)  2  x  3/4"  short sides

(1)  2  x  1 1/4"  bottom of front

I stamped the Frankenstein Dog & Pumpkin onto Basic White Cardstock with Tuxedo Black Ink.

I cut the images out with the matching dies and colored them with Stampin' Blends.

Light Pecan Pie  -  Face and Hands

Light & Dark Granny Apple Green  -  Bolts, Shirt and Pants

Dark Fresh Freesia  -  Lollipop and Pumpkin

I ran Petunia Pop Bordered Ribbon around the box, where the 2 patterns of DSP meet, and tied a bow on the right side.

I attached the Frankenstein and Pumpkin Basket to the box, just above the ribbon, with Dimensionals.

I cut 2 Bats from Basic Black Cardstock using the Spooky Halloween dies.

I attached them to the box above the Frankenstein.

For the final touch I added 3 Black Shimmer Star Foam Stickers around the Bats.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Spooky Halloween stamp set & dies Bundle

Spooky Sweet Designer Series Paper

Granny Apple Green Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

Petunia Pop Bordered Ribbon

Shimmer Star Foam Stickers

Tear & TapeLiquid GlueDimensionalsTools:Simply ScoredTake Your Pick ToolCorner RounderSmall Circle Punch
Thank you for visiting my Blog today.  I hope you enjoyed my Bat Pencil Treat Box.See you next time!
Love & Hugs,Cathryn