CONSTRUCTION TRUCK TREAT BOX with TRACTOR & CO. - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Truck Treat Box that measures  3 1/2  x  3 1/2  x  1 3/4".  I used the Tractor & Co. stamp set & dies Bundle, Spotlight on Nature dies and Floral Delight & Subtles Designer Series Papers.
You can watch My Video Tutorial Here!

I started with a piece of Pool Party Cardstock sized:

11  x  7"

I scored the  11" side at:

1 3/4,  5 1/4,  7  and  10 1/2"

I scored the  7" side at:

1 3/4  and  5 1/4"

To cut and put the box together you can watch My Video Tutorial Here.

Below is a picture of how your Cardstock should look when you are done.

I attached 6 pieces of Floral Delight Designer Series Paper to the box.

(2)  3 1/4  x  3 1/4"  front and back

(4)  1 1/2  x  3 1/4"  all sides

I cut the Truck out using the Tractor & Co. dies.

Lemon Lolly Cardstock  -  Body of Truck

Daffodil Delight Cardstock  -  Fenders and roof

Basic Black  Cardstock  -  Tires, Seat and Steering Section

Smokey Slate Cardstock  -  Hub Caps

I cut out  (2) 2 3/4" circles using the Spotlight on Nature dies.

One from Basic White Cardstock and one from Subtles Pool Party DSP.

I attached them together with Liquid Glue.

I attached the Roof and Body of the truck to the circles with Liquid Glue.

Then, I attached the Tires with Dimensionals.

I tied Darling Duckling Faux Linen Ribbon around the box and tied a bow at the top.

I attached the entire piece to the front of the box, over the ribbon, with Dimensionals.

I stamped the sentiment onto a 3/8" high piece of Pool Party Cardstock with Tuxedo Black Ink.

I slant cut the ends of the sentiment by hand and attached it to the box with a piece of Dimensional and Liquid Glue.

For the final touch I added 3 Pool Party Party Dots to the front of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Tractor & Co. stamp set & dies Bundle

Spotlight on Nature dies

Subtles Designer Series Paper

Floral Delight Designer Series Paper

Pool Party Cardstock

Lemon Lolly Cardstock

Darling Duckling Cardstock

Smokey Slate Cardstock

Basic Black Cardstock

Basic White Cardstock

Tuxedo Black Ink

Darling Duckling Faux Linen Ribbon

Party Dots

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Silicone Mat

Thank you for visiting my Blog today.  I hope you enjoyed my Treat Box.

See you next time!

Love & Hugs,

Cathryn

TRACTOR & CO. SEED PACKET BOX - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!Today I used the new Online Exclusive set Tractor & Co., available in July, to make a treat box that measures  4 1/2  x  3 1/4  x  1".  I also used the Textured Notes dies, Subtles and Regals Designer Series Papers.
You can watch My Video Tutorial Here!

I started with a piece of Balmy Blue Cardstock sized:

9 1/2  x  8 1/2"

I scored the  9 1/2" side at:

1,  4 1/4,  5 1/4  and  8 1/2"

I scored the  8 1/2" side at:

1,  2,  6 1/2  and  7 1/2"

To cut and put the box together you can watch My Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Designer Series Paper to the box.

Subtles DSP Balmy Blue

(1)  4 1/4  x  1 3/4"  front/top

(1)  4 1/4  x  3/4"  top long side

(2)  3/4  x  3"  short sides

Regals DSP Old Olive

(1) 4 1/4  x  1 1/2"  front/bottom

(1)  4 1/4  x  3/4"  bottom long side

I stamped images onto Basic White Cardstock.

Tractor and Trailer  -  Real Red Ink

1 Large and 3 Small Wheels  -  Smokey Slate Ink

Haystack  -  Daffodil Delight Ink

Chicken  -  Pumpkin Pie Ink

I cut the images out using the matching dies.

I attached the Wheels and Haystack to the Tractor and Trailer with Liquid Glue.

I attached the Trailer to the upper/left of the box front with Liquid Glue.

I attached the Tractor with Dimensionals.

I attached the Chicken to the Tractor with a Dimensional.

I stamped the sentiment "HAY" three times onto Basic White Cardstock with Daffodil Delight Ink.

I cut the sentiment out using a die from the Textured Notes dies.

I attached it to the upper right/front of the box, with some hanging off the right side, with Liquid Glue.

I cut the excess off the right side.

For the final touch I added 3 Peach Pie In Color Flat Pearls to the Tractor and Haystack.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Tractor & Co. stamp set & dies Bundle  -  Available in July

Textured Notes dies

Subtles & Regals Designer Series Papers

Balmy Blue Cardstock

Basic White Cardstock

Real Red Ink

Smokey Slate Ink

Daffodil Delight Ink

Real Red Ink

Pumpkin Pie Ink

2024-26 In Color Flat Pearls

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Silicone Mat

Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Tractor Box.

See you next time!

Love & Hugs,

Cathryn

LARGE FLOWER TRIANGLE TREAT BOX with CONEFLOWER CELEBRATIONS - Stampin' Up!

Shop Stampin' Up! Here


Hi Friends!My project today is a triangular treat box that measures  4  x  3  x  1 1/4".  I used the Coneflower Celebrations stamp set & dies Bundle, Floral Impressions Designer Series Paper and 2024-2026 In color Flat Pearls.
You can watch My Video Tutorial Here!

I started with a piece of Bubble Bath Cardstock sized:11  x  6 1/4"I scored the  11" side at:1 1/4,  5 1/4,  6 1/2  and  10 1/2"I scored the  6 1/4" side at:1 1/4  and  4 1/4"To cut and put the box together you can watch my Video Tutorial Here.

I attached 4 pieces of the Floral Impressions Designer Series Paper to the box.

(2)  3 3/4  x  2 3/4"  front and back

(2)  3 3/4  x  1 3/4"  front and back of back flap.

I cut 2 of the flower (with petals) out of Bubble Bath Cardstock using the Coneflower Celebrations dies.

I cut the Flower Top out of Daffodil Delight Cardstock.

For the back Flower I cut off one of the Petals on the right side and cut down the Flower Top.

I attached the 2 Flower Pieces together, offset by one petal, with Liquid Glue.

I attached the Daffodil Delight Top onto the top of the Flowers with Liquid Glue.

I tied Iridescent Striped Ribbon around the middle of the box and tied a bow at the top.

I attached the Flower to the front of the box, over the ribbon, with Dimensionals.

I stamped the sentiment onto a 1/2" high strip of Pool Party Cardstock with Tuxedo Black Ink.

I cut the sentiment out by hand, slanting the right side, and attached it to the box with Liquid Glue.

I added some Wink of Stella Glitter onto some of the Petals and for the final touch I added 3 Pink 2024-2026 In Color Flat Pearls to the Flower.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Coneflower Celebrations stamp set & dies Bundle

Floral Impressions Designer Series Paper

Bubble Bath Cardstock

Daffodil Delight Cardstock

Pool Party Cardstock

Tuxedo Black Ink

Iridescent Striped Ribbon

2024-2026 In Color Flat Pearls

Wink of Stella

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my box.

See you next time!

Love & Hugs,

Cathryn

FLOWER TOPPED TREAT BOX with CONEFLOWER CELEBRATIONS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box that measures  2 3/4  x  5 1/4  x  1 1/4".  I used the Coneflower Celebrations stamp set & dies Bundle and Timeless Plaid Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Thick Basic White Cardstock sized:

8 1/2  x  5 3/4"

I scored the  8 1/2" side at:

1/2,  1 3/4,  4 1/2  and  5 3/4"

I scored the  5 3/4" side at:

1 1/4  and  5 1/4".

To cut and put the box together you can watch My Video Tutorial Here.

Below is a picture of how your Cardstock should look when you are done.

I attached 2 pieces of the Timeless Plaid Designer Series Paper to the box.

(2)  2 1/2  x  3 3/4"  front and back

I stamped the Coneflower onto Thick Basic White Cardstock with Tuxedo Black Ink.

I cut the flower out using the Double Flower die.

After cutting I stamped the Coneflower on the back side of the die cut.

I colored the Flowers with Stampin' Blends.

Dark Pecan Pie  -  Flower Top

Light and Dark Daffodil Delight  -  Flower Petals

I attached the Back Flower to the 1/2" back flap with Liquid Glue.

After the back was dry I added 3 sets of 3/8" Adhesive Backed Velcro Dots to the sides and off center (on back of front flower) for the closure.

I stamped the sentiment onto Basic White Cardstock with Tuxedo Black Ink.

I cut the sentiment into a rectangle.

I cut the Circles Border from Basic White Cardstock.

I place the sentiment strip halfway down the circles strip and attached it with Liquid Glue.

I cut the excess off of Each end and attached the sentiment to the box with Dimensionals.

I tied a bow with 2 strands of White Baker's Twine and attached it above the sentiment with a Glue Dot and Liquid Glue.

For the final touch I added 3 Daffodil Delight Muted Palette Dots around the sentiment.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Coneflower Celebrations stamp set & dies Bundle

Timeless Plaid Designer Series Paper

Thick Basic White Cardstock

Basic White Cardstock

Old Olive Cardstock

Stampin' Blends

White Baker's Twine

Muted Palette Dots

Tear & Tape

Liquid Glue

Dimensionals

Glue Dots

3/8" Adhesive Velcro Dots

Tools:

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my box.

See you next time!

Love & Hugs,

Cathryn

WHISKEY & COASTERS FATHER'S DAY TWIN BOX with CHEERS & SIPS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is 2 boxes I attached together for some Whiskey and Coasters.  It measures  5 1/4  x  4  x  1 1/4".  I used the Cheers & Sips stamp set & dies Bundle, Stylish Shapes dies, Spotlight on Nature dies and Celebratory Sips Designer Series Paper.
You can watch My Video Tutorial Here!

I started with the large box.

11  x  5 1/4"

I scored the  11" side at:

1 1/4,  5 1/4,  6 1/2  and  10 1/2"

I scored the  5 1/4" side at:

1 1/4"

To cut, add the DSP on and put the box together you can watch My Video Tutorial Here.

Below is a picture of how your Cardstock should look.

Next I did the small box.

5 1/2  x  5 1/4"

I scored the  5 1/2" side at:

1/2,  1 3/4,  3  and  4 1/4"

I scored the  5 1/4" side at:

1 1/4"

Below is a picture of how your Cardstock should look.

I attached several pieces of the Celebratory Sips Designer Series Paper to the boxes.

(2)  3 3/4  x  3 3/4"  front and back of big box

(4)  1  x  3 3/4"  as seen in above pictures

(1)  1  x  1"  bottom of small box

I stamped the Glass and Ice images onto Basic White Cardstock with Tuxedo Black Ink.

I used a Blender Brush and some Daffodil Delight Ink to blend the bottom 2/3 of the glass.

I stamped the Sprig and Orange onto Basic White Cardstock with Tuxedo Black Ink.

I cut the Glass, Sprig and Orange out using the matching dies.

I colored the image with Stampin' Blends.

Light Old Olive  -  Sprig

Light & Dark Pumpkin Pie  -  Orange

I cut the Orange along one of the Slices and attached it to the Glass with Liquid Glue.

I also Attached the Sprig onto the Glass with Liquid Glue.

I cut a  2 1/2" circle from the Celebratory Sips DSP using the Stylish Shapes dies.

I cut a  2 3/4" circle from Daffodil Delight Cardstock using the Spotlight on Nature dies.

I attached the circles together with Liquid Glue.

I attached the Images to the Circle with Dimensionals.

I tied Darling Duckling Ribbon around the middle of the large box and tied a bow on the left.

I attached the two boxes together with Liquid Glue.

I cut a label from Daffodil Delight Cardstock using the Stylish Shapes dies.

I stamped the sentiment onto the middle of the label with Tuxedo Black Ink.

I attached the label onto the smaller box with Liquid Glue.

For the final touch I added 2 Mossy Meadow Muted Palette Dots onto either side of the label.

You can shop for all your Stampin' Up! supplies with Me here.

Supplies:

Cheers & Sips stamp sent & dies Bundle

Stylish Shapes dies

Spotlight on Nature dies

Celebratory Sips Designer Series Paper

Old Olive Cardstock

Daffodil Delight Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

2 3/8" Circle Punch

1" Circle Punch

Darling Duckling Faux Linen Ribbon

Muted Palette Dots

Tear & Tape

Liquid Glue

Dimensionals

Tools:

Simply Scored

Take Your Pick Tool

Blending Brush

Thank you for visiting my Blog today.  I hope you enjoyed my Father's Day Box.

See you next time!

Love & Hugs,

Cathryn

ICE POP HOLDER TREAT BOX with CHEERS & SIPS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box for some Ice Pop Holders I made for my family.  It measures  2 3/4  x  7  x  1".  I used the Cheer & Sips stamp set & dies Bundle,  Choose Happy stamp set, Textured Notes dies and Celebratory Sips Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Strawberry Slush Cardstock sized:

10  x  8"

I scored the  10" side at:

1,  8  and  9"

I scored the  8" side at:

1,  3 3/4,  4 3/4  and  7 1/2"

To cut and put the box together you can watch My Video Tutorial Here.

Below is a picture of how your Cardstock should look when you are done.

I attached several pieces of Celebratory Sips Designer Series Paper to the box.

(1)  2 1/2  x  5"  top front

(1)  2 1/2  x  2 1/4"  bottom front

(1)  2 1/2  x  6 3/4"  back

(2)  3/4  x  6 3/4"  long sides

(2)  2 1/2  x  3/4"  short sides

I stamped the fruit images, from Cheers & Sips stamp set, onto Basic White Cardstock with Tuxedo Black Ink.

I stamped  1 Lemon Slice,  2 Strawberries,  3 Blackberries and  2 Sprigs of Greenery.

I cut the images out using the matching dies.

I colored the images with Stampin' Blends.

Light & Dark Darling Duckling  -  Lemon Slice

Light Strawberry Slush  -  Strawberries

Light Blackberry Bliss  -  Blackberries

Light Old Olive  -  Greenery

I cut a  2 1/4  x  3 3/4"  Rectangle from Basic White Cardstock using the Textured Notes dies.

I stamped the sentiment "Happy Summer", from Choose Happy stamp set,  onto the upper right of the Rectangle with Old Olive Ink.

I attached the Sprigs to the Rectangle first with Liquid Glue.

Next the Cherries with Mini Dimensionals.

Then the Strawberries and Blackberries.

I attached the entire piece to the top/front of the box with Dimensionals.

I tied Strawberry Slush Faux Linen Ribbon around the bottom of the box, where the 2 patterns of DSP meet, and tied a bow in the middle.

I added some Wink of Stella Glitter to the Lemon sections and for the final touch I added 3 Strawberry Slush Gems around the Fruit.

You can shop for your Stampin' Up! Supplies with Me here.

Supplies:

Cheer & Sips stamp set and dies bundle

Textured Notes dies

Celebratory Sips Designer Series Paper

Choose Happy Stamp set

Strawberry Slush Cardstock

Basic White Cardstock

Tuxedo Black Ink

Old Olive Ink

Stampin' Blends

Strawberry Slush Faux Linen Ribbon

Strawberry Slush Gems

Tear & Tape

Liquid Glue

Dimensionals

Mini Dimensional

Tools:

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoy my long treat box.

See you next time!

Love & Hugs,

Cathryn

DOUBLE TREAT BOOK BOX with EXTRAORDINARY FLORA - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a box that will fit a treat in each side.  It measures  3  x  4 1/4  x  1 1/2".  I used the Extraordinary Floral stamp set & dies Bundle, Stylish Shapes dies and Subtles Designer Series Paper.
You can watch My Video Tutorial Here!

I started with a piece of Soft Seafoam Cardstock sized

10 5/8  x  7 1/4"

I scored the  10 5/8" side at:

3/4,  1 1/2,  4 1/2,  6 1/8,  9 1/8  and  9 7/8"

I scored the  7 1/4" side at:

3/4,  1 1/2,  5 3/4  &  6 1/2"

To cut and put the box together you can watch My Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I added 2 pieces of Soft Seafoam Cardstock to the inside sized:

(2)  3  x  4 1/4"

I attached several pieces of the Subtles Designer Series Paper to the box.

(4)  2 3/4  x  4"  front, back and 2 inside pieces

(1)  1 3/8  x  4"  outside binding

(2)  1/2  x  4"  long sides

(4)  2 3/4  x  1/2"  short sides

I stamped the entire image of the flowers onto Basic White Cardstock with Tuxedo Black Ink.

I cut them all out at once with the matching die.

I picked 3 Flower pieces and 2 extra Leave Stems.

I colored the images with Stampin' Blends.

Light & Dark Strawberry Slush  -  Flowers

Dark Soft Seafoam & Light Old Olive  -  Leaves

Dark Daffodil Delight  -  Middle of Flowers

I cut out a  2 1/2" circle from Basic White Cardstock using the Stylish Shapes dies.

I attached the smaller Flowers and Leaves with Liquid Glue.

I attached the Large Flower and Leaves with Dimensionals.

I stamped the sentiment "With Love" onto to right side of the Circle with Tuxedo Black Ink.

I attached the circle to the upper/front of the box with Dimensionals.

I added 2 sets of  3/8" Adhesive Velcro Dots inside the box for the closure.

I tied a bow with Strawberry Slush Faux Linen Ribbon and attached it under the circle with a Glue Dot and some Liquid Glue.

I added some Wink of Stella Glitter to the Flowers and for the final touch I added 3 Strawberry Slush Gems around the sentiment.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Extraordinary Flora stamp set & dies Bundle

Stylish Shapes dies

Subtles Designer Series Paper

Soft Seafoam Cardstock

Basic White Cardtock

Tuxedo Black Ink

Stampin' Blends

Strawberry Slush Faux Linen Ribbon

Strawberry Slush Gems

Wink of Stella

Liquid Glue

Dimensionals

Glue Dots

Tools:

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Double Treat Box.

See you next time!

Love & Hugs,

Cathryn