Friday, April 5, 2024

SQUISHY CHEESE TOY GIFT BOX with CUTEST COW - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Box that measures  3  x  4  x  1 3/4".  I used the Cutest Cow stamp set & Punch Bundle, Bee Mine Designer Series Paper, Sheer Ribbon Combo Pack and Stampin' Blends.

You can watch My Video Tutorial Here!


I started with a piece of Real Red Cardstock sized
10  x  6"
I scored the  10" side at:
1 3/4,  4 3/4,  6 1/2  and  9 1/2"
I scored the  6" side at:
1 3/4,  4 1/4  and  5 1/2"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.



I attached several pieces of Bee Mine Designer Series Paper to the box.
Upper Box - Red DSP
(2)  2 3/4  x  1"
Lower Box
(2)  2 3/4  x  2 1/4"  front and back
BEFORE putting the front piece on I stamped the sentiment to the upper left of the DSP with Real Red Ink.
(2)  1 1/2  x  2 1/4"  sides
I attached the DSP to the box with Liquid Glue.


I stamped the images from Cutest Cow stamp set onto Basic White Cardstock with Tuxedo Black Ink.
I cut the Cow pieces out using the Punch.
I fussy cut the Milk Can and Bell out by hand.
I put the Cow together with Liquid Glue.


I colored the images with Stampin' Blends.
Light & Dark Smokey Slate  -  Cow
Dark Petal Pink  -  Muzzle
Light & Dark Real Red  -  Milk Can and Bell


I cut a piece of Granny Apple Green Cardstock to
2 3/4  x  3/4"
I stamped the Grass image all over the Cardstock with Granny Apple Green Ink.
I attached the "Grass" to the bottom of the front of the box with Liquid Glue.


I attached the Milk Can to the left side of the Grass with Liquid Glue.
I attached the Cow to the middle of the Grass with Dimensionals.
I attached the Bell just below the Cow's head with Liquid Glue.
I tied a tiny bow with Yellow Twine and attached it to the top of the Cow's Bell with Liquid Glue.


I punched 2 sets of holes in the top of the box and ran Lemon Lolly Sheer Ribbon through them, tying a bow at the front.
For the final touch I added 2 Red Flowers, from the Hearts & Flowers Embellishments, in front of the Cow.



Supplies:
Cutest Cow stamp set & Punch Bundle
Bee Mine Designer Series Paper
Real Red Cardstock
Granny Apple Green Cardstock
Basic White Cardstock
Tuxedo Black Ink
Granny Apple Green Ink
Real Red Ink
Stampin' Blends
Baker's Twine 3 Pack
Sheer Ribbon Combo Pack
Hearts & Flowers Embellishments
Tear & Tape
Liquid Glue
Dimensionals
Simply Scored
Take Your Pick Tool
Hole Punch

Thank you for visiting my Blog today.  I hope you liked my Cow box.
See you next time!

Love & Hugs,
 Cathryn

Wednesday, April 3, 2024

MOTHER'S DAY GIFT BOX with the FLOWER CART BUNDLE - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Gift Box for Mother's Day that measures  3 1/2  x  2 3/4  x  1".  I used the Flower Cart stamp set & dies Bundle, Perennial Postage dies, Lighter Than Air Designer Series Paper and Balmy Blue Variegated Ribbon.

You can watch my Video Tutorial Here!


I started with a piece of Balmy Blue Cardstock sized
8 1/2  x  7"
I scored the  8 1/2" side at:
1,  3 3/4,  4 3/4  and  7 1/2"
I scored the. 7" side at:
3/4,  1 3/4,  5 1/4  and  6 1/4"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached several pieces of Lighter Than Air Designer Series Paper to the box.
(2)  3 1/4  x  2 1/2"  front and back
(2)  3 1/4  x  3/4"  long sides
(2)  2 1/2  x  3/4"  short sides
I attached the DSP to the box with Liquid Glue.


I stamped the images from the Flower Cart stamp set onto Basic White Cardstock.
Leaves  -  Granny Apple Green Ink
Flowers  -  Fresh Freesia Ink
Pots  -  Balmy Blue Ink
I cut the images out using the Flower Cart dies.


I cut a  2 3/4  x  2" rectangle from Bright & Beautiful Designer Series Paper using the Perennial Postage dies.
I stamped the sentiment onto the bottom with Tuxedo Black Ink.


I attached the rectangle to the top of the front of the box with Dimensionals.
I attached the Flowers to the Pots with Liquid Glue.
Next, I attached the entire piece to the rectangle, over the "Happy" part of the sentiment with Dimensionals.


I tied a bow with Balmy Blue Variegated Ribbon and attached it over the Flowers with Liquid Glue and a Glue Dot.
I added a Low Profile 3/8" Adhesive Velcro Dots to the flap for the closure.


For the final touch I added a Iridescent Rhinestone Basic Jewel to the left Pot.



Supplies:
Flower Cart stamp set & dies Bundle
Perennial Postage dies
Lighter Than Air Designer Series Paper
Bright & Beautiful Designer Series Paper
Balmy Blue Cardstock
Basic White Cardstock
Granny Apple Green Ink
Fresh Freesia Ink
Tuxedo Black Ink
Balmy Blue Variegated Ribbon
Stampin' Seal+
Liquid Glue
Dimensionals
Simply Scored
Take Your Pick Tool
Corner Rounder
3/8" Low Profile Adhesive Velcro Dots

Thank you for visiting my Blog today.  I hope you enjoyed my Mother's Day Box.
See you next time!

Love & Hugs,
Cathryn

Tuesday, April 2, 2024

BIRTHDAY TREAT BOX with HOORAY FOR SURPRISES - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Birthday Treat Box that measures  3  x  4 1/2  x  1".  I used the Hooray for Surprises stamp set & dies Bundle, Everyday Details dies, Stylish Shapes dies and Delightfully Eclectic Designer Series Paper.

You can watch my Video Tutorial Here!


I started with a piece of Bubble Bath Cardstock sized
8 1/2  x  7 1/4"
I score the  8 1/2" side at:
1/2,  3 1/2,  4 1/2  and  7 1/2"
I scored the  7 1/4" at:
1,  5 1/2  and  6 1/2".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached several piece of Delightfully Eclectic Designer Series Paper to the box.
(2)  2 3/4  x  4 1/4"  front and back
(2)  3/4  x  2 3/4"  short sides
(2)  3/4  x  4 1/4"  long sides
I attached the DSP to the box with Liquid Glue.


I cut a  2 1/4  x  3 3/4" rectangle from the Striped side of the Delightfully Eclectic Designer Series Paper using the Everyday Details dies.
I stamped the sentiment, from Hooray for Surprises stamp set, onto the bottom of the Rectangle with Smokey Slate Ink.


I stamped the Cake onto Basic White Cardstock with Bubble Bath Ink.
I cut it out with the Hooray for Surprises dies.
I cut a  2 1/4" circle from Basic White Cardstock using the Stylish Shapes dies.
I stamped the Flame onto the top of the circle first with Daffodil Delight Ink.
Next I stamped the Candle with Melon Mambo Ink.
I attached the Cake onto the circle, below the Candle, with Dimensionals.


I tied White and Silver Sheer Ribbon around the short side of the box and tied a bow on the left side.
I attached the circle to the top of the rectangle with Dimensionals.
I attached the entire piece onto the box, over the ribbon with Dimensionals.


I added a White Flower, from the Hearts & Flowers Embellishments, to the bottom layer of the Cake.
For the final touch I added 3 Rhinestone Basic Jewels to the circle.



Supplies:
Hooray for Surprises stamp set & dies Bundle
Everyday Details dies
Styish Shapes dies
Delightfully Eclectic Designer Series Paper
Bubble Bath Cardstock
Basic White Cardstock
Bubble Bath Ink
Melon Mambo Ink
Daffodil Delight Ink
Smokey Slate Ink
Silver & White Sheer Ribbon
Hearts & Flowers Embellishments
Rhinestone Basic Jewels
Tear & Tape
Liquid Glue
Dimensionals
Simply Scored
Take Your Pick Tool
Corner Rounder
Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Treat Box today.
See you next time!

Love & Hugs,
Cathryn

Friday, March 29, 2024

SUMMER TREAT BOX with BEACH DAY - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Summer Treat Box that measures  4  x  4  x  1".  I used the Beach Day stamp set & dies Bundle, Stylish Shapes dies, Deckled Circle dies and Lighter Than Air Designer Series Paper.

You can watch my Video tutorial Here!


I started with a piece of Lemon Lolly Cardstock sized
10 1/2  x  6"
I scored the  10 1/2" side at:
1,  5,  6  and  10".
I scored the  6" side at:
1  and  5".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look when your finished cutting.


I attached several pieces of Lighter Than Air Designer Series Paper to the box.
(2)  3 3/4  x  3 3/4"  front and back
(4)  3/4  x  3 3/4"  sides
I attached the DSP to the box with Liquid Glue.


I a  3" circle from Lighter Than Air (yellow) Designer Series Paper using the Stylish Shapes dies.
I cut a 3 1/4" circle from Basic White Cardstock using the Deckled Circle dies.
I attached Them together with Liquid Glue.
I cut a piece of Crumb Cake Cardstock with the sand die from the Beach Days dies.
I cut a piece of Tahitian Tide Cardstock with the bottom of the Waves dies.
I cut each of them, the Tahitian Tide Cardstock about 1" longer, with the same Stylish Shape die circle.
I layered the two pieces on top of the 3" circle with Liquid Glue.


I stamped the Umbrella, Beach Chair and Sand Castle onto Basic White Cardstock with Tuxedo Black Ink.
I colored the images with Stampin' Blends.
Light & Dark Bubble Bath  -  Umbrella
Light & Dark Balmy Blue  -  Beach Chair
Light Crumb Cake  -  Sand Castle
I cut the images out using the Beach Day dies.

'
I attached the Umbrella with a Dimensional on the top and Liquid Glue to the Pole.
I attached the Beach Chair with Dimensionals and the Sand Castle with Liquid Glue.


I wound White Herringbone Ribbon around the middle of the box and tied a bow at the top.
I attached the decorated circles to the front of the box, over the ribbon, with Dimensionals.


I cut the 2 pieces of the Palm Tree top from Parakeet Party Cardstock using the Beach Day dies.
I attached them together with Liquid Glue.
I attached the bottom half of the leaves to the upper right side of the circles.
For the final touch I added Lemon Lolly Dots to the middle of the Palm Leaves and lower right of the box.



Supplies:
Beach Day stamp set & dies Bundle
Stylish Shapes dies
Deckled Circle dies
Lighter Than Air Designer Series Paper
Lemon Lolly Cardstock
Tahitian Tide Cardstock
Crumb Cake Cardstock
Parakeet Party Cardstock
Basic White Cardstock
Tuxedo Black Ink
Stampin' Blends
White Herringbone Ribbon
Liquid Glue
Dimensionals
Simply Scored
Take Your pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Beach Day Treat Box.
See you next time!

Love and Hugs,
Cathryn

Wednesday, March 27, 2024

RUSSELL STOVER CHOCOLATE BAR TREAT BOX with PETS & MORE - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Treat Box for a Russell Stover Billion Dollar Chocolate Bar.  It measures  6 1/4  x  2 3/4  x  1/2".  I used the Pets & More stamp set, Nested Essentials dies and Lighter Than Air Designer Series Paper.

You can watch my Video Tutorial Here!


I started with a piece of Lemon Lolly Cardstock sized
8  x  7"
I scored the  8" side at:
3/4,  1 1/4  and  7 1/2"
I scored the  7" side at:
1/2,  3 1/4,  3 3/4  and  6 1/2"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached 2 pieces of Lighter Than Air Designer Series Paper to the box.
(2)  6  x  2 1/2"
to the front and back.


I stamped the Bunny from Pets & More stamp set onto Basic White Cardstock.
1 with Balmy Blue Ink,
1 with Fresh Freesia Ink and
1 with Pool Party Ink.
I cut the images out by hand.


I cut 2 die cuts out using the Nested Essentials dies.
One from Lighter Than Air DSP and one from Lemon Lolly Cardstock.
I attached the die cuts together with Liquid Glue and attached it to the front of the box with Dimensionals.


I attached the Bunnies to the die cut with Mini Dimensionals and Dimensionals.
I wound Bubble Bath Sheer Ribbon around the left side of the box and tied a bow next to the Bunnies.
For the final touch I added 3 Fresh Freesia Tinsel Gems around the right side.



Supplies:
Pets & More stamp set
Nested Essentials dies
Lighter Thank Air Designer Series Paper
Lemon Lolly Cardstock
Basic White Cardstock
Pool Party Ink
Bubble Bath Ink
Balmy Blue Ink
Sheer Ribbon Combo Pack
Tinsel Gems 3 Pack
Liquid Glue
Dimensionals
Mini Dimensionals
Corner Rounder
Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Bunny Treat Box.
See you nest time!

Love & Hugs,
Cathryn

Tuesday, March 26, 2024

MINI GHIRARDELLI BUNNY TREAT BOX with FLUFFIEST FRIENDS - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a Treat Box for 2 Mini Ghirardelli chocolate bunnies.  It measures  3  x  2 1/2  x  1/2".  I used the Fluffiest Friends stamp set, Everyday Details dies and Lighter Than Air Designer Series Paper.

You can watch my Video Tutorial Here!


I started with a piece of Pool Party Cardstock sized
7 1/2  x  4 1/4"
I scored the  7 1/2" side at:
1/2,  3 1/2,  4  and  7".
I scored the  4 1/4" side at:
1/2,  3  and  3 1/2".
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and cutting.


I attached several 2 pieces of Lighter Than Air Designer Series Paper to the box.
(2)  2 3/4  x  2 1/4"
I attached the DSP to the box with Liquid Glue.


I stamped the Bunny, Chick and Flowers, from Fluffiest Friends stamp set, onto Basic White Cardstock with Tuxedo Black Ink.
I cut the Bunny and Chick out with the Fluffiest Friends dies.
I fussy cut the largest Flower out by hand.


I colorer the images with Stampin' Blends.
Light and Dark Daffodil Delight  -  Chick and Flower
Light & Dark Bubble Bath  -  Bunny Ears, Feet, Nose and Cheeks
Light Smokey Slate and Color Lifter  -  Fur
I attached the Flower, over the Cupcake with Liquid Glue.


I cut a circle from Lighter Than Air Designer Series Paper using the Everyday Details dies.
I cut a 2" circle from Bubble Bath Cardstock using a 2" hole punch.
I attached them together with the Bubble Bath on the Bottom.
I attached the Bunny to the circles with Dimensionals.


I tied Lemon Lolly Sheer Ribbon around the long side of the box and tied a bow on the right side.
I attached the circles onto the front of the box, over the ribbon, with Dimensionals.


I attached the Chick to the left of the circles with 2 stacked Dimensionals.
For the final touch I added a Lemon Lolly Tinsel Gem to the middle of the Flower.



Supplies:
Fluffiest Friends stamp set
Everyday Details dies
2" Circle Punch
Lighter Than Air Designer Series Paper
Pool Party Cardstock
Bubble Bath Cardstock
Basic White Cardstock
Tuxedo Black Ink
Stampin' Blends
Sheer Ribbon Combo Pack
Tinsel Gems 4 Pack
Stampin' Seal+
Liquid Glue
Dimensionals
Corner Rounder
Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Easter Treat Box.
See you next time!

Love & Hugs,
Cathryn

Friday, March 22, 2024

LARGE TREAT BOX for CHOCOLATE COVERED CHIPS with PLAYING IN THE RAIN - Stampin' Up!


Shop Stampin' Up! Here

Hi Friends!
My project today is a large Treat box for some chocolate covered Potato Chips.  It measures  2 3/4  x  3 3/4  x  2 3/4".  I used the Playing in the Rain stamp set & dies, Excellent Eggs stamp set, Perennial Postage dies and Bright & Beautiful Designer Series Paper.
I used 12 x 12"  Cardstock for this box.

You can watch my Video Tutorial Here!


I started with a piece of Cardstock sized
11 3/4  x  9 1/4"
I scored the  11 3/4" side at:
2 3/4,  5 1/2,  8 1/4  and  11".
I scored the  9 1/4" side at:
2 3/4  x  6 1/2"
To cut and put the box together you can watch my Video Tutorial Here.
Below is a picture of how your Cardstock should look after scoring and  cutting.


I attached several pieces of Bright & Beautiful Designer Series Paper to the box.
(3)  2 1/2  x  3 1/2"  long sides
(2)  2 1/2  x  2 1/2" short sides
I attached the DSP to the box with Liquid Glue.


I stamped the Bunny, from Playing in the Rain stamp set, onto Basic White Cardstock with Tuxedo Black Ink.
I cut the image out using the Playing in the Rain dies.
I colored the image with Stampin' Blends.
Light & Dark Balmy Blue  -  Coat
Light Smokey Slate & Color Lifter  -  Bunny
Nose, Cheeks and Ears  -  Light Bubble Bath


I cut a piece of Lemon Lolly Cardstock with the Perennial Postage dies to 1 7/8  x  2 3/4".
I stamped the Egg image, from Excellent Eggs stamp set, onto the die cut with Lemon Lolly Ink for some background.
I attached the die cut to a piece of Balmy Blue Cardstock,  sized  2 1/8  x  3", with Liquid Glue.


I cut 2 pieces of grass and a bow tie out using the Playing in the Rain dies.
I attached the Bunny to the Postage die cut with Dimensionals and Mini Dimensionals.
I attached the 2 Grass pieces on either side of the Bunny on the die cut with Liquid Glue.


I wound Lemon Lolly Ribbon around the short side of the box and tied a bow on the right side.
I attached the rectangle pieces to the top of the box, over the ribbon, with Dimensionals.
I attached the Bow Tie to the top of the Bunny's Jacket with Liquid Glue.


I stamped the sentiment, from Excellent Eggs stamp set, onto Basic White Cardstock with Balmy Blue Ink.
I fussy cut the sentiment out and attached it under the Bunny with Mini Dimensionals.


For the final touches I added a small Balmy Blue Rainbow Dot to the middle of the Bow Tie and 3 Rhinestone Basic Jewels to the upper right of the Postage die cut.



Supplies:
Playing in the Rain stamp set & dies Bundle
Excellent Eggs stamp set
Perennial Postage dies
Bright & Beautiful Designer Series Paper
12 x 12 Cardstock
Lemon Lolly Cardstock
Balmy Blue Cardstock
Basic White Cardstock
Tuxedo Black Ink
Lemon Lolly Ink
Balmy Blue Ink
Stampin' Blends
Sheer Ribbon Combo Pack
Rainbow Dots
Rhinestone Basic Jewels
Liquid Glue
Dimensionals
Mini Dimensionals
Simply Scored
Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Treat Box.
See you next time!

Love and Hugs,
Cathryn