HAPPY FOREST FRIENDS TEA LIGHT LUMINARY with KINDEST GNOMES stamp set - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Tea Light Luminary that measures  4 1/2  x  3  x  3".  I used Happy Forest Friends Designer Series Paper, Kindest Gnomes stamp set, Gnomes dies, Layering Circle dies and Celebration Tags dies.

I got my inspiration from Esther Collmar who made a treat box.  I believe she is from Germany and her website is  www.kreativpapier.com

You can watch my Video Tutorial Here!

I made this Luminary in 2 pieces.  The inside is Cardstock and the outside is Designer Series Paper.

I started with the inside.

It is a piece of Soft Seafoam Cardstock sized

6 1/4  x  3 1/2".

I scored the  6 1/4" side at:

3/4,  2 3/4,  3 1/2  and  5 1/2".

I scored the  3 1/2" side at:

3/4  and  2 3/4".

I cut a 1 5/8" circle out of one of the squares using the Layering Circle dies.

To cut and put the inside together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

Next I did the outside pieces.  You need 2 pieces of Happy Forest Friends Designer Series Paper sized

11 1/4  x  2".

I scored ONLY the 11 1/4" side at:

1,  4 1/2,  6 3/4  and  10 1/4".

There is no cutting for these pieces you just need to round the corners.

To put the Luminary together you can watch my Video Tutorial Here.

Below is a picture of how your Designer Series Paper (DSP) should look after scoring.

I attached the DSP pieces to gather at the square in the middle with Liquid glue.

I attached the Tea Light box on top of the Squares with Liquid Glue.

I punched two holes in each of the 4 ends of the DSP strips about 1/8" up from the scoreline and about 1/2" from each side.

I ran Soft Seafoam Seam Biding Ribbon around the strips, through the holes, and tied a bow at the front.

Next I stamped the Gnome, from Kindest Gnomes stamp set, onto Basic White Cardstock with Tuxedo Black Ink.

I cut the image out with the Gnomes dies.

I colored the image with

Stampin' Blends:

Light and Dark Mossy Meadow   -   Shirt and Pants

Light and Dark Soft Suede  -  Hat and Shoes

Light Smokey Slate  -  Beard

Light Flirty Flamingo   -  Top of the Nose and Mouth

Dark Petal Pink  -  Nose and Hands

I cut a rectangle from Soft Seafoam Cardstock using the Celebration Tags dies.  I attached the Gnome to it with Dimensionals.

I punched a hole in the top of the Rectangle and looped White Baker's Twine through the hole.

I tied it around the bow and tied another bow.

For the final touch I added 3 Iridescent Rhinestone Basic Jewels to the top of the front strip.

Here are some pictures of the Luminary in the Dark.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Happy Forest Friends Designer Series Paper

Kindest Gnomes stamp set

Gnome dies

Celebration Tags dies

Layering Circle dies

Soft Seafoam Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

Soft Seafoam Seam Binding Ribbon

Baker's Twine Essentials Pack

Liquid Glue

Dimensionals

Simply Scored

Take Your Pick Tool

1 1/2" Battery Powered Tea Light or similar

Corner Rounder

Hole Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Luminary.

See you next time!

Love and Hugs,

Cathryn

BACK FLAP HALLOWEEN TREAT BOX with BEST WITCHES STAMP SET - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Halloween Treat Box that measures  4  x  3 1/4  x  2".  I used Best Witches stamp set, Scary Silhouettes dies, Stylish Shapes dies, Black & White Designs Designer Series Paper and Brights Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Basic Black Cardstock sized

11  x  7 1/4".

I scored the  11" side at:

1/2,  3 3/4,  5 3/4  and  9".

I scored the  7 1/4" side at:

2  and  6".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring, cutting and rounding the corners of the back flap.

I attached two different types of DSP to the box.

Black & White Designs Designer Series Paper:

(2)  3  x  3 3/4"  for the front and back.

Brights, Gorgeous Grape, Designer Series Paper:

(2)  1 3/4  x  3 3/4"  for the sides.

I attached the DSP to the box with Liquid Glue.

I stamped the image, from Best Witches stamp set onto Basic White Cardstock with Tuxedo Black Ink.

I cut the image out with the large frame die from Scary Silhouettes dies.

I colored the image with Stampin' Dimensionals.

Light Basic Black  -   the Hat, Cape and outline of the Cauldron.

Dark Smokey Slate  -  the inside of the Cape and Cauldron.

Light and Dark Soft Suede  -  the Hair and Logs.

Dark Highland Heather  -  the Hat Band and Dress.

Dark Daffodil Delight  -  the Buckle and Fire.

Light and Dark Pumpkin Pie  -  the Fire.

Light Flirty Flamingo  -  the Cheeks.

Light Petal Pink  -  the Face and Hands.

Light Granny Apple Green  -  the Bubbles.

I stamped another Cauldron, fussy cut it and colored it.  Then I popped it up over the uncolored Cauldron with a Dimensional.

I attached the frame to the front of the box with Dimensionals.

I cut a  1 1/4"  circle from Daffodil Delight using the Stylish Shapes dies.

I attached it to the upper right side of the frame with a Dimensional and Liquid Glue.

I cut three Bats from Basic Black Cardstock using the Scary Silhouettes dies.

 I attached them to the Moon and the left side of the Frame with Glue Dots.

I attached a 5/8" Adhesive Velcro Dot to the back flap and back of the box for the closure.

I tied a small bow with Black & White Gingham Ribbon and attached it to the lower right of the frame with a Glue Dot.

I added some Wink of Stella Glitter to the Bats and for the final touch I added 3 Gorgeous Grape Glossy Dots to the upper left corner of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Best Witches stamp set

Scary Silhouettes dies

Stylish Shapes dies

Black & White Designs Designer Series Paper

Brights Designer Series Paper

Basic Black Cardstock

Daffodil Delight Cardstock

Basic White Cardstock

Black & White Gingham Ribbon

Glossy Dots Assortment

Light Basic Black Stampin' Blend

Dark Smokey Slate Stampin' Blend

Light & Dark Soft Suede Stampin' Blends

Dark Highland Heather Stampin' Blend

Dark Daffodil Delight Stampin' Blend

Light and Dark Pumpkin Pie Stampin' Blend

Light Flirty Flamingo Stampin' Blend

Light Petal Pink Stampin' Blend

Light Granny Apple Green Stampin' Blend

Tear and Tape

Liquid Glue

Dimensonals

Glue Dots

Wink of Stella

Simply Scored

Take Your Pick Tool

5/8" Low Profile Adhesive Velcro Dots

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.

See you next time!

Love and Hugs,

Cathryn

QUICK & EASY SWEET HALLOWEEN TREAT BOX with BEWITCHING stamp set - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Halloween Treat Box that measures

3 1/2  x  1 3/4  x  1".  I used Bewitching stamp set, the Witch Hat Builder Punch, Best Witches stamp set, Stylish Shapes dies and Black & White Designs Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Black & White Designs Designer Series Paper sized

6 x 6".

I scored the first 6" side at:

1/2,  2 1/4,  3 1/4  and  5".

I turned the paper a quarter turn and scored the next 6" side at:

1  and  4 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your DSP should look after scoring, cutting and rounding the corners of the flap.

I stamped the Witch Hat image, from Bewitching stamp set, onto Basic White Cardstock with Tuxedo Black Ink.

I colored the image with Stampin' Blends.

Light and Dark Pumpkin Pie

Light and Dark Highland Heather

Light and Dark Daffodil Delight

I cut the Witch Hat out using the Witch Hat Builder Punch.

I attached the Hat to the front of the box with Dimensionals.

I stamped the Frog, from Best Witches stamp set onto Basic White Cardstock using Tuxedo Black Ink.

I colored the Frog with  Light and Dark Granny Apple Green Stampin' Blends.

I fussy cut the frog out by hand.

I stamped the sentiment, from Scary Cute stamp set, onto a piece of Highland Heather Cardstock.

I cut the sentiment out with a 1 1/4" circle die from Stylish Shapes dies.

I attached the frog to the right side of the circle with Liquid Glue.

I punched 2 small holes in the flap and 2 matching ones in the body of the box.

I ran Glittered Organdy Ribbon through the holes, strung the circle onto the right side, and tied a bow.

For the final touch I added 2 Parakeet Party 2022-2024 In Color Matte Decorative Dots next to the Frog.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Bewitching stamp set

Witch Hat Builder Punch

Best Witches stamp set

Scary Cute stamp set

Stylish Shapes dies

Black & White Designs Designer Series Paper

Highland Heather Cardstock

Basic White Cardstock

Tuxedo Black Ink

Light and Dark Pumpkin Pie Stampin' Blends

Light and Dark Highland Heather Stampin' Blends

Light and Dark Daffodil Delight Stampin' Blends

Light and Dark Granny Apple Green Stampin' Blends

Glittered Organdy Ribbon

2022-2024 In Color Matte Decorative Dots

Tear and Tape

Liquid Glue

Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.

See you next time!

Love and Hugs,

Cathryn

HALLOWEEN TREAT "MINI LUNCHBOX" with SCARY CUTE stamp set - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Halloween Treat Box that I modeled after my kids lunchboxes.  It measures  4  x  3  x  1 1/2".  I used Scary Cute stamp set, Scary Silhouettes dies, Stylish Shapes dies and Black & White Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Pumpkin Pie Cardstock sized

9 1/2  x  7 3/4".

I scored the  9 1/2" side at:

1/2,  2,  5  and  6 1/2".

I scored the  7 3/4" side at:

1 1/2,  5 1/2  and  6".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring, cutting and rounding the corners of the flap.

I attached 3 pieces of Black & White Designs Designer Series Paper.

(2)  2 3/4  x  3 3/4"  for the front and back.

(1)  2 3/4  x  1 1/2  for the top flap.

I attached the DSP to the box with Liquid Glue.

For the Handle I cut a piece of Gorgeous Grape Cardstock to:

1/2  x  7".

I curled the long side with my Bone Folder then attached about 1" on each side to the back of the box.

I attached the handle with Stampin' Seal+ (If your very patient you can use Liquid glue).

I attached a 3/8" Adhesive Velcro Dot inside the flap and one on the Body of the Box for the closure.

I stamped the image, from Scary Sweet stamp set, onto a  2 1/4  x  1 1/4" piece of Basic White Cardstock with Tuxedo Black Ink.

I attached the image to a piece of Gorgeous Grape Cardstock, sized   2 1/2  x  1 1/2",  with Liquid glue.

I attached the image piece to the front of the bag below the flap with Dimensionals.

I wound Metallic Mesh Ribbon around the right side of the handle and tied a bow at the front.

I stamped the sentiment, from Scary Cute stamp set, onto Pumpkin Pie Cardstock with Tuxedo Black Ink.

I cut the sentiment out with the label die from Scary Silhouettes dies.

I punched a small hole in the left side of the label and strung it onto Linen Thread.

I tied the Linen Thread around the bow and tied another bow at the front.

For the final touch I made a small bow with Black and White Gingham Ribbon.

I attached the bow to the upper left side of the image with a Glue Dot.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Scary Cute stamp set

Scary Silhouettes dies

Stylish Shapes dies

Black & White Designs Designer Series Paper

Pumpkin Pie Cardstock

Gorgeous Grape Cardstock

Basic White Cardstock

Tuxedo Black Ink

Metallic Mesh Ribbon

Black & White Gingham Ribbon

Linen Thread

Tear and Tape

Liquid Glue

Stampin' Seal +

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.

See you next time!

Love and Hugs,

Cathryn

FULL SIZED Kit Kat HALLOWEEN TREAT BOX with BEST WITCHES stamp set - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Halloween Treat Box that will hole a Full Sized KitKat bar and Tic-Tacs.  It measures  3 3/4  x  3 1/4  x  1".  I used Best Witches stamp set, Scary Silhouettes dies, Witch Hat Builder Punch and Celebrate Everything Host Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Daffodil Delight Cardstock sized

11  x  6 1/4".

I scored the  11" side at:

1 1/2,  2 1/2,  6 1/4  and  7 1/4".

I scored the  6 1/4" side at:

1/2,  1 1/2,  4 3/4  and  5 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Celebrate Everything Host Designer Series Paper to the box.

(2)  3  x  3 1/2"  for the front and back of the top flap.

(1)  3  x  1 1/4"  for the inside bottom.

(2)  3/4  x  3 1/2"  for the long sides.

(2)  3  x  3/4"  for the short sides.

I attached the DSP to the box with Liquid Glue.

I stamped the Witch and Frog images, from Best Witches stamp set, onto Basic White Cardstock using Tuxedo Black Ink.

I cut the image out with a Frame die from Scary Silhouettes dies.

I fussy cut the Frog out by hand.

I colored the images with Stampin' Blends.

Light Flirty Flamingo for the Cheeks.

Dark Petal Pink for the Face and Hands.

Light and Dark Smokey Slate for the Hat and Dress.

Light Highland Heather for inside the Buckle.

Dark Highland Heather for the Hat Band and Cape.

Light Soft Suede for the Hair.

Dark Soft Suede for the Broom Stick.

Dark Daffodil Delight for the Buckle.

Light Daffodil Delight for the Broom.

Light and Dark Granny Apple Green for the Frog.

I attached the Witch image frame to the front of the box with Dimensionals.

I attached the Frog to the lower left side with a Dimensional and some Liquid Glue.

I stamped the sentiment, from Best Witches stamp set, onto Highland Heather Cardstock with Tuxedo Black Ink.

I cut the sentiment out with a Label die from Scary Silhouettes stamp set.

Then I attached it inside the front cover with Liquid Glue.

I tied a small bow with Black and White Gingham Ribbon and attached it to the upper right corner of the box with a Mini Dimensional.

I cut 3 stars from Daffodil Delight Cardstock using the Witch Hat Builder Punch.

I used my Silicone Mat, Liquid Glue and my Take Your Pick Tool to attach the starts around the Witch.

For the final touch I added Iridescent Rhinestone Basic Jewels to the middle of each Star.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Best Witches stamp set

Scary Silhouettes dies

Witch Hat Builder Punch

Celebrate Everything Host Designer Series Paper

Daffodil Delight Cardstock

Highland Heather Cardstock

Basic White Cardstock

Tuxedo Black Ink

Black and White Gingham Ribbon

Iridescent Rhinestone Basic Jewels

Light Flirty Flamingo Stampin' Blend

Dark Petal Pink Stampin' Blend

Light and Dark Smokey Slate Stampin' Blends

Light and Dark Highland Heather Stampin' Blends

Light and Dark Daffodil Delight Stampin' Blends

Light and Dark Soft Suede Stampin' Blends

Light and Dark Granny Apple Green Stampin' Blends

Simply Scored

Take Your Pick Tool

Silicone Mat

Tear and Tape

Liquid Glue

Dimensionals

Mini Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my KitKat Halloween box.

See you next time!

Love and Hugs,

Cathryn

CHEERFUL BASKET of APPLES TREAT BOX with FULL BASKET DIES - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Basket of Apples treat box that measures

4  x  3 1/2  x  1 1/4".  I used Cheerful Basket stamp set, the Full Basket dies, Gingham Cottage Designer Series Paper and Stylish Shapes dies.

You can watch my Video Tutorial Here!

I started with a piece of Gingham Cottage Designer Series Paper sized

11  x  8 1/4".

I scored the  11" side at:

1/2,  4 1/2,  5 3/4  and  9 3/4".

I scored the  8 1/4" side at:

1 1/4  and  4 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring, cutting and rounding the corners of the flap.

I stamped the apple image, from Cheerful Basket stamp set, onto Basic White Cardstock with Tuxedo Black Ink.

I colored the image with Stampin' Blends.

Light and Dark Mossy Meadow for the Leaves.

Light and Dark Real Red for the Apples.

I cut the image out using the Full Basket dies.

I cut several pieces of Cardstock to make the basket using the Full Basket dies.

Soft Suede for the Basket.

Crumb Cake for the Slats on the Basket.

Smokey Slate for the handle.

I cut a piece of Real Red Cardstock to fit behind the lower part of the basket.  I stamped the apples all over it and colored only the leaves with a Light Mossy Meadow Stampin' Blend.

I attached the pieces all together using Liquid Glue and the Silicone Mat.

I cut 2 Apples from Real Red and 2 stems with leaves from Mossy Meadow Cardstock using the Full Basket dies.

I attached the apples inside the box on the lower right with Liquid Glue.

Next I attached the Stems with Leaves on top of the apples.

I tied Black and White Gingham Ribbon around the top of the front flap and tied a bow on the left side.

I secured the bow to the box with a Glue Dot.

Then, I attached the Basket to the front of the box with Dimensionals.

I cut a 1 1/4" circle from So Saffron Cardstock using the Stylish Shapes dies.

I stamped the sentiment, from Cheerful Basket stamp set, onto the circle with Tuxedo Black ink.

I cut a  1 3/8" circle from Real Red Cardstock using the Layering Circle dies.

I attached the circles together with Liquid Glue.

I attached the circles to the lower right side of the basket with a Dimensional on the right and Liquid Glue on the left side.

For the final touch I added 3 Matte Black Dots, one to an apple and two around the sentiment.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Cheerful Basket stamp set

Full Basket dies

Gingham Cottage Designer Series Paper

Stylish Shapes dies

Layering Circle dies

Soft Suede Cardstock

Crumb Cake Cardstock

Real Red Cardstock

Mossy Meadow Cardstock

So Saffron Cardstock

Smokey Slate Cardstock

Basic White Cardstock

Tuxedo Black Ink

Light and Dark Real Red Stampin' Blends

Light and Dark Mossy Meadow Stampin' Blends

Black and White Gingham Ribbon

Matte Black Dots

Tear and Tape

Liquid Glue

Glue Dots

Dimensionals

Simply Scored

Take Your Pick Tool

Silicone Mat

Thank you for visiting my Blog today.  I hope you enjoyed my Apple Basket treat box.

See you next time!

Love and Hugs,

Cathryn