MINI RICE KRISPIES TREAT BOX with BAG OF BONES - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends! My project today is a Halloween Treat Box that measures 2 1/2 x 4 1/4 x 1". It fits a Mini Rice Krispies Treat inside. I used the Bag of Bones Stamp set & dies Bundle, Them Bones Designer Series Paper and Glittered Organdy Ribbon. You can get two of these boxes from a sheet of Cardstock.
You can watch my Video Tutorial Here!

I started with a piece of Basic Black Cardstock sized

7 1/2 x 5 1/2"

I scored the 7 1/2" side at:

1, 3 1/2, 4 1/2 and 7".

I scored the 5 1/2" side at:

1, 4 1/2 and 5".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached 4 pieces of Them Bones Designer Series Paper to the box.

(2)  2 1/4  x  3 1/4"  front and back

(2)  3/4  x  3 1/4"  sides

I attached the DSP with Liquid Glue.

I stamped the Cat Skeleton, from Bag of Bones stamp set, onto Basic Black Cardstock with Versamark Ink.

I stamped the sentiment onto Starry Sky Cardstock with Versamark Ink.

I sprinkled both images with White Stampin' Emboss Powder and heated them up with my Heat Tool.

I cut the Cat out using the Bag of Bones dies.

I cut the sentiment out by hand.

I cut a circle from Daffodil Delight Cardstock using the 1 3/4" Circle Punch.

I cut 3 Bats and the Fence from Basic Black Cardstock using the Bag of Bones dies.

I attached everything to the box with Liquid Glue.

I attached the Moon first about 1/4" from the top and sides of the DSP.

Next I attached the Fence with the top covering the bottom of the Moon.

I attached the Cat to the right side of the fence and the Bats to the Moon.

Finally I attached the Sentiment to the lower left of the Fence.

I punched two sets of holes in the top flaps with a 1/8" Hole Punch.

I ran Glittered Organdy Ribbon through the holes and tied a bow at the front.

For the final touch I added 3 Starry Sky 2022-2024 In Color Pearls around the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Bag of Bones stamp set & dies Bundle

Them Bones Designer Series Paper

1 3/4" Circle Punch

Basic Black Cardstock

Daffodil Delight Cardstock

Starry Sky Cardstock

Versamark Ink

White Stampin' Emboss Powder

Heat Tool

Glittered Organdy Ribbon

2022-2024 In Color Pearls

Tear & Tape

Liquid Glue

Simply Scored

Take Your Pick Tool

1/8" Hole Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.

See you next time!

Love and Hugs,

Cathryn

LARGE CHRISTMAS TREAT BOX with FESTIVE & FUN - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a very large Treat/Gift Box that measures  3 1/4  x  6 1/4  x  2".  I used the Festive & Fun stamp set, Radiating Stitches dies, Merry, Bold & Bright Designer Series Paper and Blooming Pearls.
You can watch my Video Tutorial Here!

I started with a full sheet of Real Red Cardstock.

11  x  8 1/2"

I scored the 11" side at:

2,  5 1/4,  7 1/4  and 10 1/2".

I scored the  8 1/2" side at:

2,  6 3/4  and  7 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Merry, Bold & Bright Designer Series Paper to the box.

(2)  3  x  4 1/2"  front and back

(2)  1 3/4  x  4 1/2"  sides

(2)  3/4  x  3"  upper front and back

I attached the DSP to the box with Liquid Glue.

I stamped the Giraffe image, from Festive & Fun stamp set onto Basic White Cardstock with Tuxedo Black Ink.

I cut the image out using a  2 5/8  x  4" Rectangle using the Radiating Stitches dies.

I colored the image with Stampin' Blends.

Light and Dark Daffodil Delight  -  Giraffe and Star

Dark Pecan Pie  -  Giraffe's Spots and Hooves

Light & Dark Granny Apple Green  -  Tree, Ornaments and Holly Leaves

Dark Real Red  -  Hat, Ornaments, Holly Berries and Bow

Light & Dark Crumb Cake  -  Box and Tree Trunk

I attached the Rectangle to the front of the box with Dimensionals.

I stamped the sentiment onto Real Red Cardstock with Tuxedo Black Ink.

I cut the sentiment into 3 pieces and attached it to the upper left side with Liquid Glue.

I tied Burlap Ribbon around the inside of a Binder Clip and tied a bow at the front.

I put the Clip on the top for the Closure.

For the final touch I added 3 Gold Blooming Pearls to the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Festive & Fun stamp set

Radiating Stitches dies

Merry, Bold and Bright Designer Series Paper

Real Red Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

Real Red & Burlap Ribbon Combo Pack

Tear & Tape

Liquid Glue

Dimensionals

Clip  -  Walmart

Thank you for visiting my Blog today.  I hope you enjoyed my Christmas Box.

See you next time!

Love and Hugs,

Cathryn

CHRISTMAS TREAT & GIFT CARD BOX with WARMEST HEART - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Treat Box/Gift Card Box that measures  4 1/4  x  2 3/4  x  3/4".  I used the Warmest Heart stamp set & dies Bundle, Radiating Stitches dies, Merry Bold & Bright Designer Series Paper and Iridescent Discs.
You can watch my Video Tutorial Here!

I started with a pieces of Old Olive Cardstock sized

7 1/2  x  6 1/2"

I scored the  7 1/2" side at:

3/4,  3 1/2,  4 1/4  and  7".

I scored the  6 1/2" side at:

3/4,  5  and  5 3/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Merry Bold and Bright Designer Series Paper to the box.

(2)  2 1/2  x  4"  front and back

(2)  1/2  x  4"  long sides

(2)  1/2  x  2 1/2"  short sides

I attached the DSP to the box with Liquid Glue.

I stamped the outline of the Thermos, from Warmest Heart stamp set, twice with Tuxedo Black Ink.

Once onto Poppy Parade Cardstock and once onto Old Olive Cardstock.

I stamped the Poppy Parade one with the "plaid" pattern stamp onto the bottom of the Thermos with Poppy Parade Ink.

I cut the two images out using the Warmest Heart dies.

I cut the bottom of the Poppy Parade Thermos off right below the cap and attached it to the Old Olive Thermos with Liquid Glue.

I cut the "diamond" piece out of Old Olive Cardstock using the Warmest Heart dies.

I attached it to the bottom of the Thermos with Liquid Glue.

I cut a  2  x  3 3/8"  Rectangle from a piece of White Shimmer Paper using the Radiating Stitches dies.

I tied Iridescent Ribbon around the long side of the box and tied a bow at the top.

I attached the Rectangle to the front of the box, over the Ribbon, with Dimensionals.

I attached the Thermos onto the Rectangle with Dimensionals.

'

I added an Adhesive Backed Snowflake (Retired) to the middle of the Thermos bottom and for the final touch I added 3 Iridescent Discs to the Cap.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Warmest Heart stamp set & dies Bundle

Radiating Stitches dies

Merry, Bold and Bright Designer Series Paper

White Shimmer Paper

Old Olive Cardstock

Poppy Parade Cardstock

Tuxedo Black Ink

Poppy Parade Ink

Iridescent Ribbon

Iridescent Discs

Adhesive Backed Snowflake (Retired) :(

Tear & Tape

Liquid Glue

Dimensionals

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Christmas Box.

See you next time.

Love and Hugs,

Cathryn

FAUX WINDOW HALLOWEEN BOX with BAG OF BONES - Stampin' Up!

Shop Stampin' Up! Here!

Hi Friends!My project today is a Halloween Treat Box that measures  3 x 3 x 1 1/4".  I used the Bag of Bones stamp set & dies Bundle, Stylish Shapes dies, All That dies, Them Bones Designer Series Paper and Blooming Pearls.
You can watch my Video Tutorial Here!

I started with a piece of Basic Black Cardstock sized

9 3/4  x  6 1/2"

I scored the  9 3/4" side at:

1 1/4,  4 1/4,  5 1/2  and  8 1/2"

I scored the  6 1/2" side at:

1/2,  1 3/4.  4 3/4  and  6".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Them Bones Designer Series Paper to the box.

(2)  2 3/4  x  2 3/4"

Do not put these pieces on yet.

I cut a 2 1/8" stitched circle out of one of the pieces of DSP using the Stylish Shapes dies.

(4)  1  x  2 3/4"  for the sides.

I stamped the Skeleton, from Bag of Bones stamp set, onto Basic Black Cardstock with Versamark Ink.

I sprinkled White Stampin' Emboss Powder over the image, poured off the excess and heated the image with my Heat Tool.

I cut the image out using the Bag of Bones dies.

I attached the legs of the Skeleton inside the bottom of the circle on the DSP with Liquid Glue.

I cut the parts of the image off that didn't fit in the DSP.

I put Liquid Glue onto onto the back of the Skeleton and remaining DSP then attached it to the other pieces of DSP.

I attached the entire piece to the top of the box.

I stamped the sentiment, from Bag of Bones stamp set, onto Pumpkin Pie Cardstock with Tuxedo Black Ink.

I cut the sentiment out with a label from All That dies.

I attached it to the top of the box on the bottom right with Liquid Glue.

I tied a small bow with Black and White Gingham Ribbon and attached it to the right side of the sentiment with Glue Dots and Liquid Glue.

For the final touch I added 3 Blooming Pearls to the top of the box on the upper left corner.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Bag of Bones stamp set & dies Bundle

Stylish Shapes dies

All That dies

Basic Black Cardstock

Pumpkin Pie Cardstock

Them Bones Designer Series Paper

Versamark Ink

Heat Tool

White Stampin' Emboss Powder

Tuxedo Black Ink

Black & White Gingham Ribbon

Blooming Pearls

Stampin' Seal +

Liquid Glue

Dimensionals

Glue Dots

Corner Rounder

Small Circle Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Box.

See you next time!

Love and Hugs,

Cathryn

QUICK & EASY HALLOWEEN TREAT HOLDER with PICK OF THE PATCH - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Halloween Treat Holder that measures  3 3/4  x  3  x  1/2".  I used the Pick of the Patch stamp set and dies Bundle, Nested Essentials dies and Them Bones Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a pieces of Basic Black Cardstock sized

8 3/4  x  3"

I scored the 8 3/4" side ONLY at:

3/4,  4 1/2  and  5"

To put the box together you can watch my Video Tutorial Here.

I attached 3 pieces of Them Bones Designer Series Paper to the box.

(3)  2 3/4  x  3 1/2"

Front, Back and inside Flap

I attached the DSP to the box with Liquid Glue.

I stamped the 3 Pumpkins, from Pick of the Patch stamp set, onto Basic White Cardstock with Pumpkin Pie Ink.

I stamped the accents with Calypso Coral Ink.

I cut the Pumpkins out by hand.

I stamped the Stem with Old Olive Ink and cut it out with the Pick of the Patch Punch.

I stamped the sentiment onto Basic White Cardstock.

Next I stamped the largest Pumpkin over the sentiment with Pumpkin Pie Ink.

I stamped the Stem with Old Olive Ink.

I cut the Pumpkin and Stem out using the Pick of the Patch Punch.

I attached the Stem to the Pumpkin and then inside the Flap with Liquid Glue.

I put my Candy inside the small flap at the bottom of the Treat Holder and attached it with a Staple.

I attached a  3/8" Low Profile Adhesive Velcro Dot to the inside at the bottoms for the closure.

I cut the large banner from Them Bones Designer Series Paper using the Nested Essential dies.

I attached the Stem to the smallest Pumpkin and then stacked the Pumpkins together with Liquid Glue.

I attached the stack of Pumpkins to the Banner with Dimensionals.

I attached the entire piece to the front of the Treat Holder with Dimensionals.

I tied a bow with Black & White Gingham Ribbon and attached it above the Banner with 2 Glue Dots and Liquid Glue.

For the final touch I added 3 Old Olive Glitter Sequins.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Pick of the Patch stamp set & dies Bundle

Nested Essentials dies

Them Bones Designer Series Paper

Basic Black Cardstock

Basic White Cardstock

Pumpkin Pie Ink

Old Olive Ink

Tuxedo Black Ink

Calypso Coral Ink

Black & White Gingham Ribbon

Glitter Sequins

Simply Scored

Take Your Pick Tool

Liquid Glue

Dimensionals

Glue Dots

3/8" Low Profile Adhesive Velcro Dots

Stapler

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Holder.

See you next time!

Love and Hugs,

Cathryn

SQUARE HALLOWEEN TREAT BOX with TRICKS & TREATS - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Square Halloween Treat Box that measures  3 x 3 x 1".  I used the Tricks & Treats stamp set & dies Bundle, Stylish Shapes dies, Them Bones Designer Series Paper and Blooming Pearls.
You can watch my Video Tutorial Here!

I started with a pieces of Basic Black Cardstock sized

8 1/2  x  7"

I scored the  8 1/2" side at:

2,  3,  6  and  7".

I scored the  7" side at:

1,  2,  5  and  6".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached several pieces of Them Bones Designer Series Paper to the box.

(2)  1 3/4  x  2 3/4"  larger flap

(2)  1 1/4  x  2 3/4"  smaller flap

(4)  3/4  x  2 3/4"  all sides

I attached the DSP to the box with Liquid Glue.

I cut a 2 3/8  x  2 3/8" square from Basic Black Cardstock using the Stylish Shapes dies.

I cut another piece of Them Bones Designer Series Paper to

2 1/8  x  2 1/8".

I attached the DSP onto the Basic Black Square with Liquid Glue.

I attached part of the square to the larger flap with Liquid Glue.

I attached a set of 3/8" Low Profile Adhesive Backed Velcro Dots to the flaps for the closure.

I stamped the Frankenstein onto Basic White Cardstock.

I stamped the Hair and Features first with Tuxedo Black Ink.

Then I stamped the entire Head with Granny Apple Green Ink.

I cut the Frankenstein, and a small Label from Pumpkin Pie Cardstock, using the Tricks & Treats dies.

I stamped the sentiment onto the label, the hole on the right, with Tuxedo Black Ink.

I attached Frankenstein to the middle of the squares with Dimensionals.

I attached the Label to the upper left, under the edge of Frankenstein's Head, with Liquid Glue.

I tied a double strand of Linen Thread in a bow and attached it over the hole in the tag with Liquid Glue.

For the final touch I added 3 Garden Green Blooming Pearls to the front of the box.

You can purchase your Stampin' Up! supplies with Me here.

Supplies:

Tricks & Treats stamp set & dies Bundle

Them Bones Designer Series Paper

Basic Black Cardstock

Pumpkin Pie Cardstock

Basic White Cardstock

Tuxedo Black Ink

Granny Apple Green Ink

Linen Thread

Blooming Pearls

Simply Scored

Take Your Pick Tool

Stampin' Seal +

Liquid Glue

Dimensionals

Stampin' Pierce Mat

3/8" Low Profile Adhesive Velcro Dots

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Box.

See you next time!

Love and Hugs,

Cathryn

FUN SIZE HALLOWEEN TREAT BOX with PICK of the PATCH - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!My project today is a Treat Box that I made to fit Fun Size Candy Bars.  It measures  4  x  2 1/2  x  3/4".  I used the Pick of the Patch stamp set & Punch Bundle, Stylish Shapes dies, Deckled Circle dies and Them Bones Designer Series Paper.
You can watch my Video Tutorial Here!

I started with a piece of Them Bones Designer Series paper sized

7  x  4 3/4"

I scored the  7" side at:

3/4,  3 1/4,  4  and  6 1/2".

I scored the  4 3/4" side at:

3/4".

To cut and put the box together you can watch my Video Tutorial Here.

I cut a 2 1/2" circle from Them Bones Designer Series Paper using the Stylish Shapes dies.

I scored the circle at:

1 1/4"

I folded the circle along the scoreline and attached 1/2 of it to the back of the box, with Liquid Glue to make a top flap.

I punched two holes, at the top of the box, through the entire box with a 1/8" Hole punch.

I ran Black & White Gingham Ribbon through the holes and tied a bow at the front.

I stamped the large Pumpkin, from Pick of the Patch stamp set, onto Basic White Cardstock with Pumpkin Pie Ink.

I stamped the Face of the Pumpkin with Tuxedo Black Ink.

I stamped the Stem with Old Olive Ink.

I stamped 5 Leaves onto Basic White Cardstock.

2  Crushed Curry Ink

2  Granny Apple Green Ink

1  Pumpkin Pie Ink

I cut them all out using the Pick of the Patch Punch.

I cut out 2 circles.

One 1 5/8" Granny Apple Green using the Stylish Shapes dies.

One  1 3/4"  Starry Sky from the Deckled Circle dies.

I attached them together with Liquid Glue.

I attached the Pumpkin onto the circles with Dimensionals.

I cut 2 strips of scrap Them Bones Designer Series Paper to 5/8" in width.

I flagged the ends of both using the Banners Pick a Punch.

I cut them down to 1 1/2" and attached them, one higher then the other, to the back of the circles with Liquid Glue.

I attached the entire piece to the front of the box with Dimensionals.

I attached 3 Leaves to the bottom left of the circle, next to the Flags, and the other 2 to the upper right side with Liquid Glue.

For the final touch I added 3 Starry Sky 2022-2024 In Color Pearls around the front of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Pick of the Patch stamp set & Punch Bundle

Stylish Shapes dies

Deckled Circle dies

Them Bones Designer Series Paper

Starry Sky Cardstock

Granny Apple Green Cardstock

Basic White Cardstock

Pumpkin Pie Ink

Tuxedo Black Ink

Old Olive Ink

Crushed Curry Ink

Granny Apple Green Ink

Black & White Gingham Ribbon

2022-2024 In Color Pearls

Tear & Tape

Liquid Glue

Dimensionals

Simply Scored

Take Your Pick Tool

1/8" Hole Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.

See you next time!

Love and Hugs,

Cathryn