EASY TO MAKE PINCH BOX VALENTINE TREAT BOX using WOOLLY FRIENDS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Valentine Treat Box for some Lindt Chocolate Arrows and Bubbles.  The box measures  2 3/4  x  3 3/4  x  1".  I used the Woolly Friends Stamp Set & Punch Bundle, Stylish Shapes dies, 2 3/8" Circle Punch, Three Banner Punch and the Made with Love Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized:

6 1/2  x  4 3/4"

I scored the  6 1/2" side at:

1/2,  1,  3,  3 1/2,  4  and  6"

I scored the  4 3/4" side at:

1"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 2 pieces of Made with Love Designer Series Paper to the box.

(2)  1 3/4  x  3 1/2"  front and back

I punched 2 sets of holes in the front back of the box with a 1/8" hole punch.

I ran Real Red Shiny Ribbon through the holes.

I put the Chocolate Arrow into the middle of the box, between the ribbons, and pulled them snug and tied a bow at the front of the box.

I cut out 3 different sized circles.

(1)  2 1/8" from Bubble Bath Made with Love DSP using the Stylish Shapes dies

(1)  2 1/4"  from Basic White Cardstock

(1)  2 3/8"  from Real Red Cardstock using the 2 3/8" Circle Punch

I attached the circles together, largest to smallest, with Liquid Glue.

I stamped the Sheep's Body, Head and the Bow outline onto Basic White Cardstock with Tuxedo Black Ink.

I stamped the inside of the Bow with Real Red Ink.

I cut out the images with the Woolly Friends Punch.

I colored the Sheep with Stampin' Blends.

Light Balmy Blue  -  Sheep accents

Light Bubble Bath  -  Cheeks

I attached the Sheeps Head to the body with a Dimensional and the Bow under the Head with Liquid Glue.

I attached the entire Sheep to the circles with a Dimensional on the other side of the Head and Liquid Glue on the Body.

I stamped the sentiment onto Real Red Cardstock with Tuxedo Black Ink.

I cut the image out using the Three Banner Punch.

I attached the sentiment to the Sheep with Liquid Glue.

For the final touch I added 3 Pretty In Pink Gems around the Sheep.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Woolly Friends Stamp Set & Dies Bundle

Stylish Shapes dies

2 3/8" Circle Punch

2 1/4" Circle Punch from my stash

Three Banner Punch

Made with Love Designer Series Paper

Real Red Cardstock

Basic White Cardstock

Tuxedo Black Ink

Real Red Ink

Stampin' Blends

Pretty In Pink Gems

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

1/8" Hole Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Valentine Box.

See you next time!

Love & Hugs,

Cathryn

FUN SIZED CANDY VALENTINE TREAT BOX using ENDLESS LOVE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Fun Sized Treat Box that measures  2  x  4 3/4  x  3/4".  I used the Endless Love stamp set & dies bundle, Lovely Stripes Embossing Folder and Made with Love Designer Series Paper.
You can watch My Video Tutorial here!

I started with a piece of Made with Love Designer Series Paper sized:

6  x  5 1/2"

I scored the  6" side at:

1/2,  2 1/2,  3 1/4  and  5 1/4"

I scored the  5 1/2" side at:

3/4,  4 1/4  and  4 3/4"

To cut and put the box together you can watch My Video Tutorial Here.

I embossed a  1 3/4  x  3 1/4" piece of Basic White Cardstock using the Lovely Stripes Embossing Folder.

I attached the Embossed Cardstock to the front of the box with Liquid Glue.

I stamped the word "Hugs" onto the "open Hearts" Heart with Versamark Ink.

I sprinkled it with White Embossing Powder, shook off the excess, and heated it up with a Heat Tool.

I cut 2 Bubble Bath and 2 Real Red Hearts.  I cut the inside Hearts on one of each color Hearts using another die from the Endless Love dies.

I attached the solid Heart of the opposite color underneath the "open hearts" Heart with Liquid Glue.

I attached the Pink Heart to the bottom of the box front with Liquid Glue.

I attached the Red Heart above the Pink Heart with Dimensionals.

I punched 2 sets of holes in the top flaps using the 1/8" hole punch from the Hole Punch Assortment.

I ran 1/8" Bubble Bath Faux Linen Ribbon through the holes and tied a bow at the front.

For the final touch I added 3 Real Red Delightful Decorative Dots around the front of the box.

You can shop for your Stampin' Up! supplies with Me here!

Supplies:

Endless Love stamp set & dies Bundle

Lovely Stripes Embossing Folder

Hole Punch Assortment

Made with Love Designer Series Paper

Basic White Cardstock

Bubble Bath Cardstock

Real Red Cardstock

Versamark Ink

White Embossing Powder

1/8" Bubble Bath Faux Linen Ribbon

Delightful Decorative Dots

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Heat Tool

Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Valentine Treat Box.

See you next time!

Love & Hugs,

Cathryn

BELLY BAND VALENTINE TREAT BOX using ENDLESS LOVE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Valentine Treat Box that measures  3  x  3  x  1".  I used the Endless Love dies, Stylish Shapes dies,  2 3/8" Circle Punch and Made with Love Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized:

8 1/2  x  7"

I scored the  8 1/2" side at:

1,  4,  5  and  8"

I scored the  7" side at:

1,  4  and  5"

To cut the box and put it together you can watch My Video Tutorial Here!

I attached 2 pieces of Made with Love Designer Series Paper to the front and back of the box sized:

2 3/4  x  2 3/4"

I wound a  1 1/2  x  9" piece of DSP around the box and creased where the corners were.

I sharpened the creases with my Bone Folder then attached the ends together, while around the box, with Liquid Glue.

I cut a  2 1/2" circle from Silver Foil paper using the Stylish Shapes dies.

I cut a  2 3/8" circle from striped pattern Made with Love DSP using the 2 3/8" Circle Punch.

I cut a Heart from the same DSP pattern as the Belly Band using the Endless Love dies and attached it to the middle of the smaller circle with Dimensionals.

I attached the 2 circles together with Liquid Glue.

I attached the circles to the Belly Band with Liquid Glue and slid it onto the box with the flap in the front.

I tied a double bow with 1/8" Bubble Bath Faux Linen Ribbon and attached it to the Heart with a Glue Dot and Liquid Glue.

For the final touch I added 3 Rhinestone Basic Jewels to the lower left of the smaller circle.

You can purchase your Stampin' Up! supplies with Me here!

Supplies:

Endless Love dies

2 3/8" Circle Punch

Stylish Shapes dies

Made with Love Designer Series Paper

Real Red Cardstock

Silver Foil Paper

1/8" Bubble Bath Faux Linen Ribbon

Rhinestone Basic Jewels

Tear & Tape

Liquid Glue

Glue Dots

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Belly Band Box.

See you next time!

Love & Hugs,

Cathryn

2 from 1 SHEET VALENTINE'S TREAT BOX using VALENTINE KISSES - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Box for a Bear KitKat.  You can get 2 from 1 sheet of Cardstock.  The box measures  2  x  3 1/2  x  1/2".  I used the Valentine Kisses Bundle and Made with Love Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized:

9 1/2  x  4"

I scored the  9 1/2" side at:

1 1/2,  2,  5 1/2  and  6"

I scored the  4" side at:

1/2,  1,  3  and  3 1/2"

To cut and put the box together you can watch My Video Tutorial Here.

I attached 4 pieces of Made with Love Designer Series Paper to the box.

(3)  1 3/4  x  3 1/4"  front and back of flap and the back

(1)  1 3/4  x  1 1/4"  inner bottom

I stamped the large and small Bears onto Basic White Cardstock with Tuxedo Black Ink.

I cut the out using the matching dies and colored them with Stampin' Blends.

Light and Dark Pecan Pie  -  Large Bear

Dark Bubble Bath  -  Large Bear's Inner Ears

Light & Dark Crumb Cake  -  Small Bear

I cut 2 of the Scalloped strips out of Basic White Cardstock and attached them to the top/front of the box with Liquid Glue.

I stamped the sentiment onto a 5/8" high piece of Basic White Cardstock with Real Red Ink.

I cut the Cardstock down to fit the DSP width and attached it to the bottom/front with Liquid Glue.

I tucked the Small Bear & Heart (cut from Real Red Cardstock) into the Slit in the middle of the Large Bear.

I attached the Bear to the front of the box with Dimensionals.

I added a set of 3/8" Adhesive Velcro Dots to the inside of the box for the closure.

I wound a double strand of White Baker's Twine under the top of the box and tied a bow any the top.

For the final touch I added 3 Rhinestone Basic Jewels to the front of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Valentine Kisses stamp set & dies Bundle

Made with Love Designer Series Paper

Real Red Cardstock

Basic White Cardstock

Tuxedo Black Ink

Real Red Ink

Stampin' Blends

White Baker's Twine

Rhinestone Basic Jewels

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

3/8" Adhesive Velcro Dots

Thank you for visiting my blog today.  I hope you enjoyed my Valentine's Day Treat Box.

See you next time!

Love & Hugs,

Cathryn

MINI TWIX BOOK TREAT BOX - 3 FROM 1 SHEET - using ENDLESS LOVE BUNDLE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a treat holder for a Mini Twix Candy Bar.  The box measures  2 3/4  x  3 1/2  x  3/4".  I used the Endless Love stamp set & dies Bundle, Valentine Kisses stamp set and Made with Love Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized:

6 1/4  x  3 1/2"

I scored the  6 1/4" side only at:

2 3/4  and  3 1/2"

To cut and put the box together you can watch My Video Tutorial Here.

I flattened the Cardstock and cut to the first scoreline on the longer side about 1 1/4" from each side.

I pushed the cut piece to the inside of the treat holder to make a spot for the Twix to slip in.

I cut the Scribble Heart, Large Heart, Medium  and Small Hearts out of Real Red Cardstock using the Endless Love dies.

I cut the Arrow from Silver Glitter Paper.

I put the Arrow through the Scribble Heart and attached it to the front of the box with Dimensionals and Mini Dimensionals.

I added some of the Cut Out Hearts around the Scribble Heart with Liquid Glue.

I stamped the sentiment "Happy Valentine's Day", from Valentine Kisses stamp set, onto a 3/8" high strip of Basic White Cardstock with Real Red Ink.

I cut the sentiment out by hand and attache dit to the bottom/front of the box with Liquid Glue.

I stamped the group of Hearts, from Endless Love stamp set, onto the inside of the Box with Real Red Ink.

I punched a hole in the front and back right edge of the box with a punch from the Hole Punch Assortment.

I ran Bubble Bath Faux Linen Ribbon through the holes and tied a bow.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Endless Love stamp set & dies Bundle

Valentine Kisses stamp set

Hole Punch Assortment

Made with Love Designer Series Paper

Real Red Cardstock

Basic White Cardstock

Silver Glitter Paper

Real Red Ink

Bubble Bath FAux Linen Ribbon

Liquid Glue

Dimensionals

Mini Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Valentine Box.

See you next time!

Love & Hugs,

Cathryn

VALENTINE'S DAY FOLD OVER TREAT BOX using ENDLESS LOVE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Valentine Treat Box that measures  3 3/4  x  3 3/4  x  1".  I used the Endless Love stamp set & dies Bundle and Made with Love Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized:

11  x  7 3/4"

I scored the  11" side at:

3 1/4,  4 1/4,  8  and  9"

I scored the  7 3/4" side at:

1,  2,  5 3/4  and  6 3/4"

To cut and put the box together you can watch My Video Tutorial Here.

I attached several pieces of Made with Love Designer Series Paper to the box.

(2)  3  x  3 1/2"  front and back of larger flap

(2)  1 3/4  x  3 1/2"  front and back of smaller flap

(4)  3/4  x  3 1/2"  sides

I closed the box with 2 sets of 3/8" Adhesive Backed Velcro Dots.

I cut a large Heart from Bubble Bath Cardstock using the Endless Love dies.

I stamped the upper left and bottom of the Heart with the "group of Hearts stamp" using Bubble Bath Ink.

I stamped the word "VALENTINE'S" onto Basic White Cardstock with Real Red Ink.

I cut the sentiment out by hand and flagged the ends.

I stamped "Happy and Day" sentiments, above and below where the Valentine word will be, with Real Red Ink.

I attached the Valentine word onto the Heart with Dimensionals.

I cut the large Arrow from Real Red Cardstock.

I cut the edges off and attached them to the Heart with Liquid Glue.

I attached the Heart to the larger flap with Liquid Glue.

I tied a bow with Red & White Baker's Twine and attached it to the middle top of the Heart with a Glue Dot.

For the final touch I added 3 Pretty In Pink Gems around the Heart.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Endless Love Bundle

Made with Love Designer Series Paper

Real Red Cardstock

Bubble Bath Cardstock

Basic White Cardstock

Real Red Ink

Bubble Bath Ink

Red & White Baker's Twine

Pretty In Pink Gems

Liquid Glue

Dimensionals

Glue Dots

Tools:

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you liked my Valentine project.

See you next time!

Love & Hugs,

Cathryn

VALENTINE CANDY TEST TUBE TREAT HOLDER using ENDLESS LOVE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Valentine Treat Box that holds a Cardy Test Tube.  The box measures  2  x  3  x  2".  I used the Endless Love stamp set & dies Bundle,  Lovely Stripes Embossing Folder and Made with Love Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized:8 1/2  x  8"I scored the  8 1/2" side at:2,  4,  6  and  8"I scored the  8" side at:2,  5  and  7"To cut and put the box together you can watch My Video Tutorial Here.

I attached 4 pieces of Make with Love Designer Series Paper to the box.

(4)  1 3/4  x  2 3/4"  sides

I used a 1 1/4" Circle Punch to make the hole in the top for the Test Tube to go in.

I stamped the scribble Heart onto Basic White Cardstock with Bubble Bath Ink.

I stamped the sentiment "Hugs & Kisses" onto the right side of the Heart with Real Red Ink.

I cut the Tag Heart out of Bubble Bath Cardstock using the Endless Love dies.

I stamped the group of Hearts image onto the middle of the Bubble Bath Heart with Bubble Bath Ink.

I stamped the To: and From: onto the left side of the Heart with Tuxedo Black Ink.

I cut the outlines Heart from Real Read Cardstock.

I nested the Bubble Bath Scribble Heart into the left side of the Real Red Heart and attached them together with Dimensionals on the Back.

I cut a 2 1/2" circle from Real Red Cardstock using the Stylish Shapes dies.

I cut a  2 3/8" circle from a piece of  Bubble Bath Splash of Sparkles DSP using the 2 3/8" Circle Punch.

I embossed the Bubble Bath Circle using the Lovely Stripes Embossing Folder.

I attached the 2 circles together with Liquid Glue.

I attached the Hearts onto the circles with Dimensionals and Liquid Glue.

I cut some small Hearts from Real Red Cardstock and attached them around the Larger Hearts with Liquid Glue, then added some Wink of Stella Glitter to them.

I put the Candy Tube into the box and wrapped it in a Cellophane Bag.

I tied the bag with some Red & White Baker's Twine.

I added the Heart Tag onto the Baker's Twine end and tied a bow.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Endless Love stamp set & dies bundle

Stylish Shapes dies

Lovely Stripes Embossing Folder

1 1/4" Circle Punch

2 3/8"  Circle Punch

Made with Love Designer Series Paper

Splash of Sparkles Designer Series Paper

Real Red Cardstock

Bubble Bath Cardstock

Basic White Cardstock

Bubble Bath Ink

Real Red Ink

Tuxedo Black Ink

Red & White Baker's Twine

Wink of Stella

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Valentine project.

See you next time!

Love & Hugs,

Cathryn