FINAL HALLOWEEN TREAT BOX FOR 2023 with PICK OF THE PATCH

Shop Stampin' Up! Here

Hi Friends!My project today is a Halloween Treat Box that measures  2 3/4  x  3 3/4  x  1 1/4".  I used the Pick of the Patch Bundle, Bag of Bones Bundle, Tricks & Treats dies and Them Bones Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a piece of Pumpkin Pie Cardstock sized

8 1/2  x  6"

I scored the  8 1/2" side at:

1 1/4,  4,  5 1/4  and  8".

I scored the  6" side at:

1 1/4  and  5".

After cutting the box I cut the top flap with the Zigzag die from the Trick & Treats dies.

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached 3 pieces of Them Bones Designer Series Paper to the box.

(2)  2 1/2  x  3 1/2"  front and back

(1)  2 1/2  x  1/2"  top flap

I attached the DSP to the box with Liquid Glue.

I stamped the Skeleton, from Bag of Bones Stamp set onto Basic Black Cardstock with Versamark Ink.

I sprinkled White Stampin' Emboss Powder onto the image, spilled off the excess and the heated it with my Heat Tool.

I cut the Skeleton out with the Bag of Bones dies.

I stamped the Large Pumpkin, from Pick of the Patch stamp set, onto Basic White Cardstock with Pumpkin Pie Ink.

I stamped the Face with Tuxedo Black Ink.

I stamped the Stem with Old Olive Ink.

I cut the images out using the Pick of the Patch Punch.

I attached the Skeleton to the left side of the box first with Liquid Glue.

Next, I attached the Stem to the back of the Pumpkin with Liquid Glue.

I attached the Pumpkin to the left side with Dimenisonals.

I put Glossy Scotch Tape onto a small piece of Basic Black Cardstock and cut the 3 Bats out using the Bag of Bones dies.

I attached the Bats to the upper right side of the box with Liquid Glue.

I punch 2 holes in the front flap with a 1/8" Hole Punch.

I closed the flaps and made pencil marks on the body of the box through the holes in the flap and punched them out.

I ran about 14" of Black & White Gingham Ribbon from the inside to the outside of the box then through the back of the flap to the front.

I tied a bow at the front.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Bag of Bones stamp set & dies Bundle

Pick of the Patch stamp set & Punch Bundle

Tricks & Treats dies

Them Bones Designer Series Paper

Pumpkin Pie Cardstock

Basic Black Cardstock

Basic White Cardstock

Versamark Ink

White Stampin' Emboss Powder

Heat Tool

Pumpkin Pie Ink

Tuxedo Black Ink

Simply Scored

Take Your Pick Tool

Tear & Tape

Liquid Glue

Dimensionals

Glossy Scotch Tape

1/8 or 1/4" Hole Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.

See you next time!

Love and Hugs,

Cathryn

PINK HALLOWEEN TREAT BOX with PICK OF THE PATCH

Shop Stampin' Up Here

Hi Friends!My project today is a Halloween Treat Box that measures  2 3/4  x  4 1/4  x  3/4".  I used the Pick of the Patch stamp set and Punch Bundle, Nested Essentials dies, Bright & Beautiful Designer Series Paper and Blooming Pearls.
You can watch my Video Tutorial Here!

I started with a pieces of Basic Black Cardstock sized

8  x  6 1/2"

I scored the  8" side at:

1/2,  1,  3 3/4,  4 1/4,  4 3/4  and  7 1/2".

I scored the  6 1/2" side at:

3/4  and  5".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached 3 pieces of Bright & Beautiful Designer Series Paper to the box.

(2)  2 1/2  x  4"  front and back

(1)  2 1/2  x  1 1/4  back flap

I attached the DSP to the box with Liquid Glue.

I cut a  1 7/8  x  2 1/2"  rectangle from Bright & Beautiful DSP using the Nested Essentials dies.

I stamped the trio of Leaves, from Pick of the Patch stamp set, all over the rectangle with Bubble Bath Ink.

I stamped the sentiment onto the bottom of the rectangle with Tuxedo Black Ink.

I stamped the Large Pumpkin onto Basic White Cardstock using Bubble Bath Ink.

 I stamped the Face onto the Pumpkin with Tuxedo Black Ink.

I stamped the Stem and Leaf with Old Olive Ink.

I cut all the images out using the Pick of the Patch Punch.

I stamped the Raven with Tuxedo Black Ink onto Basic White Cardstock.  I cut the Raven out by hand.

I colored the Beak with a Dark Daffodil Delight Stampin' Blend and

the Eye with a Dark Granny Apple Green one.

I attached the Pumpkin to the Rectangle with Dimensionals.

I attached the Leaf behind the Stem and Pumpkin with a Mini Dimensional and Liquid Glue.

I attached the Raven to the Pumpkin with Dimensionals.

I tied Glittered Organdy Ribbon around the long side of the box and tied a bow on the top of the front.

I attached the Rectangle over the Ribbon with Dimensionals.

For the final touch I added 2 Blooming Pearls to either side of the sentiment.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Pick of the Patch stamp set & Punch Bundle

Nested Essentials dies

Bright & Beautiful Designer Series Paper

Basic Black Cardstock

Basic White Cardstock

Bubble Bath Ink

Old Olive Ink

Tuxedo Black Ink

Stampin' Blends

Glittered Organdy Ribbon

Blooming Pearls

Simply Scored

Take Your Pick Tool

Tear & Tape

Liquid Glue

Dimensionals

Mini Dimensionals

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Box.

See you next time!

Love and Hugs,

Cathryn

6 X 6 DESIGNER SERIES PAPER HALLOWEEN TREAT BOX with TRICKS OR TREATS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Halloween Treat Box I made with a pieces of6 x 6 Designer Series Paper.  It measures  1 1/2  x  3  x  1".  I used the Tricks or Treats stamp set & dies Bundle, Bag of Bones dies, Them Bones Designer Series Paper and Black & Very Vanilla Large Check Ribbon.
You can watch my Video Tutorial Here!

I started with a piece of Them Bones Designer Series Paper sized

6 x 6"

I scored the 1st 6" side at:

1,  2 1/2,  3 1/2  and  5".

I turned the paper 1/4 turn and scored at:

1/2,  1 1/2,  4 1/2  and  5 1/2".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I stamped the sentiment, from Tricks or Treats stamp set, onto Very Vanilla Cardstock with Pumpkin Pie Ink.

I cut the sentiment out with the frame die from Tricks or Treats dies.

I put a pieces of Packing Tape over a small piece of Basic Black Cardstock and rubbed my finger over it to smooth.

This makes the bats come out nicely shiny.

I cut the 3 Bats out of the taped Cardstock using the Bag of Bones dies.

I put my 2 fun sized pieces of Candy in the box and tied Basic Black and Very Vanilla Large Check Ribbon around the short side of the box.

I tied a bow on the top of the right side.

I attached the sentiment frame to the top of the box, over the ribbon, with Dimensionals.

For the final touch I attached the Bats around the sentiment with Liquid Glue.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Tricks or Treats stamp set & dies Bundle

Bag of Bones dies

Them Bones Designer Series Paper

Very Vanilla Cardstock

Basic Black Cardstock

Packing Tape

Pumpkin Pie Ink

Basic Black & Very Vanilla Large Check Ribbon

Simply Scored

Take Your Pick Tool

Liquid Glue

Dimensionals

Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.

See you next time!

Love and Hugs,

Cathryn

MINI RICE KRISPIES TREAT BOX with BAG OF BONES - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends! My project today is a Halloween Treat Box that measures 2 1/2 x 4 1/4 x 1". It fits a Mini Rice Krispies Treat inside. I used the Bag of Bones Stamp set & dies Bundle, Them Bones Designer Series Paper and Glittered Organdy Ribbon. You can get two of these boxes from a sheet of Cardstock.
You can watch my Video Tutorial Here!

I started with a piece of Basic Black Cardstock sized

7 1/2 x 5 1/2"

I scored the 7 1/2" side at:

1, 3 1/2, 4 1/2 and 7".

I scored the 5 1/2" side at:

1, 4 1/2 and 5".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached 4 pieces of Them Bones Designer Series Paper to the box.

(2)  2 1/4  x  3 1/4"  front and back

(2)  3/4  x  3 1/4"  sides

I attached the DSP with Liquid Glue.

I stamped the Cat Skeleton, from Bag of Bones stamp set, onto Basic Black Cardstock with Versamark Ink.

I stamped the sentiment onto Starry Sky Cardstock with Versamark Ink.

I sprinkled both images with White Stampin' Emboss Powder and heated them up with my Heat Tool.

I cut the Cat out using the Bag of Bones dies.

I cut the sentiment out by hand.

I cut a circle from Daffodil Delight Cardstock using the 1 3/4" Circle Punch.

I cut 3 Bats and the Fence from Basic Black Cardstock using the Bag of Bones dies.

I attached everything to the box with Liquid Glue.

I attached the Moon first about 1/4" from the top and sides of the DSP.

Next I attached the Fence with the top covering the bottom of the Moon.

I attached the Cat to the right side of the fence and the Bats to the Moon.

Finally I attached the Sentiment to the lower left of the Fence.

I punched two sets of holes in the top flaps with a 1/8" Hole Punch.

I ran Glittered Organdy Ribbon through the holes and tied a bow at the front.

For the final touch I added 3 Starry Sky 2022-2024 In Color Pearls around the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Bag of Bones stamp set & dies Bundle

Them Bones Designer Series Paper

1 3/4" Circle Punch

Basic Black Cardstock

Daffodil Delight Cardstock

Starry Sky Cardstock

Versamark Ink

White Stampin' Emboss Powder

Heat Tool

Glittered Organdy Ribbon

2022-2024 In Color Pearls

Tear & Tape

Liquid Glue

Simply Scored

Take Your Pick Tool

1/8" Hole Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.

See you next time!

Love and Hugs,

Cathryn

LARGE CHRISTMAS TREAT BOX with FESTIVE & FUN - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a very large Treat/Gift Box that measures  3 1/4  x  6 1/4  x  2".  I used the Festive & Fun stamp set, Radiating Stitches dies, Merry, Bold & Bright Designer Series Paper and Blooming Pearls.
You can watch my Video Tutorial Here!

I started with a full sheet of Real Red Cardstock.

11  x  8 1/2"

I scored the 11" side at:

2,  5 1/4,  7 1/4  and 10 1/2".

I scored the  8 1/2" side at:

2,  6 3/4  and  7 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Merry, Bold & Bright Designer Series Paper to the box.

(2)  3  x  4 1/2"  front and back

(2)  1 3/4  x  4 1/2"  sides

(2)  3/4  x  3"  upper front and back

I attached the DSP to the box with Liquid Glue.

I stamped the Giraffe image, from Festive & Fun stamp set onto Basic White Cardstock with Tuxedo Black Ink.

I cut the image out using a  2 5/8  x  4" Rectangle using the Radiating Stitches dies.

I colored the image with Stampin' Blends.

Light and Dark Daffodil Delight  -  Giraffe and Star

Dark Pecan Pie  -  Giraffe's Spots and Hooves

Light & Dark Granny Apple Green  -  Tree, Ornaments and Holly Leaves

Dark Real Red  -  Hat, Ornaments, Holly Berries and Bow

Light & Dark Crumb Cake  -  Box and Tree Trunk

I attached the Rectangle to the front of the box with Dimensionals.

I stamped the sentiment onto Real Red Cardstock with Tuxedo Black Ink.

I cut the sentiment into 3 pieces and attached it to the upper left side with Liquid Glue.

I tied Burlap Ribbon around the inside of a Binder Clip and tied a bow at the front.

I put the Clip on the top for the Closure.

For the final touch I added 3 Gold Blooming Pearls to the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Festive & Fun stamp set

Radiating Stitches dies

Merry, Bold and Bright Designer Series Paper

Real Red Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

Real Red & Burlap Ribbon Combo Pack

Tear & Tape

Liquid Glue

Dimensionals

Clip  -  Walmart

Thank you for visiting my Blog today.  I hope you enjoyed my Christmas Box.

See you next time!

Love and Hugs,

Cathryn

CHRISTMAS TREAT & GIFT CARD BOX with WARMEST HEART - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Treat Box/Gift Card Box that measures  4 1/4  x  2 3/4  x  3/4".  I used the Warmest Heart stamp set & dies Bundle, Radiating Stitches dies, Merry Bold & Bright Designer Series Paper and Iridescent Discs.
You can watch my Video Tutorial Here!

I started with a pieces of Old Olive Cardstock sized

7 1/2  x  6 1/2"

I scored the  7 1/2" side at:

3/4,  3 1/2,  4 1/4  and  7".

I scored the  6 1/2" side at:

3/4,  5  and  5 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Merry Bold and Bright Designer Series Paper to the box.

(2)  2 1/2  x  4"  front and back

(2)  1/2  x  4"  long sides

(2)  1/2  x  2 1/2"  short sides

I attached the DSP to the box with Liquid Glue.

I stamped the outline of the Thermos, from Warmest Heart stamp set, twice with Tuxedo Black Ink.

Once onto Poppy Parade Cardstock and once onto Old Olive Cardstock.

I stamped the Poppy Parade one with the "plaid" pattern stamp onto the bottom of the Thermos with Poppy Parade Ink.

I cut the two images out using the Warmest Heart dies.

I cut the bottom of the Poppy Parade Thermos off right below the cap and attached it to the Old Olive Thermos with Liquid Glue.

I cut the "diamond" piece out of Old Olive Cardstock using the Warmest Heart dies.

I attached it to the bottom of the Thermos with Liquid Glue.

I cut a  2  x  3 3/8"  Rectangle from a piece of White Shimmer Paper using the Radiating Stitches dies.

I tied Iridescent Ribbon around the long side of the box and tied a bow at the top.

I attached the Rectangle to the front of the box, over the Ribbon, with Dimensionals.

I attached the Thermos onto the Rectangle with Dimensionals.

'

I added an Adhesive Backed Snowflake (Retired) to the middle of the Thermos bottom and for the final touch I added 3 Iridescent Discs to the Cap.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Warmest Heart stamp set & dies Bundle

Radiating Stitches dies

Merry, Bold and Bright Designer Series Paper

White Shimmer Paper

Old Olive Cardstock

Poppy Parade Cardstock

Tuxedo Black Ink

Poppy Parade Ink

Iridescent Ribbon

Iridescent Discs

Adhesive Backed Snowflake (Retired) :(

Tear & Tape

Liquid Glue

Dimensionals

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Christmas Box.

See you next time.

Love and Hugs,

Cathryn

FAUX WINDOW HALLOWEEN BOX with BAG OF BONES - Stampin' Up!

Shop Stampin' Up! Here!

Hi Friends!My project today is a Halloween Treat Box that measures  3 x 3 x 1 1/4".  I used the Bag of Bones stamp set & dies Bundle, Stylish Shapes dies, All That dies, Them Bones Designer Series Paper and Blooming Pearls.
You can watch my Video Tutorial Here!

I started with a piece of Basic Black Cardstock sized

9 3/4  x  6 1/2"

I scored the  9 3/4" side at:

1 1/4,  4 1/4,  5 1/2  and  8 1/2"

I scored the  6 1/2" side at:

1/2,  1 3/4.  4 3/4  and  6".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Them Bones Designer Series Paper to the box.

(2)  2 3/4  x  2 3/4"

Do not put these pieces on yet.

I cut a 2 1/8" stitched circle out of one of the pieces of DSP using the Stylish Shapes dies.

(4)  1  x  2 3/4"  for the sides.

I stamped the Skeleton, from Bag of Bones stamp set, onto Basic Black Cardstock with Versamark Ink.

I sprinkled White Stampin' Emboss Powder over the image, poured off the excess and heated the image with my Heat Tool.

I cut the image out using the Bag of Bones dies.

I attached the legs of the Skeleton inside the bottom of the circle on the DSP with Liquid Glue.

I cut the parts of the image off that didn't fit in the DSP.

I put Liquid Glue onto onto the back of the Skeleton and remaining DSP then attached it to the other pieces of DSP.

I attached the entire piece to the top of the box.

I stamped the sentiment, from Bag of Bones stamp set, onto Pumpkin Pie Cardstock with Tuxedo Black Ink.

I cut the sentiment out with a label from All That dies.

I attached it to the top of the box on the bottom right with Liquid Glue.

I tied a small bow with Black and White Gingham Ribbon and attached it to the right side of the sentiment with Glue Dots and Liquid Glue.

For the final touch I added 3 Blooming Pearls to the top of the box on the upper left corner.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Bag of Bones stamp set & dies Bundle

Stylish Shapes dies

All That dies

Basic Black Cardstock

Pumpkin Pie Cardstock

Them Bones Designer Series Paper

Versamark Ink

Heat Tool

White Stampin' Emboss Powder

Tuxedo Black Ink

Black & White Gingham Ribbon

Blooming Pearls

Stampin' Seal +

Liquid Glue

Dimensionals

Glue Dots

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Box.

See you next time!

Love and Hugs,

Cathryn