HELLO LADYBUG MINI GIFT TOTE with a FLOWER USING the LADYBUG BUILDER PUNCH - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Mini Gift Tote that measures

4 1/2  x  3  x  1 1/2".  I made the Flower for the bag using the Wings from the Ladybug Builder Punch.  I also used Hello Ladybug stamp set, Pansy Patch stamp set, Pansy Petals Designer Series Paper and the Layering Circle dies.

You can watch my Video Tutorial Here!

I started with a piece of Pansy Petals Designer Series Paper sized

4 1/2  x  9 1/2".

I scored the 4 1/2" side at:

1 1/2".

I turned the paper 1/4 turn so the horizontal scored line is closer to the top.

I scored it only to the first scoreline at:

1 1/2,  4 1/2,  6  and  9".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of what your DSP should look like after scoring and cutting.

I cut 2 pieces of Soft Succulent Cardstock to  1/2  x  5 1/2"  for the handles.

I put Stampin' Seal+ onto the last 1/2" of each side of the pieces.

I attached the handles to both sides of the tote about 1" from the sides.

To make the flower I cut 7 or 8 Petals (wings) from Blushing Bride Cardstock using the Ladybug Builder Punch.

I attached them together with Liquid Glue by layering them in a circle.

I cut a 1 1/8" circle from Pale Papaya Cardstock using

the Layering Circle dies.

I embossed the circle using the Dots Embossing Folder.

I attached the circle to the middle of the flower with Liquid Glue.

To see how I did it you can watch my Video Tutorial Here.

I stamped the Ladybug, from Hello Ladybug stamp set, onto Basic White Cardstock.

I stamped the body with Tuxedo Black Ink and I stamped the wings with Fresh Freesia Ink.

I cut them out using the Ladybug Builder Punch.

I stamped the sentiment, from Pansy Patch stamp set, onto a 1/2" strip of Fresh Freesia Cardstock using Tuxedo Ink.

I cut the sentiment edges out by hand.

I attached the Flower to the front of the tote with Liquid Glue.

I attached the Ladybug to the side of the Flower with Dimensionals.

I tied a bow with Fresh Freesia Open Weave Ribbon and attached it the the bottom of the left-front handle with a Glue Dot.

I cut the ends of the sentiment by hand and attached it under the edge of the bow with a Glue dot.

For the final touch I added 3 Iridescent Rhinestone Basic Jewels to the Flower.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Hello Ladybug stamp set

Ladybug Builder Punch

Pansy Patch stamp set

Pansy Petals Designer Series Paper

Layering Circle dies

Blushing Bride Cardstock

Soft Succulent Cardstock

Pale Papaya Cardstock

Fresh Freesia Cardstock

Basic White Cardstock

Tuxedo Black Ink

Fresh Freesia Ink

Dots and Checks Embossing Folders

Fresh Freesia Open Weave Ribbon

Iridescent Rhinestone Basic Jewels

Stampin' Seal+

Tear and Tape

Liquid Glue

Glue Dots

Simply Scored

Take Your Pick Tool

Stampin' Pierce Mat

Silicone Mat

Thank you for visiting my Blog today!  I hope you enjoyed my Ladybug and Flower Tote.

See you next time.

Love and Hugs,

Cathryn

FLOWERING TULIPS SPRING BOX with FLOWERING FIELDS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

 My project today is a slender box that measures  5 1/4  x  1 1/2  x  1".  You can make 2 of these boxes from one sheet of Cardstock.  I used Flowering Tulips stamp set, Tulips dies, Flowering Fields Designer Series Paper and Iridescent Rhinestone Basic Jewels.

You can watch my Video Tutorial Here!

I started with a piece of Poppy Parade Cardstock sized

7 3/4  x  5 1/2".

I scored the  7 3/4" side at:

1/2,  1 1/2  and  6 3/4".

I scored the  5 1/2" side at:

1,  2 1/2,  3 1/2  and  5".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of my template.  Your Cardstock should look like this after scoring, cutting and rounding the corners of the flap with the Detail Trio Punch.

I attached 4 pieces of Flowering Fields Designer Series Paper to the box.

(2)  1 1/4  x  5"  for the front and back.

(2)  3/4  x  5"  for the sides.

I attached the DSP to the box with Liquid Glue.

I cut the Tulip pieces from Poppy Parade Cardstock and the Stems and Leaves from Pear Pizzazz Cardstock using the Tulips dies.

I inked the edges of the Tulips with Real Red Ink.

I inked the edges of the Leaves with Mossy Meadow Ink.

I assembled the tulips with Liquid Glue.

You can watch my Video Tutorial to see how they go together.

I put the tulips, leaves and stems onto the box and arranged them how I thought they looked nice.

I used Liquid Glue to attached the Tulips first, then right away I stuck the two stems underneath the Tulips.

I arranged the leaves on top of the stems with Liquid Glue also.

I stamped the sentiment, from Flowering Tulips stamps set, onto Pear Pizzazz Cardstock with Tuxedo Black Ink.

I cut the tag down leaving about 1/2" on either side of the sentiment.

I cut both ends of the sentiment piece using the Banners Pick a Punch.

I tied a bow with Bumblebee Gingham Ribbon and attached it to the leaves with Glue Dots.

I tucked the sentiment under the bow with a Glue Dot also.

For the final touch I added an Iridescent Rhinestone Basic Jewel to each Tulip and one to the end of the sentiment.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Flowering Tulips stamp set

Tulips dies

Flowering Fields Designer Series Paper

Banners Pick a Punch

Detail Trio Punch

Poppy Parade Cardstock

Pear Pizzazz Cardstock

Real Red Ink

Mossy Meadow Ink

Tuxedo Black Ink

Bumblebee 1/4" Gingham Ribbon

Iridescent Rhinestone Basic Jewels

Tear and Tape

Liquid Glue

Glue Dots

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today!  I hope you enjoyed my Tulip Box.

See you next time.

Love and Hugs,

Cathryn

HAPPY HEDGEHOGS TRIANGLE WINDOW BOX with the HEDGEHOG BUILDER PUNCH - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Triangle Window Box that Measures

5  x  2 1/4  x  2".  I put Chocolate Foil Eggs inside.  I used Happy Hedgehogs stamps set, the Hedgehog Builder Punch, Rectangle Stitched dies, Layering Circle dies, the Gingham Embossing Folder and Pansy Petals Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Highland Heather Cardstock

sized  9 1/2  x  8 1/2".

I scored the  9 1/2" side at:

2 1/4   and  7 1/4".

I scored the  8 1/2" side at:

2 1/4,  4 1/2  and  6 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of my Template.  Your Cardstock should look like the template after scoring and cutting.

Before putting the box together I attached 1 piece of Pansy Petals Designer Series Paper (4 3/4  x  2")

to the rectangle, that will be the the front of the box. (The rectangle that has the markings above).  I attached the DSP to the Cardstock with Stampin' Seal.

I cut the window area out of that rectangle using the Rectangle Stitched dies.  I placed the die 5/8" from the right side of the rectangle.

Then I added a piece of Window Sheet, sized 2  x  2 1/2", to the inside covering the cut out window.

I put the box together with Tear and Tape.

I attached 2 more pieces of Pansy Petals DSP to the box.

Another piece sized  4 3/4  x  2"  for the back of the box and

one piece  4 3/4  x  1 1/2"  for the back flap.

I attached two 3/8" Adhesive Backed Velcro Dots to the back flap for the closure.

I stamped the Hedgehog, from Happy Hedgehogs stamp set, onto Basic White Cardstock with Tuxedo Black Ink.

I colored the Hedgehog with Stampin' Blends.

Light Flirty Flamingo for the Ear.

Light Crumb Cake for the rest of the Hedgehog.

I cut the Hedgehog out with the Hedgehog Builder Punch.

I cut a 1 7/8" circle from Soft Sea Foam Cardstock using the Layering Circle dies.

I embossed the circle using the Gingham Embossing Folder.

I cut a scalloped circle from Highland Heather Cardstock using the same die set.

I attached the 2 circles together with Liquid Glue.

I attached the Hedgehog to the circles with Dimensionals.

I attached the entire piece to the front of the box, next to the window, with Liquid Glue.

I tied a small bow with Highland Heather Grosgrain Ribbon and attached it to the bow with 3 Glue Dots.

For the final touches I added Fresh Freesia Loose Flower Flourishes to the box.

One behind the Hedgehogs ear and three around the window.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Happy Hedgehogs stamp set

Hedgehog Builder Punch

Rectangle Stitched dies

Layering Circle dies

Gingham Embossing Folder

Pansy Petals Designer Series Paper

Highland Heather Grosgrain Ribbon

Loose Flower Flourishes

Highland Heather Cardstock

Soft Seafoam Cardstock

Basic White Cardstock

Tuxedo Black Ink

Light Crumb Cake Stampin' Blend

Light Flirty Flamingo Stampin' Blend

Window Sheets

Liquid Glue

Dimensionals

Stampin' Seal

Glue Dots

Detail Trio Punch

3/8" Adhesive Velcro Dots

Hershey's Chocolate Foil Dots

Thank you for visiting my Blog today.  I hope you enjoyed my Triangle Window Box.

See you next time.

Love and Hugs,

Cathryn

KITE DELIGHT TALL COTTON CANDY TREAT BOX with CLOUD PUNCH - Stampin' Up!

Shop Stampin' Up! Here


Hi Friends!My project today is a Cotton Candy Gift Box that measures  7  x  2 1/2  x  1 1/2".  I used Kite Delight stamp set, the Cloud Punch, Sweet Hearts dies, Pansy Patch stamp set and Abstract Beauty Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a piece of Polished Pink Cardstock sized

8 1/2  x  8 1/2".

I scored the first 8 1/2" side at:

1/2,  3,  4 1/2  and  7".

I turned the Cardstock 1/4 turn and scored at:

1 1/2  and  7".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of what your Cardstock should look like after scoring and cutting.

I attached 4 pieces of Abstract Beauty Designer Series Paper to the box.

(2)  2 1/4  x  5 1/4"  for the front and back.

(2)  1 1/4  x  5 1/4"  for the sides.

I attached the DSP to the box with Liquid Glue.

I cut 3 Clouds from Basic White Cardstock using the Cloud Punch.

I embossed the Clouds using the Dots Embossing Folder.

I cut some of the sides off the Clouds and flipped 2 over to make them look different sizes.

 I attached them to the box with Liquid Glue.

I stamped the Kite, Tail and Sun images, from Kite Delight stamp set, onto Basic White Cardstock with Tuxedo Black Ink.

I colored the images with Stampin' Blends.

Light Daffodil Delight for the inside of the Flowers.

Dark Polished Pink for the Flowers.

Dark Balmy Blue for the rest of the Kite.

Dark Polished Pink for the tail ribbons.

I colored the inside of the Sun with Dark Daffodil Delight.

I alternated Dark and Light Daffodil Delight for the points of the Sun.

I fussy cut the images out by hand.

I cut a Tag from Balmy Blue Cardstock using the Sweet Hearts dies.

I attached the Sun onto the Tag with a Dimensional.

I attached the tail with 1/2 Mini Dimensionals on the bows.

I attached the Kite with Dimensionals and a dab of Liquid Glue on the end to attached the Tail.

I put my Cotton Candy into the box and punched 2 holes in the top of the box with a small hole punch.

I ran 3/4" Frayed Ribbon through the holes and tied a knot at the front.

I looped White Baker's Twine through the tag and tied it around the knot.

For the final touches I added some 2021-2023 In Color Jewels to the images.

Pale Papaya to the flowers on the Kite.

Polished Pink to the middle of the bows on the Tail.

Pale Papaya to the Sun.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Kite Delight stamp set

Cloud Punch

Sweet Hearts dies

Pancy Patch stamp set

Abstract Beauty Designer Series Paper

Polished Pink Cardstock

Balmy Blue Cardstock

Basic White Cardstock

Dots and Checks Embossing Folder

Light Polished Pink Stampin' Blend

Light and Dark Daffodil Delight Stampin' Blends

Dark Balmy Blue Stampin' Blend

3/4" White Frayed Ribbon

Tuxedo Black Ink

2021-2023 In Color Jewels

Mini Dimensionals

Dimensionals

Liquid Glue

White Baker's Twine

Small Hole Punch

3 Pack Cotton Candy - Target Dollar Spot.

Thank you for visiting my Blog today!  I hope you enjoyed my Cotton Candy Treat Box.

See you next time.

Love and Hugs,

Cathryn

EASTER FRIENDS CHOCOLATE BUNNY BOX with FLOWERING FIELDS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a slim box I made to fit 2 Hershey's Chocolate Bunnies.  It measures  4 1/2  x  3 1/2  x 1/2".  I used Easter Friends stamps set, You're a Peach stamp set, Peach dies, Beautiful Shapes dies and Flowering Fields Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Flirty Flamingo Cardstock sized

10 1/2  x  5".

I scored the  10 1/2" side at:

1/2,  5,  5 1/2  and 10".

I scored the  5" side at:

1/2  and  4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring, cutting and rounding the top flaps with the Detail Trio Punch.

I attached Flowering Fields Designer Series Paper to the box.

(2)  4 1/4  X  3 1/4"

I attached the DSP to the paper with Liquid Glue.

I punched two holes in the top flaps of the box with a small hole punch.  I put 2 Hershey's Chocolate Bunnies inside then

I ran 3/4" White Frayed Ribbon though the holes and tied a knot at the front.

I stamped the Bunny image, from Easter Friends stamp set, onto Basic White Cardstock with Crumb Cake Ink.

I colored around the Bunny with a Light Crumb Cake Stampin' Blend.

I colored the Cheeks and Nose with a little bit of a Flirty Flamingo Stampin' Blend and blended it out with the Color Lifter Stampin' Blend.

I used a Light Pool Party Stampin' Blend around the outside of the Bunny for a little bit of shadow.

I cut the top of the Bunny out with a circle die from the Beautiful Shapes dies.

I also cut another of the same circle from Mossy Meadow Cardstock.

I stamped the sentiment, from Easter Friends stamps set, onto a 5/8" high strip of Pool Party Cardstock with Tuxedo Black Ink.

I cut the label down leaving 1/4" to the left of the sentiment and 1/2" to the right.

I flagged the left side by hand.

I attached the Mossy Meadow Circle behind the Bunny Circle with Liquid Glue.

I attached it to the front of the box with Dimensionals.

I stamped the flower, from You're a Peach stamps set, onto Basic White Cardstock with Flirty Flamingo Ink.

I cut the flower and some leaves from Mossy Meadow Cardstock using the Peach dies.

I attached the leaves to the back of the flower and then onto the end of the sentiment with Glue Dots.

I attached the entire sentiment piece to the bottom-right of the box with Dimensionals and Liquid Glue.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Easter Friends stamp set

You're a Peach stamp set

Peach dies

Beautiful Shapes dies

Flowering Fields Designer Series Paper

Detail Trio Punch

Flirty Flamingo Cardstock

Basic White Cardstock

Mossy Meadow Cardstock

Pool Party Cardstock

Crumb Cake Ink

Flirty Flamingo Ink

Tuxedo Black Ink

Light Flirty Flamingo Stampin' Blend

Light Crumb Cake Stampin' Blend

Light Pool Party Stampin' Blend

Color Lifter Stampin' Blend

3/4" Frayed Ribbon

Matte Decorative Dots

Holiday Rhinestone Basic Jewels

Glue Dots

Liquid Glue

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today!  I hope you enjoyed my Chocolate Bunny Box.

See you next time.

Love and Hugs,

Cathryn

SHAMROCK WINDOW BOX with SWEETHEARTS DIES - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

For my project today I decided to make a Shamrock Window Box Treat Holder.  I used the Sweetheart dies to put together a Shamrock since Stampin' Up! doesn't have a die right now.  I also used the Seasonal Labels dies and Abstract Beauty Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Just Jade Cardstock sized  10  x  2 1/2".

I scored only the 10" side at:

1,  4 1/2,  5 1/2  and  9".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of my Template.

I attached 2 pieces of Abstract Beauty Designer Series Paper to the box.

(2)  2 1/4  x  3 1/4"

I attached the front piece of DSP to the box with Stampin' Seal BEFORE cutting the window using the Seasonal Label dies.

Then I attached the other piece of DSP to the back panel with Liquid Glue.

I attached a piece of Window Sheet to the inside of the box with Glue Dots.

(1)  3 1/4  x  2 1/4"

I put some Chocolate Gold Coins and a Peppermint Patty into a Cellophane Bag and tape the bag to the fit the bottom area of the treat holder.

I attached the Bag to the back of the Treat Holder with Stampin' Seal+.

I punched 2 small holes in the top of the box and tied Just Jade Gingham Ribbon, from the Flowers for Every Season Ribbon Combo Pack, in a bow at the front.

I made the Shamrock using dies from the Sweetheart die set.

I cut 3 hearts and the small flagged label and I cut a 7/8" circle using a punch from Just Jade Cardstock.

I attached the circle partially on top of the label covering up the flagged end with Liquid Glue.

I attached the side petals then the top.

I attached the Shamrock to the front of the box with Dimensionals.

For the final touch I added some Gilded Gems to the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Sweet Hearts dies

Abstract Beauty Designer Series Paper

Just Jade Cardstock

Seasonal Labels dies

Flowers for Every Season Ribbon Combo Pack

Gilded Gems

Window Sheets

Stampin Seal

Stampin' Seal+

Liquid Glue

Glue Dots

Detail Trio Punch

Silicone Mat

Simply Scored

Take Your Pick Tool

7/8" or Similar Circle Punch

Small Hole Punch

Cellophane Bag

Thank you for visiting my Blog today!  I hope you enjoyed my Shamrock box.

See you next time!

Love and Hugs,

Cathryn

MAKE A BUNNY with the LADYBUG BUILDER PUNCH and dies with Layering Circle dies - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Front Flap box that measures

3 1/2  x  2 3/4  x  1".  I made a Bunny Face using the Ladybug Builder Punch, Layering Circle dies, Medium Daisy Punch and Detail Trio Punch.  I love making things from a punch different then the usual use.  I also used Abstract Beauty Designer Series Paper, Easter Friends stamp set, Rectangle Stitched dies and a 1/2" circle punch.

You can watch my Video Tutorial Here!

I started with a piece of Blushing Bride Cardstock sized

10  x  5 3/4".

I scored the  10" side at:

1,  4 1/2,  5 1/2  and  9".

I scored the  5 3/4" side at:

1/2,  1 1/2,  4 1/4  and  5 1/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring, cutting and rounding the corners of one side of the side flaps with the Detail Trio Punch.

I attached 6 pieces of Abstract Beauty Designer Series Paper to the box.

(2)  3 1/4  x  2 1/2"  for the top and inside the top of the box.

(2)  3 1/4  x  3/4"  for the long sides.

(2)  2 1/2  x  3/4  for the front flap and back of the box.

I attached the DSP to the box with Liquid Glue.

I added  5/8" Adhesive Velcro Dots to the flap for the closure.

To make the bunny I cut a  1 3/8" circle from Basic White Cardstock using the Layering Circle dies.

I cut the ears from Basic White Cardstock using the wings from the Ladybug Builder Punch.

I cut a flower from Blushing Bride Cardstock using the Medium Daisy Punch.

I cut two eyes from Basic Black Cardstock using the Detail Trio Punch and the cheeks from a 1/2" circle punch.

I used my Silicone Mat and my Take Your Pick Tool to assemble the Bunny.

I cut 2 petals from the Medium Daisy and attached them to the ears.

I attached the ears to the back of the 1 3/8" circle.

I attached the two 1/2" circles, for cheeks, toward the bottom of the circle.

I attached the eyes slightly slanted about 1/8" above the cheeks.

I attached a large Adhesive Backed Hexagon for the nose.

I added dots to the cheeks and 3 eyelashes on each eye with a Basic Black Stampin' Write Marker.

I cut a 2 1/8" circle from Polished Pink Cardstock and a 2 1/4" scalloped circle from Blushing Bride Cardstock using the Layering Circle dies.

I embossed the Polished Pink Circle with the Dots Embossing Folder.

I attached them together with Liquid Glue.

I added the Bunny to the top of the circle with Dimensionals.

I stamped the sentiment, from Easter Friends stamp set, onto Basic White Cardtock with Tuxedo Black Ink.

I cut the sentiment out with a rectangle from the Rectangle Stitched dies.

I attached it to the box about 1/8" up from the bottom of the DSP with Liquid Glue.

I attached the Bunny Circle, the bottom touching the sentiment label, with Dimensionals.

I added a Loose Flower Flourish to the left ear of the Bunny with a Glue Dot.

I added some 2021-23 In Color Jewels around the sentiment and for the final touch I added Wink of Stella Glitter to the eyes.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Ladybug Builder Punch

Layering Circle dies

Medium Daisy Punch

1/2" Circle Punch

Easter Friends stamp set

Rectangle Stitched dies

Abstract Beauty Designer Series Paper

Dots and Checks Embossing Folders

Blushing Bride Cardstock

Basic White Cardstock

Basic Black Cardstock

Polished Pink Cardstock

Tuxedo Black Ink

Basic Black Stampin' Write Marker

Adhesive Backed Hexagons

2021-2023 In Color Jewels

Loose Flower Flourishes

Silicone Mat

Dimensionals

Liquid Glue

Glue Dots

Simply Scored

Take Your Pick Tool

5/8" Adhesive Velcro Dots

Thank you for visiting my Blog today!  I hope you enjoyed my cobbled together Bunny Face.

See you next time.

Love and Hugs,

Cathryn