FOLD OVER HALLOWEEN TREAT HOLDER with SCARY CUTE - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Fold Over Halloween Treat Holder that measures  2 1/2  x  3 1/4  x  1/2".  You can get 3 of these boxes from one sheet of Cardstock.  It will hold a fun sized bar of candy.  I used Scary Cute stamp set, Stylish Stitched dies, Layering Circles dies, Fabulous Frames dies and Black & White Designs Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Gorgeous Grape Cardstock sized

9  x  2 1/2".

I scored the  9" side only at:

2 1/2,  3,  6 1/4  and  6 3/4".

To put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting the hole for the treat.

I attached a piece of Black & White Designs DSP to the 2 1/2" side of the Cardstock sized:

 2 1/4  x  2 1/4" with Stampin' Seal.

I cut a hole for the treat to slip in 1/2" down from the top of the Cardstock with a label die from the Fabulous Frames dies.

I attached the top of the strip ONLY (with the DSP attached) to the inside of the box with Liquid Glue.

I attached 3 more pieces of the Black & White Designs DSP to the box.

(2)  2 1/4  x  2"  the inside and outside flaps.

(1)  2 1/4  x  3  the back.

I attached the DSP to the box with Liquid Glue.

I stamped the Princess image, from Scary Cute stamp set, onto Basic White Cardstock with Gorgeous Grape Ink.

I cut the image out with a 1 5/8" circle die from the Stylish Shapes dies.

I stamped the sentiment onto Pumpkin Pie Cardstock with Tuxedo Black Ink.

I cut the sentiment out using the same label die I used to cut the hole for the treat to slip into.

I cut 3 circles from Cardstock using the Layering Circles dies.

(2)  2"  Scalloped Circles.  One Pumpkin Pie Cardstock and one Gorgeous Grape Cardstock.

(1)  1 7/8"  Circle from Granny Apple Green Cardstock.

I attached the top 3/4 of the Gorgeous Grape Circle to the top flap with Liquid Glue.

I attached the Pumpkin Pie, Granny Apple Green and Basic White Circles together with Liquid Glue.

I attached them all on top of the Gorgeous Grape circle with Dimensionals.

I attached a 3/8" Adhesive Velcro Dot to the bottom of the circles and body of the box for the closure.

I tied a bow with Glittered Organdy Ribbon and attached it to the front of the box with 2 Glue Dots and a dab of Liquid Glue on the back of the knot.

For the final touch I added 3 Fresh Freesia 2021-2023 In Color Opal Rounds to the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Scary Cute stamp set

Stylish Shapes dies

Layering Circle dies

Fabulous Frames dies

Black & White Designs Designer Series Paper

Gorgeous Grape Cardstock

Pumpkin Pie Cardstock

Granny Apple Green Cardstock

Basic White Cardstock

Tuxedo Black Ink

Glittered Organdy Ribbon

2021-2023 In Color Opal Rounds

Stampin' Seal

Liquid Glue

Dimensionals

Glue Dots

Simply Scored

Take Your Pick Tool

3/8" Adhesive Velcro Dots

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Holder.

See you next time!

Love and Hugs,

Cathryn

HALLOWEEN CANDY BOOK BOX with BEST WITCHES - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Halloween Book Box that measures  3 1/4  x  2 3/8  x  7/8".  I will hole 2 fun size candy bars.  I used Best Witches stamp set, Stylish Shapes dies, Layering Circle dies and Black & White Designs Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Gorgeous Grape Cardstock sized

5 5/8  x  3 1/4".

I scored the  5 5/8" side only at:

2 3/8  and  3 1/4".

There is no cutting for this piece.

Next,

I cut a piece of Basic Black Cardstock sized

4 1/2  x  3 3/4".

I scored the  4 1/2" side at:

3/4  and  3 3/4".

I scored the  3 3/4" side at:

3/4  and  3".

To cut and put the box together you can watch my Video Tutorial Here.

Below are pictures of how your Cardstock pieces should look after scoring and cutting.

I attached 3 pieces of Black & White Designs Designer Series Paper to the box.

(2)  2 1/8  x  3"  for the top and bottom

(1)  5/8  x  3"  for the binding.

I attached the DSP to the box with Liquid Glue.

I cut a piece of Gorgeous Grape Cardstock sized

4  x  1".

I folded the strip around the opened side of the box with about 1 1/4" of it on the back.

I attached only the 1 1/4" end of the strip to the back of the box with Liquid Glue.

I attached a 5/8" Adhesive Velcro Dos to the front for a closure.

I stamped the image, from Best Witches stamp set, onto Basic White Cardstock with Tuxedo Black Ink.

I cut top of the image out with a 1 7/8" circle die from the Layering Circle dies.

I stamped the Frog image onto the bottom left side of a  2 1/8  x  3" piece of Basic White Cardstock with Tuxedo Black Ink.

I colored both images with Stampin' Blends.

Light Basic Black    Hat and Cape

Dark Flirty Flamingo    Cheeks

Dark Petal Pink    Face

Dark Highland Heather    Hat Band, Under Hat, Dress

Dark Daffodil Delight    Buckle

Dark So Saffron    Hair

Light & Dark Granny Apple Green    Frog

I attached the Cardstock with the Frog to the inside cover of the box with Liquid Glue.

I cut a  2"  Scalloped Circle from Gorgeous Grape Cardstock using the Layering Circle dies.

I cut a 2 1/8" Stitched Circle from Granny Apple Green Cardstock using the Stylish Shapes dies.

I attached the circles together largest to smallest, Witch image on top, with Liquid Glue.

I attached the Circles onto the front part of the Strip with Liquid Glue.

I tied Glittered Organdy Ribbon around the Spine of the Box and tied a bow on the outside.  I secured the knot of the bow to the box with a Glue Dot.

I added some Wink of Stella Glitter to the Witch Hat and Cape.

For the final touch I added 3 Iridescent Rhinestone Basic Jewels to the front the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Best Witches stamp set

Stylish Shapes dies

Layering Circle dies

Black & White Designs Designer Series Paper

Gorgeous Grape Cardstock

Basic Black Cardstock

Granny Apple Green Cardstock

Basic White Cardstock

Tuxedo Black Ink

Stampin' Blends

Glittered Organdy Ribbon

Iridescent Rhinestone Basic Jewels

Wink of Stella

Liquid Glue

Glue Dots

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Candy Book.

See you next time!

Love and Hugs,

Cathryn

SCARY SILHOUETTES WINDOW BOX with STYLISH SHAPES DIES - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Window Box that measures  5  x  3  x  1 1/2".  I used the Scary Silhouettes dies, Stylish Shapes dies, Tailor Made Tags dies, Scary Cute stamp set and Gingham Cottage Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Gingham Cottage Designer Series Paper sized

9 1/2  x  6 1/2".

I scored the  9 1/2" side at:

1/2,  3 1/2,  5  and  8".

I scored the  6 1/2" side at:

1 1/2".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your DSP should look after scoring and cutting.

For the top of the box I used a piece of Brights - Mango Melody - Designer Series Paper sized

3  x  2 1/2".

I scored ONLY the 2 1/2" side at:

1 1/4".

I attached the piece to the back/top of the box with Liquid Glue.

I cut the Window int the front of the box with a 1 7/8  x  1 7/8" Square die from the Stylish Shapes dies.

I covered the opening with a piece of Window Sheet, sized 2 3/4  x  2 3/4", using Liquid Glue.

I stamped the sentiment, from Scary Cute stamp set, onto Basic White Cardstock using Tuxedo Black Ink.

I cut a tag out of the Cardstock, making sure to put the sentiment at the top, using the Tailor Made Tag dies.

I cut a 1/2" off the bottom of the tag.

I cut a Cat from Metallic & Shimmer Specialty Paper and 2 small Bats from Basic Black Cardstock using the Scary Silhouettes dies.

I cut a 1 1/4" circle from Crushed Curry Cardstock using the Stylish Shapes dies.

I cut a small piece of Parakeet Party Cardstock and attached it behind the Cat's  eyes with Liquid Glue.

I attached the Moon circle under the left side of the sentiment with a tiny bit hanging over the left side of the tag.

I attached the Cat to the bottom of the tag and the Bats near the Moon.

I attached everything using Liquid Glue.

I wound Mesh Metallic Ribbon around the long side of the box and tied a knot in the front in the middle of the Mango Melody Paper.

I put Both sides of the ribbon through the hole in the tag and tied a bow.

For the final touch I added 3 Matte Black Dots to the upper left side of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Scary Silhouettes dies

Stylish Shapes dies

Tailor Made Tags dies

Scary Cute stamp set

Gingham Cottage Designer Series Paper

Metallic and Shimmer Specialty Paper

Brights Designer Series Paper

Basic White Cardstock

Basic Black Cardstock

Crushed Curry Cardstock

Parakeet Party Cardstock

Metallic Mesh Ribbon

Matte Black Dots

Tear and Tape

Liquid Glue

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Window Box.

See you next time!

Love and Hugs,

Cathryn

NO CUT HALLOWEEN TREAT BOX with SCARY CUTE STAMP SET - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Halloween Treat Box that measures  3 1/2  x  2 3/4  x  1/2".  I used Scary Cute stamp set, Blossoming Happiness dies, Layering Circle dies and Celebrate Everything Host Designer Series paper.

You can watch my Video Tutorial Here!

I started with a piece of Pumpkin Pie Cardstock sized

7  x  2 3/4".

I scored the 7" side only at:

1,  3  and  3 1/2".

I cut the 1" strip about 1/8" from the edge with a border die from the Blossoming Happiness dies.

To put the box together you can watch my Video Tutorial here.

Below is a picture of how your Cardstock should look after cutting the border and rounding the corners of the top.

I attached 3 pieces of Celebrate Everything Host Designer Series Paper to the box.

(1)  2 1/2  x  3 1/4"  inside back of the box.

(1)  2 1/2  x  1 3/4"  front of the box.

(1)  2 1/2  x  1/2"  top/front strip.

I attached the DSP to the box with Liquid Glue.

I stamped the Frankenstein image, from Scary Cute stamp set, onto Parakeet Party Cardstock using Tuxedo Black Ink.

I cut the image out using a  1 5/8" circle die from the Layering Circle dies.

I cut a 1 3/4" scallop circle die from Pumpkin Pie Cardstock and attached it to the back of the Parakeet Party circle with Liquid Glue.

I wound Black & White Gingham Ribbon around the box, under the front flap, and tied a bow on the right side.

I attached the image circle to the front, onto of the flap, with Dimensionals.

I stamped the sentiment, from Scary Cute stamp set, onto Crushed Curry Cardstock with Tuxedo Black Ink.

I cut the sentiment out by hand and attached it to the upper right side of the flap with Liquid Glue.

For the final touch I added 3 Parakeet Party 2022-2024 In color Matte Decorative Dots around the bottom of the front of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Scary Cute stamp set

Blossoming Happiness dies

Layering Circle dies

Celebrate Everything Host Designer Series Paper

Pumpkin Pie Cardstock

Parakeet Party Cardstock

Crushed Curry Cardstock

Tuxedo Black Ink

Black & White Gingham Ribbon

2022-2024 In Color Matte Decorative Dots

Liquid Glue

Dimensionals

Simply Scored

Take Your Pick Tool

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Project.

See you next time!

Love and Hugs,

Cathryn

HALLOWEEN WINDOW BOX for KITKAT BARS with the GNOMES DIES - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends! My project today is a Window Box that holds 4 Fun Sized KitKat bars. It measures 2 3/4 x 3 3/4 x 5/8". I used the Gnomes dies, Scary Silhouettes dies, Rectangle Stitched dies, Fabulous Frames dies, Scary Cute stamp set and Black & White Designs Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Pumpkin Pie Cardstock sized 9 1/4 x 4 1/2"

I scored the 9 1/4" side at: 1, 5/8, 4 3/8, 5 and 8 3/4". I scored the 4 1/2" side at: 5/8, 3 3/8 and 4".

To cut and put the box together you can watch my Video Tutorial Here!

Below is a picture of how your Cardstock should look after scoring and cutting.

Before I put the box together I added the Designer Series Paper to the box with Stampin' Seal.

Black & White Designs Designer Series Paper

(2)  2 1/2  x  3 1/2  for the front and back of the box.

Next I cut the Window out of the the box with a 2 7/8 x 7/8" rectangle die from the Rectangle Stitched dies.

I attached a piece of Window Sheet inside the box sized

1 1/2 x 3 1/2".

I attached it with a very thin line of Liquid Glue.

Below is a picture of how the Cardstock should look with the DSP attached and the Window cut out.

I cut the Gnome out of DSP and a few colors of Cardstock.

Gnome Hat  Black & White Designs DSP

Beard   Smokey Slate Cardstock

Nose From Petal Pink Cardstock

Feet  Gorgeous Grape Cardstock

I attached the pieces together with Liquid Glue and using my Silicone Mat.

I attached the Gnome to the front of the box, next to the window, with Dimensionals and Mini Dimensionals.

I stamped the sentiment, from Scary Cute stamp set, onto Pumpkin Pie Cardstock with Tuxedo Black Ink.

I stamped only the top of the sentiment by dipping only the top in the ink.

I cut the sentiment out with a label die from the Fabulous Frames dies.

I attached the label to the middle of the Gnome with Liquid Glue.

I cut 3 large bats from Basic Black Cardstock using the Scary Silhouettes dies.

I bent them in the middle, rolled some Glue Dots and attached one under each wing and then a dot of Liquid Glue on the middle.

I attached them along the sides of the Window.

For the final touches I added 2 Matte Black Dots to the sides of the label and Rhinestone Basic Jewels to the middle of the Bats.

You can shop for your Stampin' Up! supplies with Me here.

Supplies: Gnome dies Scary Silhouettes dies Rectangle Stitched dies Fabulous Frames dies Scary Cute stamp set Black & White Designs Designer Series Paper Brights Designer Series paper Pumpkin PIe Cardstock Basic Black Cardstock Smokey Slate Cardstock Petal Pink Cardstock Window Sheets Light Flirty Flamingo Stampin' Blend Dark Petal Pink Stampin' Blend Stampin' Seal Tear and Tape Liquid Glue Dimensionals Mini Dimensionals 1" Circle Punch Thank you for visiting my Channel today. I hope you enjoyed my KitKat Window box. See you next time! Love and Hugs, Cathryn

QUICK & EASY FUN SIZED HALLOWEEN TREAT BOX with the WITCH HAT BUILDER PUNCH - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Halloween Treat Box that will fit 2 fun sized candy bars.  I used the Witch Hat Builder Punch, Scary Cute stamp set, Scary Silhouettes dies and Celebrate Everything Host Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Parakeet Party Cardstock sized

8 1/2  x  4 1/4"

I scored the  8 1/2" side at:

3 1/2,  4 1/2  and  8".

I scored the  4 1/4" side at:

1  and  3 1/4".

To cut and put the box together you can watch my Video Tutorial Here.

Below is a picture of how your Cardstock should look after scoring and cutting.

I attached Celebrate Everything Host Designer Series Paper to the box.

(2)  2  x  3 1/4"  for the front and back of the box.

I attached the DSP to the box with Liquid Glue.

I punched the Witch Hat from Basic Black Cardstock using the Witch Hat Builder Punch.

I punched the Hat Band from Gorgeous Grape Cardstock.

I punched the stars from Parakeet Party Cardstock.

I attached the Hat Band and Starts to the Hat with Liquid Glue.

I punched 2 holes in the front flap and matching ones in the front body of the box with a small hole punch.

I ran Black & White Gingham Ribbon through the holes and tied a bow at the front.

I stamped the Sentiment, from Scary Cute stamp set, onto Basic White Cardstock with Tuxedo Black Ink.

I cut the sentient out using a 1 3/8" circle from the Layering Circles dies.

I cut a 1 1/2" scalloped circle from Gorgeous Grape Cardstock.

I attached them together with Liquid Glue.

I attached the sentiment to the lower right side of the box with Liquid Glue.

Next, I attached the Witch Hat with Dimensionals.

I cut 3 Bats from Basic Black Cardstock using the Scary Silhouettes dies.

I attached the Bats around the Sentiment with Liquid Glue.

I brushed Wink of Stella Glitter onto the black sections of the Witch Hat and for the final touch I added 3 Gorgeous Grape Glossy Dots around the front of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Witch Hat Builder Punch

Scary Cute stamp set

Scary Silhouettes stamp set

Layering Circle dies

Celebrate Everything Host Designer Series Paper

Parakeet Party Cardstock

Basic Black Cardstock

Gorgeous Grape Cardstock

Basic White Cardstock

Tuxedo Black Ink

Black & White Gingham Ribbon

Glossy Dots Assortment

Wink of Stella

Dimensionals

Liquid Glue

Tear and Tape

Simply Scored

Take Your Pick Tool

Small Hole Punch

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Treat Box.

See you next time!

Love and Hugs,

Cathryn

HALLOWEEN TREAT TOTE with BEST WITCHES - Stampin' Up!

Shop Stampin' Up! Here

Hi Friends!

My project today is a Halloween Treat Tote that measures  4 1/4  x  2  x  4".  I used Best Witches stamp set, Rectangle Stitched dies, Scary Silhouettes dies, Gingham Cottage Designer Series paper and 2022-2024 In Color Matte Decorative Dots.

You can watch my Video Tutorial Here!

You need 2 pieces of Basic Black Cardstock for this project.

I started with a piece sized

8 1/4  x  6".

I scored the  8 1/4" side at:

2  and  6 1/4".

I scored the  6" side at:

2  and  4".

The second piece is sized

9 3/4  x  4 1/4".

I scored only the  9 3/4" side at:

7/8,  4 7/8  and  8 7/8".

To cut and put the box pieces together you can watch my Video Tutorial Here.

Below are pictures of how your Cardstock should look after scoring, cutting and cutting he handles in the top piece with a  2 7/8 x 7/8" rectangle die from the Stitched Rectangle dies.

I attached several pieces of Gingham Cottage Designer Series Paper to the box.

(2)  3 7/8  x  3 7/8"  for the insert.

(2)  4  x  1 3/4"  for the long sides.

(2)  1 3/4  x  1 3/4" for the short sides.

I attached the DSP to the box with Liquid Glue.

I stamped the Witch image, from Best Witches stamp set, onto Basic White Cardstock with Tuxedo Black Ink.

I colored the image with Stampin' Blends.

Light Flirty Flamingo   the Cheeks.

Dark Petal Pink   the Face and Hands.

Light Basic Black    the Hat, Cape and Cauldron.

Dark Highland Heather   Hat Band and Dress.

Light Granny Apple Green  Hair.

Light Soft Suede   Logs.

Dark Pumpkin Pie and Dark Daffodil Delight   Fire.

I fussy cut the images out by hand.

I stamped the sentiment, from Best Witches stamp set, onto Highland Heather Cardstock with Tuxedo Black Ink.

I cut the sentiment out with a label from the Scary Silhouettes dies.

I attached the Witch and Cauldron to the right side of the box and the Sentiment to the upper left.

I attached them with Liquid Glue.

I tied Metallic Mesh Ribbon around the top/right side of the handle and tied a bow.

I added some Wink of Stella Glitter to the Witch's Hat and Cape.

For the final touch I added Parakeet Party 2022-2024 In Color Matte Decorative Dots to the front of the box.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Best Witches stamp set

Rectangle Stitched dies

Scary Silhouettes dies

Gingham Cottage Designer Series Paper

Basic Black Cardstock

Highland Heather Cardstock

Basic White Cardstock

Stampin' Blends

Metallic Mesh Ribbon

2022-2024 In Color Matte Decorative Dots

Wink of Stella

Simply Scored

Take Your Pick Tool

Liquid Glue

Thank you for visiting my Blog today.  I hope you enjoyed my Halloween Tote.

See you next time!

Love and Hugs,

Cathryn