Warm and Toasty Candy Bar Box - Stampin' Up!

Shop Stampin' Up! Here.

Hi Friends!

My project today is a box for a Russell Stover Chocolate bar.  The box measures 6 1/4 x 2 3/4 x 3/8". I used Warm and Toasty Stamp set, Hippo and Friends dies, Little Treat Box dies Stitched Circle dies and Tis' the Season Designer Series Paper.

You can watch My Video Tutorial Here!

I started with a piece of Real Red Cardstock sized  8 1/2  x  6 5/8".

I scored the  8 1/2"  side at:

1 1/2,  1 7/8  and   8 1/8".

I scored the  6 5/8"  side at:

3/8,  3 1/8,  3 1/2  and 6 1/4".

To cut,  put the box together and cut the circle in the flap you can watch my Video Tutorial here.

'

I attached Tis' the Season Designer Series paper to the box in sizes:

(2)   2 1/2  x  6"

and

I cut a scrap of the same DSP with a 2 1/2" Circle punch to about 2/3 of the circle.

I matched it up with the front flap and made a pencil mark on each side where I wanted to cut the excess off.

I attached all the DSP to the box with Stampin' Seal.

I attached Adhesive Slim Velcro Dots to the inside flap and top of the inside of the box.

I stamped the sentiment from Warm and Toasty stamp set with Real Red Ink onto a 1 3/8" circle I punched out of a piece of the same DSP pack.

I cut a Scallop Circle out of Real Red Cardstock using the Little Treat Box dies.

I attached the sentiment to the Scallop Circle with Liquid Glue.

I tied a bow with Mesh Metallic Ribbon.  I punched a hole in the top of the Sentiment piece and tied some White Baker's Twine through the hole.  I tied it onto the Metallic Bow.

I tied another bow with Real Red Braided Linen Trim and attached it the the Metallic bow OVER the Baker's Twine with a Glue Dot.

I put 2 Glue Dots on the back of the Metallic Bow and attached it all to the top flap of the box.

I cut 2 labels from the Hippo and Friends dies.  1 from Real Red Cardstock and a smaller one from the same DSP that I stamped the sentiment on.

I glued the DSP to the Cardstock with Liquid Glue.

I stamped the Reindeer image from Warm and Toasty stamp set onto Whisper White Cardstock with Tuxedo Black Ink.

I colored the image with the following Stampin' Blends:

Light and Dark Soft Suede for the Reindeer,

Light Crumb Cake for the antlers,

Dark Smokey Slate for the Hooves and

Light and Dark Real Red for the bow.

I fussy cut the Reindeer out and attached it to the top label with Liquid Glue.

I attached the entire piece to the box with Dimensionals.

You can shop for you Stampin' Up! supplies with ME here!

Supplies:

Warm and Toasty stamp set

Hippo and Friends dies

Little Treat Box dies

Stitched Shaped dies

Tis' the Season Designer Series Paper

2 1/2" Circle Punch

1 3/8" Circle Punch

Real Red Cardstock

Whisper White Cardstock

Tuxedo Black Ink

Metallic Mesh Ribbon

Real Red Braided Linen Thread

White Baker's Twine

Real Red Stampin' Pad

Dimensionals

Liquid Glue

Stampin' Seal

Tear and Tape

Simply Score Tool

Stampin' Blends:

Light and Dark Real Red

Dark Smokey Slate

Light Crumb Cake

Light and Dark Soft Suede

Slim Velcro Dots

That's it for me today!

See you next time.

Little Debbie CHRISTMAS TREE CAKE BOX with COMING HOME

Shop Stampin' Up! Here.

Hi Friends!

My project today is a rectangle box with a sleeve that I made to fit a Little Debbie Snack Cake.  It will also fit 3 Ferraro Rocher, a mini Liquor bottle or any other small gift.  I used Coming Home stamp set, Home Together dies, Tasteful Label dies, Snow Time dies and Heartwarming Hugs Designer Series Paper.

You can watch my Video Tutorial Here!

I started with a piece of Mossy Meadow Cardstock sized

7 3/4  x  6 1/2".

I scored the  7 3/4"  side at:

1 1/2  and  6 1/4".

I scored the  6 1/2" side at:

1 1/2,  3,  4 1/2  and  6".

To cut and put the box together you can watch my Video tutorial Here.

To make the sleeve I used a  6 3/4  x  3 3/4"  piece of Heartwarming Hugs Designer Series Paper.

I wrapped the paper around the closed box snuggly but not too tight to be able to slide off.

I removed the paper and Burnished the folds I made with my fingers with my Bone Folder.

I attached the sleeve at the bottom of the box together with Stampin' Seal.

I cut a label out of Mossy Meadow Cardstock with one of the Snow Time dies.

I embossed a scrap of Real Red Cardstock with one of the Wrapped in Texture Embossing Folder.  Then I cut out a label with a die from Tasteful Label dies.

I wrapped gold thread from the Forever Greenery Ribbon Combo Pack around the labels, as shown in the picture, and used scotch tape to secure it on the back of the labels.

I attached the labels to the top of the box sleeve with Dimensionals.

I stamped 1 large tree and 2 small trees from the Coming Home stamp set onto Pear Pizzazz Cardstock with Mossy Meadow Ink.

I cut them out with the corresponding dies from Home Together dies.

I attached the trees to the box with Dimensionals.

I added Wink of Stella to the trees and some Real Red Rhinestone Basic Jewels.

You can shop for your Stampin' Up! Supplies with Me here!

Supplies:

Heartwarming Hugs Designer Series Paper

Coming Home stamp set

Home Together dies

Tasteful Label dies

Snow Time dies

Mossy Meadow Cardstock

Real Red Cardstock

Wrapped In Texture Embossing Folder

Forever Greenery Ribbon Combo Pack

Mossy Meadow Stampin' Pad

Detail Trio Punch

Red Rhinestone Basic Jewels

Dimensionals

Liquid Glue

Tear and Tape

Stampin' Seal

Simply Score Tool

Thank you for coming by.

See you next time!

Candle Gift Box with Trimming the Town - Stampin' Up!

Shop Stampin' Up! here.

Hi Friends!

My project today is a gift box for a small candle jar.  I got the candle at Marshalls for about $3.  The box measures  5  x  2 1/2  x  2 1/2".  The candle is approximately  3 3/4  x  2 1/4".  I used Coming Home stamp set, Home Together dies, Joyful Holly stamp set, Trimming the Town Designer Series Paper, Layering Circle dies and Stitched Shape dies.

You can watch my Video Tutorial Here!

I started with a piece of Old Olive Cardstock sized  10 1/2  x  8 1/4".

I scored the 10 1/2" side at:

1/2,  3,  5 1/2  and  8".

I scored the 8 1/4" side at:

2  and  5 3/4".

To cut and put the box together you can watch my video tutorial here.

I punched 2 holes in the flaps at the top of the box.  I put my candle inside and closed it with a piece of Real Red Sheer Ribbon tied in a bow at the front.

I attached 4 pieces of Trimming the Town Designer Series Paper to the 4 sides of the box sized 2 1/4  x  5 1/2".

I die cut the house and small tree from Trimming the Town Designer Series Paper using the Home Together dies.

I stamped the wreath using Coming Home stamp set and cut it with the corresponding die.

I colored the wreath with Dark Real Red and Light Mossy Meadow Stampin' Blends.

I cut the Blue DSP Circle and Real Red Cardstock Scallop Circle using the Layering Circle dies.

I attached the Blue Circle to the Red Scallop Circle with Liquid Glue.  Then I attached the house and Tree to the Blue Circle also with liquid glue.

I attached the Wreath to the middle of the roof with Liquid Glue.

I cut an Oval out of Real Red Cardstock using the Stitched Shapes dies.

I stamped the sentiment from Joyful Holly stamp set, with Tuxedo Black Ink, onto the oval.

I cut a sprig of greenery from Mossy Meadow Cardstock with the Beautiful Boughs dies and glued it to the back of the oval label.

I punched a hole in the side of the scallop and tied it to the box with Gold Cord from Wonder of the Season Ribbon Combo Pack.

For the final touch I added Wink of Stella to the Sprig of Greenery and the Wreath.

You can shop for your Stampin' Up! supplies with Me here!

Supplies:

Coming Home stamp set

Home Together dies

Joyful Holly stamp set

Layering Circle dies

Stitched Shape dies

Trimming the Town Designer Series Paper

Beautiful Boughs dies

Detail Trio Punch

Old Olive Cardstock

Real Red Cardstock

Dark Real Red Stampin' Blend

Light Mossy Meadow Stampin' Blend

Sheer Red Ribbon

Wonder of the Season Ribbon Combo Pack

Wink of Stella

Stampin' Seal

Tear and Tape

Dimensionals

Liquid Glue

Tuxedo Black Ink

Simply Score Tool

Thank you so much for visiting my blog!

See you next time.

`

Freezin' Fun KitKat Box - Stampin' Up!

Shop Stampin' Up Here!

Hi Friends!

My project today is a box I made to fit a Holiday KitKat bar.  You can also fit a gift card inside along with the candy!  You can get two of these boxes from one 8 1/2  x 11" sheet of Cardstock.  I used Freezin' Fun stamp set, Freezin' Friends dies, Snowflake Splendor Designer Series Paper, Banners Pick a Punch and the Detail Trio Punch.

You can watch my Video Tutorial Here!

I started with a piece of Misty Moonlight sized  9 1/2  x  3 3/4".

I scored the 9 1/2" side at:

1/2,  1,  5,  and 5 1/2".

I scored the 3 3/4" side at:

1/2  and  3 1/4".

To cut and put the box together you can watch my video tutorial here.

I stamped the Large Tree and Bunny Images on Whisper White Cardstock with Tuxedo Black Ink.  I colored the tree with a Light Shaded Spruce Stampin' Blend.

For the Bunny I used these Stampin' Blends:

Light Balmy Blue

Light Flirty Flamingo

Light Highland Heather

Light Smokey Slate

Light Petal Pink

Color Lifter

I cut the Images out with the corresponding dies from Freezin' Friends dies.

I attached 2 pieces of Snowflake Splendor DSP sized:

3 3/4  x  2 1/2.

I attached them to the front and back of the box with Stampin' Seal.

I cut a  3 3/4  x  1 1/4"  piece of Whisper White Cardstock with the long die to make the hill.

I attached the hill piece to the bottom-front of the box with Liquid Glue.

I attached the tree with Liquid Glue and the Bunny with Dimensionals.

I tied a bow with Snowflake Splendor Ribbon and attached it to the top of the box with a Glue Dot.

I cut another piece of the DSP to  1/2  x  1 3/4".

I stamped the sentiment on the strip and flagged the end with the Banners Pick a Punch.

I attached it to the lower left of the box with Liquid Glue.

For the final touches I added some Adhesive Backed Snowflakes to the Tree and Blue Adhesive Back Gems to the lower right of the box.

You can shop for your Stampin' Up! supplies with Me here!

Supplies:

Freezin' Fun stamp set

Freezin' Friends dies

Snowflake Splendor Designer Series Paper

Banners Pick a Punch

Detail Trio Punch

Misty Moonlight Cardstock

Whisper White Cardstock

Snowflake Splendor Ribbon

Adhesive Backed Snowflakes

Blue Adhesive Backed Gems

Tuxedo Black Ink

Stampin' Blends:

Light Shaded Spruce

Light Balmy Blue

Light Flirty Flamingo

Light Highland Heather

Light Smokey Slate

Light Petal Pink

Color Lifter

Stampin' Seal

Tear and Tape

Liquid Glue

Take Your Pick Tool

Simply Score Tool

I hope you  like my project today, thank you for coming by.

See you next time!

Pink Poinsettia Chocolate Treat Box - Stampin' Up!

Shop Stampin' Up! here

Hi Friends!

My project today is a Pink Poinsettia box I made to fit some Baci/Periguina Chocolates.  The box is   4 3/4  x  2 3/8  x  1 1/4" in size.  A gift card and many other candies will also fit.  I used Poinsettia Petals stamp set, Poinsettia dies, Wrapped in Texture Embossing folders and Beaded Pearls.

You can watch my Video Tutorial here!

I started with a piece of Blushing Bride Cardstock sized

8 1/2  x  7 1/4".

I scored the  8 1/2"  side at:

1 1/4,  3 5/8,  4 7/8  and  7 1/4".

I scored the 7 1/4" side at:

1 1/4  and  6".

To cut and put the box together you can watch my video tutorial here.

I added two layers of Cardstock to the box.

Mossy Meadow Cardstock sized:

(1)  4 5/8  x  2 1/4"

(2)  4 5/8  x  1 1/8"

(2)  1  x  2 1/8"

Soft Seafoam Cardstock sized:

(1)  4 1/2  x  2 1/8"

(2)  4 1/2  x  1"

(2)  1  x  2 1/8"

I embossed the Soft Seafoam Cardstock with the dots Embossing Folder from Wrapped in Texture Embossing Folders.

I attached the side pieces of Cardstock to the box with the Mossy Meadow Cardstock over the Soft Seafoam Cardstock.  I added the Chocolates to the box and

I tied White Metallic Edged Ribbon around the box and tied a bow on the side over the finger hole.

I attached the top piece over the Ribbon with Dimesionals.

I stamped the Poinsettia images onto Blushing Bride Cardstock with Blushing Bride ink,  2 of the largest, 1 of the middle size and 1 of the next smaller size.

I cut the images out with the corresponding Poinsettia dies.

I stamped the leaves on Mossy Meadow Cardstock with Mossy Meadow Ink,  2 of the large leaf and 1 of the smaller.

I cut 1 of the sprig pieces out of Silver Foil Paper.

I attached the Flower Petals together with Glue Dots.

I attached the leaves and sprig first with Liquid Glue and then the flower.

For the final touches I added a Beaded Pearl in the middle of the flower and added Wink of Stella on the petals.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Poinsettia Petals stamp set

Poinsettia dies

Wrapped in Texture Embossing Folders

Blushing Bride Cardstock

Soft Seafoam Cardstock

Mossy Meadow Cardstock

Silver Foil Paper

Blushing Bride Stampin' Pad

Mossy Meadow Stampin' Pad

Beaded Pearls

Wink of Stella

Stampin' Seal+

Stampin' Seal

Dimensionals

Liquid Glue

Glue Dots

Metallic Edged Ribbon

Simply Score Tool

Take Your Pick Tool

I hope you enjoyed my project today.  Thank you for stopping by.

See you next time!

Masculine Gift Box with Brightly Gleaming

Shop Stampin' Up! with Me Here

Hi Friends!

My project today is a two piece gift box that is

3 3/4  x  3 3/4  x  2 1/4".

I made this box for my son so I tried to make it look a bit masculine.  It can also be made in other Christmas Papers or for any occasion.  I used Brightly Gleaming Specialty Paper, Perfectly Plaid stamp set and Snow Time dies.

You can watch my video tutorial here!

I started with a piece of Mossy Meadow Cardstock for the bottom of the box sized  9 3/4  x  8 1/4".

I scored the  9 3/4"  side at:

3 3/4  and  6"

I scored the 8 1/4" side at:

2 1/4  and  6"

For the top of the box I used a piece of Brightly Gleaming Specialty paper sized

6  13/16  x  5  5/16

(just over  6 3/4   x  just over  5 1/4")

I scored all four sides at  1 1/2"

To cut and put the box together you can watch my video tutorial here.

After I put the 2 pieces of the box together I added some Christmas socks for my son inside.  You can fit many other various gifts plus a gift card too!

I tied Diagonal Striped Mossy Meadow Ribbon around the sides of the box and tied a bow at the top.

I used Snow Time dies for both of the labels on the front of the box.

I cut the larger label out of Gold Foil Paper and the smaller label out of Very Vanilla Cardstock.

I stamped the sentiment from Perfectly Plaid stamp set on the Very Vanilla Label with Mossy Meadow Ink.

I attached the sentiment label to the larger label with 3 glue dots on the back.

I attached the entire piece to the front of the box with Dimensionals.

You can shop for your Stampin' Up! supplies with Me here.

Supplies:

Brightly Gleaming Specialty Paper

Perfectly Plaid stamp set

Snow Time dies

Mossy Meadow Cardstock

Very Vanilla Carstock

Gold Foil Paper

Mossy Meadow Stampin' Pad

Diagonal Stripe Mossy Meadow Ribbon

Stampin Seal +

Glue Dots

Dimensionals

Simply Score tool

Take your pick tool

I hope you liked my project today, thank you for stopping by.

See you next time!

Merry Christmas Truffle Bar Box with Stampin' Up!

Shop Stampin' Up! here.

Hi Friends!

My project today is a very long skinny box that is  7 3/4  x  1  x  3/4".  I designed it to fit a Lindor Truffle Candy Bar.  I used Festive Corners stamp set, Warm Hugs stamp set, Toile Tidings Designer Series Paper and the Banners Pick a Punch.

You can watch my video tutorial here!

I started with a piece of Toile Tidings DSP sized  9 1/4  x  4".

I scored the 9 1/4" side at:

3/4  and  8 1/2"

I scored the 4" side at:

1/2,  1 1/2,  2 1/4  and  3 1/4"

To cut and put the box together you can watch my video tutorial here.

Once the box was cut and put together with Tear and Tape I punched a hole in the top with a 1/8" hole punch.  I ran Real Red Sheer Ribbon through the hole and tied a bow at the front.

I cut a piece of Very Vanilla Cardstock sized  1/2  x  3".

I stamped 3 Christmas Trees with the stamps from Warm Hugs stamp set.

I stamped the outline with Garden Green Ink and the inner tree with the same ink "stamped off" 1 time.

I cut a piece of Garden Green Cardstock sized 5/8  x  3 1/8".

I cut both sides of the pieces with the Banners Pick a Punch.

I attached the stamped piece on top of the Garden Green Piece with Liquid Glue.

I cut a piece of Very Vanilla Cardstock sized  1/2  x  3 1/2".

I stamped the "MERRY" with Real Red ink in the center of the paper.

I cut a piece of Garden Green Cardstock and a piece of Red Foil Paper to  5/8  x  3 5/8"  each.

I cut the bottom of all 3 papers ,with the inward flag side of the Banners Pick a Punch.

I attached the sentiment cardstock piece to the Garden Green Cardstock piece with Liquid Glue.

I punched a hole in the Red Foil paper and Sentiment with a 1/8" hole punch.

I strung them on a piece of Gold Cord, from Wonder of the Season Ribbon Combo Pack, and tied it around the bow at the top of the box.

For the final touch I added a Real Red Rhinestone Basic Jewel at the top of all 3 Christmas Trees.

You can shop for your Stampin' Up! supplies with Me Here!

Supplies:

Festive Corners stamp set

Warm Hugs stamp set

Toile Tidings Designer Series Paper

Banners Pick a Punch

Garden Green Stampin' Pad

Real Red Stampin' Pad

Real Red Sheer Ribbon

Wonder of the Season Ribbon Combo Pack

Real Red Cardstock

Very Vanilla Cardstock

Garden Green Cardstock

Red and Green Foil Sheets

Tear and Tape

Take Your Pick Tool

Liquid Glue

Simply Score Tool

I hope you enjoyed my project today.

See you next time!