LITTLE DEBBIE BIRTHDAY CREME PIE TREAT BOX with FLOWERS of BEAUTY - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a treat box for a Little Debbie Cake.  It measures  3 1/4  x  3 1/4  x  1 1/4".  I used the Flowers of Beauty stamp set & dies Bundle, Unbounded Love stamp set & dies Bundle and Bright & Beautiful Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a piece Bubble Bath Cardstock sized

9 1/2  x  6 1/2"

I scored  the 9 1/2" side at:

1 1/4,  4 1/2,  5 3/4  and  9"

I scored the  6 1/2" side at:

1 1/4,  4 1/2  and  5 3/4"

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I added several pieces of Bright & Beautiful Designer Series Paper.

(2)  3 x 3"  front and back

(4)  1 x 3"  sides

I attached the DSP with Liquid Glue.

I cut the large piece of flowers from Basic White Cardstock using the Flowers of Beauty die set.

I cut several of the 2 sizes of flowers from Bubble Bath Cardstock using the same dies set.

I attached the White piece with Liquid Glue on some of the Branches.

I attached 2 Large Flowers and 3 small ones around the box using a Silicone Mat, Take Your Pick Tool and Liquid Glue.

I cut a 2 1/8  x  1 1/2" label from Basic White Cardstock using the Unbounded Love dies.

I stamped the sentiment onto the middle of the label with Bubble Bath Ink.

I attached the label onto the middle of the box, over the Branches, with Dimensionals.

I tied a bow with Bubble Bath Sheer Ribbon and attached it to the lower right of the label with Dimensionals and Liquid Glue.

I added Rhinestone Basic Jewels to the upper left of the box and to the middle of all the Flowers for the final touch.

You can get your Stampin' Up! supplies with Me here.

Supplies:

Flowers of Beauty stamp set & dies Bundle

Unbounded Love stamp set & dies Bundle

Bright & Beautiful Designer Series Paper

Bubble Bath Cardstock

Basic White Cardstock

Bubble Bath Ink

Sheer Ribbon Combo Pack

Rhinestone Basic Jewels

Liquid Glue

Dimensionals

Simple Scored

Take Your Pick Tool

Silicone Mat

Tear & Tape

Liquid Glue

Dimensionals

Mini Dimensional

Thank you for visiting my Blog today.  I hope you enjoyed my project today.

See you next time!

Love and Hugs,

Cathryn

COUNTRY BIRDHOUSE LONG GIFT BOX with UNBOUNDED LOVE DIES - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a long box that measures  3 3/4  x  6  x  1".  I used the  Country Birdhouse stamp set & dies Bundle, Unbounded Love dies and Country Roads Deigner Series Paper.  I put some see through Sticky Note Clouds and 2 Fancy Pens inside.
You can watch my Video Tutorial Here!

I started with a piece of Pretty Peacock Cardstock sized

10  x  8 1/2"

I scored the  10" side at:

1/2,  4 1/4,  5 1/4  and  9"

I scored the  8 1/2" side at:

1,  7  and  8"

To put the box together you can watch my Video Tutorial Here.Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Country Woods Designer Series Paper.

(2)  3 1/2  x  5 3/4"  front and back

(2)  3 1/2  x  3/4"  short sides

(2)  3/4  x  5 3/4"  long sides

I attached the DSP to the box with Liquid Glue.

I cut several pieces of the Birdhouse out using the Country Birdhouse dies.

Birdhouse and Small Top Strip and Bottom Pole  -  Pretty Peacock Cardstock

Birdhouse Top and Bottom  -  Lost Lagoon Cardstock

Scallop Piece  -  Basic White Cardstock

Leaves  -  Old Olive Cardstock

I cut the Hole "Opening" with a 7/8" circle die from the Stylish Shapes dies.

I put the pieces all together with Liquid Glue.

I stamped 2 of the Large Flower Arrangement, 2 Small Flowers and I Standing Flower, from Country Birdhouse stamp set, onto Basic White Cardstock with Tuxedo Black Ink.

I cut them out using the Country Birdhouse dies.  I cut the large Flower and Leaves from the second Arrangement out by hand.

I colored the images with Stampin' Blends.

Bird  -  Light & Dark Lemon Lolly

Beak  -  Daffodil Delight

Feet  -  Light Smokey Slate

Flowers  -  Light & Dark Bubble Bath

Leaves  -  Light Old Olive

I attached the bottom Pole to the box first 1/8" above the bottom of the DSP with Liquid Glue.

Next I attached the Birdhouse with Dimensionals.

I attached the Flowers to the Birdhouse with Liquid Glue and the Bird with Dimensionals.

I cut a label from Basic White Cardstock using the Unbounded Love dies.

I stamped the sentiment, from Country Birdhouse stamp set, onto the label with Pretty Peacock Ink.

I attached the label to the box with Liquid Glue.

I wound Lost Lagoon Bordered Ribbon around the top flap and tied a bow on the top.

I added 3 Pretty Peacock Blooming Pearls to the box for the final touch.

You can purchase your Stampin' Up! supplies with Me here.

Supplies:

Country Birdhouse stamp set & dies Bundle

Unbounded Love dies

Stylish Shapes dies

Country Woods Designer Series Paper

Pretty Peacock Cardstock

Lost Lagoon Cardstock

Basic Grey Cardstock

Basic White Cardstock

Tuxedo Black Ink

Pretty Peacock Ink

Stampin' Blends

Lost Lagoon Bordered Ribbon

Blooming Pearls

Simply Scored

Take Your Pick Tool

Silicone Mat

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my project today.

See you next time!

Love and Hugs,

Cathryn

ANNUAL CATALOG GIFT BOX with COUNTRY FLOWERS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a gift Box that measures  2 3/4  x  5  x  1".  I used the Country Flowers stamp set & dies Bundle, available May 1st, Country Woods Designer Series Paper, Stampin' Blends and the Sheer Ribbon Combo Pack.
You can watch my Video Tutorial Here!

I started with a piece of Boho Blue Cardstock sized

8  x  7 3/4"

I scored the  8" side at:

1/2,  3 1/4,  4 1/4  and  7"

I scored the  7 3/4" side at:

1,  6  and  7"

To cut an put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Carcdstock should look after scoring and cutting.

I attached several pieces of Country Woods Designer Series Paper to the box.

(2)  2 1/2  x  4 3/4"  front and back

(2)  2 1/2  x  3/4"  short sides

(2)  3/4  x  4 3/4"  long sides

I attached the DSP to the box with Liquid Glue.

I stamped the Bucket, Stool and Flowers onto Basic White Cardstock with Tuxedo Black Ink.

I cut the images out using the Country Flowers dies.

I colored the images with Stampin' Blends.

Stool

Light & Dark Boho Blue

Bucket

Light & Dark Smokey Slate

Flowers

Light & Dark Boho Blue

Light & Dark Lemon Lolly

Light & Dark Old Olive

I attached the Flowers to the Bucket first and then the Bucket to the Stool next with Liquid Glue.

I attached the entire piece to the front of the box with Dimensionals.

I tied Lemon Lolly Sheer Ribbon around the top flap and tied a bow on the top.

For the final touch I added 3 Lemon Lolly Solid Gems around the front of the box.

You can shop for your Stampin' Up! supplies with me here.

Supplies:

Country Flowers stamp set & dies Bundle - Available May 1st

Country Woods Designer Series Paper  -  Available May 1st

Boho Blue Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

Sheer Ribbon Combo Pack

Solid Gems

Tear & Tape

Liquid Glue

Dimensionals

Corner Rounder

Thank you for visiting my Blog today.  I hope you enjoyed my Gift box.

See you next time!

Love and Hugs,

Cathryn

INTERATIVE TREAT BOX with ATTENTION SHOPPERS BUNDLE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is an interactive Treat Box that measures  3 1/2  x  3 1/2  x  1".  I used a new Bundle, Available May 1st, called Attention Shoppers.  I also used the Stylish Shapes dies and Bright & Beautiful Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a piece of Lemon Lolly Cardstock sized

9 1/2  x  8 1/2"

I scored the  9 1/2" side at:

1/2,  4,  5  and  8 1/2"

I scored the  8 1/2" side at:

1,  4 1/2  and  5 1/2"

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Bright & Beautiful Designer Series Paper to the box.

(2)  3 1/4  x  3 1/4"  front and back

(2)  3 1/4  x  2 3/4"  front and back of back flap

(4)  3 1/4  x  3 1/4"  sides

I attached the DSP to the box with Liquid Glue.

I cut the two pieces of the Shopping Cart from Smokey Slate Cardstock using the Attention Shoppers dies.

I Glued the top to the bottom with Liquid Glue.

I cut a 3" circle from Bright & Beautiful DSP using the Stylish Shapes dies.

I attached the shopper cart to the circle with Liquid Glue ATTACHING ONLY THE BOTTOM AND SIDES LEAVING THE BODY AND TOP OF THE CART LOOSE.

I stamped the Bottle, Flowers and Gift Bag, from Attention Shoppers stamp set, onto Basic White Cardstock with Tuxedo Black Ink.

I colored the images with Stampin' Blends.

Bottle:

Light Boho Blue, Light Old Olive, Dark Night of Navy and Dark Crumb Cake

Gift Bag:

Light Bubble Bath and Light Smokey Slate

Flowers:

Light Boho Blue, Dark Bubble Bath, Dark Granny Apple Green

I cut the images out using the Attention Shoppers dies.

I tied Lemon Lolly Sheer Ribbon around the side of the box and tied a bow on the left side.

I attached the 3" circle to the front of the box, over the ribbon, with Dimensionals.

I cut a 1 1/2" square from Basic White Cardstock using the Stylish Shapes dies.

I stamped the sentiment, "just for you", onto the square with Boho Blue Ink.

I attached the square inside the cart, almost to the top of the box, with Liquid Glue.

I slipped the 3 items inside the Cart where is was not glued on.

The recipient can take the items in and out and move them around.

For the final touch I added 3 Blue Rainbow Dots around the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Attention Shoppers stamp set & dies Bundle  -  Available May 1st

Stylish Shapes dies

Bright & Beautiful Designer Series Paper

Lemon Lolly Cardstock

Basic White Cardstock

Smokey Slate Cardstock

Tuxedo Black Ink

Boho Blue Ink

Stampin' Blends

Sheer Ribbon Combo Pack

Rainbow Dots

Tear & Tape

Liquid Glue

Dimensionals

Corner Rounder

Thank you for visiting my Blog today.   I hope you enjoyed my box.

See you next time!

Love & Hugs,

Cathryn

HEARTS & HUGS TREAT BOX with UNBOUNDED LOVE DIES - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends! 

 My project today is a Treat Box that measures  2 1/4  x  3 1/2  x  1".  I used the Hearts & Hugs stamp set and dies Bundle, Unbounded Love dies and Unbounded Beauty Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Thick Basic White Cardstock sized

7  x  5 1/2"

I scored the  7" side at:

2 1/4,  3 1/4,  5 1/2  and  6 1/2"

I scored the  5 1/2" side at:

1  and  4 1/2"

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Unbounded Beauty Designer Series Paper to the box.

(2)  2  x  3 1/4"  front and back

(2)  3/4  x  3 1/4"  long sides

(2)  2  x  3/4" short sides

I attached the DSP to the box with Liquid Glue.

I stamped the Mouse, from Hearts & Hugs stamp set, onto Basic White Cardstock using Tuxedo Black Ink.

I cut the image out using the matching dies.

I colored the image with Stampin' Blends.

Light & Dark Bubble Bath  -  Heart, Nose and inside Ear.

Light Smokey Slate and a Color Lifter  -  Mouse Body, Tail and Feet

I cut 2 frames using the Unbounded Love dies.

I cut the large one from Thick Basic White Cardstock and the inside frame from Pretty In Pink Cardstock.

I attached the Pink Frames on top of the White die cut with Liquid Glue.

I attached the Mouse to the middle with Dimensionals.

I stamped the sentiment onto Basic White Cardstock using Tuxedo Black Ink.

I cut the sentiment out with a label from the Unbounding Love dies.

I wound Pretty In Pink Bordered Ribbon around the long side of the box and tied a bow on the top to close it.

I attached the sentiment onto the bottom/front, over the Ribbon, with Liquid Glue on either side of the label back.

I attached the Mouse and Ovals above the sentiment, overlapping a little, with Dimensionals.

For the final touch I added 3 Pretty In Pink In Color Shimmer Gems around the front of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Hearts & Hugs stamp set & dies Bundle  -  Available May 1st

Unbounded Love dies  -  Available May 1st

Unbounded Beauty Designer Series Paper  -  Available May 1

Thick Basic White Cardstock

Pretty In Pink Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

2024-2025 In Color Shimmer Gems

Tear & Tape

Liquid Glue

Dimensionals

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Treat Box.

See you next time!

Love and Hugs,

Cathryn

COFFEE CARD & TREAT BOX with LATTE LOVE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Treat Box for a Coffee Gift Card and Candy that measures 3 3/4  x  4  x  3/4".  I used the Latte Love stamp set & dies bundle, the Decorative Circle Punch, Stylish Shapes dies, Mini Pocket Envelope dies and A Little Latte Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a piece of Pretty Peacock Cardstock sized

9 1/2  x  6 1/4"

I scored the  9 1/2" side at:

1/2,  4 1/4,  5  and  8 3/4"

I scored the  6 1/4" side at:

3/4,  4 3/4  and  5 1/2"

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of what your Cardstock should look like after scoring and cutting.

I attached several pieces of A Little Latte Designer Series Paper to the box.

(2)  3 1/2  x  3 3/4"  front and back

(2)  1/2  x  3 1/2"  shorter sides

(2)  1/2  x  3 3/4"  longer sides

I attached the DSP to the box with Liquid Glue.

I stamped the Cup, from Latte Love stamp set, onto Lost Lagoon Cardstock with Pretty Peacock Ink.

I stamped the Coffee with Pecan Pie Ink.

I cut the images out using the Latte Love dies.

I colored the white edge of the Coffee die cut with a Dark Pecan Pie Blend.

I put the Coffee onto the Cup with Liquid Glue.

I attached the pieces of the French Press together using Liquid Glue and my Silicone mat.

I attached the French Press to the upper left of the box front with Liquid Glue.

I cut a circle out of Pretty Peacock Cardstock using the Decorative Circle Punch.

I cut a  2 1/8" circle from A Little Latte DSP using the Stylish Shapes dies.

I attached the two circles together with Liquid Glue.

I attached the Cup to the circles with Dimensionals,

I attached the entire piece to the front of the box with more Dimensionals.

I cut an oval label from Basic White Cardstock using the Mini Pocket Envelope dies.

I stamped the sentiment, from Latte Love stamp set, with Pretty Peacock Ink.

I attached the label above the Cup with Liquid Glue.

I added 3 Pecan Pie Swirl Dots around the box for the final touch.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Latte Love stamp set

Decorative Circle Punch

Stylish Shapes dies

M in I Picket Envelope dies

A Little Latte Designer Series Paper

Pretty Peacock Cardstock

Smokey Slate Cardstock

Pool Party Cardstock

Lost Lagoon Cardstock

Early Espresso Cardstock

Pretty Peacock Ink

Pecan Pie Ink

Dark Pecan Pie Stampin' Blend

Swirl Dots

Tear & Tape

Liquid Glue

Dimensionals

Simply Scored

Take Your Pick Tool

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my latte box.

See you next time!

Love & Hugs,

Cathryn